I don't know if anyone commented on this before but here goes: That fire extinguisher is already set in place but if you ever actually need it (GOD forbid) it should be either set into the side closer to the gate in the bed or mount another one somewhere in the cab easy to get to.
thats a sick ass truck mines gonna be similar to yours but its a 2000 chevy swb and i would like to go with a 427 TT im thinking. Strong motor though man good job.
i see you have a quick fuel carb. are you satisfied with it cause ive actually got the same one but havent fired it up yet. any negative side affects?
@bizzybone485 In this video I'm running shorty headers into 3inch x-pipe,into 70 series delta force(flow masters).Then it is dumped before the rear axle.Now I have hedman long tube headers(69440),sounds alot better,and runs stronger.
perfect!! , whats the drop kit? and if ya could whats a ballpark price on the build for this? im looking at doing a similar project, been raised around custom chevys my whole life, my turn to join the fun!
my 91 has 9.5-1 compressional too. its a 383 with all eagle internals. Mines still TBI though. 18 mpg on the highway. what kind of heads are u running?
@MIKEFROSTED The police cruisers from I think 94 to 97 or 8 all have LT1's and even Buick Roadmasters along with other full size luxury cars have'em too. The 03 Suburban deal would be good but if your going that route just find a newer Suburban or Chevy pickup with an iron blocked LS2 in it. Either way you go all of these engines will make ur Cap. pretty peppy.
@MIKEFROSTED Do the LT1 swap. You can findem pretty easy now cuz everyone wants the LS motors. Here in Texas an LT1 and trans with computer would run you about 1,000 bucks but the motor might have some hard miles on it. Nuthin a cheap rebuild wouldnt take care of though.
And who is "us", are you speaking for youtube? Is that like a motivational speech to make me change the way I talk about your Caprice? Hopefully you will be "riding dirty" in no time, I'm sorry you got butt hurt.... Head on over to 'Rent-a-Rim' and get some 26"s.... You deserve them, you're number one bro.
ajajajaja awsome burn ho did you do that..or is it just the 6.2 liter engine i have a 350 with a mid cam in my automatic 1986 Monte Carlo SS and im haveing trouble tryn to even do a sitting burnout. i just hold the break and step on the gas but it wont do anything it does do some burns when i take fast U turns thos...is there a easyer ways to do it with an automatic transmition....
@totalybitchn try easying off the brake a tad without full throttle then start rolling slowly then at the same time punch your throttle and hit the brake. you should be able to get one that way
@totalybitchn theres an art to doing power brake burnouot. you cant just stomp on the brake and then punch the gas. You have to ease into the brake and ease into the gas.
good call on the sonys and why would he stop, the point wasn't to make smoke it was to show us his truck could snap em loose at 25 mph. Way Sicker!! Guy make some more videos
nice truck. i got one that i hope to be doin some work to soon. its a 89 with a 305 tbi. ima put on some 350 heads and a fat cam. just a mild streed beast.
Hey i dont care wat da ppl say below me i luv da truck all da around not only its a show truck he drives it n put his foot in 2 it show wat dat motor can do
I should be droppibng a 383 CId vortec stroker what all do u advise me to do... like rebuild or replace... I know my tranny will need rebuilt but rear end? plus man thats a nice truck love the paint and how u dressed the engine
thats an amazing ride, i love the paint job, the front end, the rear end, the interior, the center console, i love ur engine, 383 Stroker, thats a Wild Engine which give around 400 HP, and u got a nice wheels, dude, when u get a 383 stroker, u shud change the fuel cell? or its optional? or u can just change the fuel pump?
naw man changin the motor in anything doesnt mean u need to change ur fuel tank... they mostly do that for lighter weight... or in this trucks case looks...
im sorry to haveto tell you this but have you ever seen a ROLLING burnout? just because the vehicle is not sitting still and burning rubber doesnt mean its not a burnout
I love this truck ! I want to build something like it. I got a 500hp, 500 torque 383 built by Rebello Racing, cost 10k that I,m looking for a truck to put it in
very nice truck man exelent job
SuperKTMrider1 1 week ago
Bad ass. Whet type of cam and duration specs. Also what type of exhaust?
07THE19 4 weeks ago
what cam do you have?
renobelmares 2 months ago
is it reall yonly 3700lbs? my 95 trans am was 3700lbs!
Ls7colorado 4 months ago
This has been flagged as spam show
thats bad ass dud whats ur cam in dration on that
azjeffhotrod 4 months ago
Comment removed
azjeffhotrod 4 months ago
I don't know if anyone commented on this before but here goes: That fire extinguisher is already set in place but if you ever actually need it (GOD forbid) it should be either set into the side closer to the gate in the bed or mount another one somewhere in the cab easy to get to.
Just a suggestion.
SummitDynamics 4 months ago
ya i wanna put a 4 speed stick so bad
bruce14able 5 months ago
What kind of rear end you running?
prizonlizzard 5 months ago
OH! Its an auto, ruins the whole truck!
ika6667 5 months ago
727 turqe flyte 3 speed auto
bruce14able 5 months ago
nice me and my dad are building a 1966 dodge 383 with 500 hp nd putting it in to a 1980 dodge apen its gunna be my first car
bruce14able 5 months ago
what kind of tranny u useing
w8e0s6t 5 months ago
hows the wheel hop in this thing? I'd imagine it would be pretty bad unless you did suspension work
stratdude83 6 months ago
what transmission and stall converter do you have in the truck??thanks
yello454 6 months ago
Beast!!
girlchocolatejt 7 months ago
thats a sick ass truck mines gonna be similar to yours but its a 2000 chevy swb and i would like to go with a 427 TT im thinking. Strong motor though man good job.
Zachwheeler88 8 months ago
who made your speaker box
TheMarcos420 8 months ago
This has been flagged as spam show
damn bro i hope i can steal your idea of where you placed the subs hahaha, sweet!
i have a 93 burban, 350, that i wanna make a 383, i dont know much mechanics, but i know i wanna up my engine a bit
robertGuerra3 8 months ago
Comment removed
robertGuerra3 8 months ago
hp estimation?
Silveradofanatic 8 months ago
Rednecks with subwoofers where the center console is = Hillbilly douche bag.
philip21786 8 months ago
wow
itdontstop25 9 months ago
size of rims?
SuperDutyCummins 9 months ago
Did you get the airbar system?
Unicron2012 10 months ago
nice rig
SSFTC 10 months ago
i see you have a quick fuel carb. are you satisfied with it cause ive actually got the same one but havent fired it up yet. any negative side affects?
kameltyzzoe 11 months ago
@kameltyzzoe The carb is a quick fuel 750ss,the motor had a 750 edelbrock.BIG DIFFERENCE when I swapped them out.Your really going to like this carb.
1fastgmctruck 11 months ago
Sonbitch that der truck runs good.
clearcrap 11 months ago
Im curious what muffler/piping size/setup you are running. It sounds Really good!
bizzybone485 11 months ago
@bizzybone485 In this video I'm running shorty headers into 3inch x-pipe,into 70 series delta force(flow masters).Then it is dumped before the rear axle.Now I have hedman long tube headers(69440),sounds alot better,and runs stronger.
1fastgmctruck 11 months ago
What mufflers you runnin'?
renegado454 11 months ago
sounded like a turbo whine down toward the end when you let off the gas
gradxg 11 months ago
Im putting a 500hp 350 into my 1988 siverado. What type/size headers do you have running on your truck?
shorty8975 11 months ago
@shorty8975 I'M RUNNING THE HEDMAN 69440 (LONG TUBE)FROM JEGS.
92gmc383 11 months ago
@92gmc383 nice truck. where you bought you grill
oscaradiel 6 months ago
finally took my cuzzins for the maden voige and u hit the gas and all it dose is spinn but my cuzzin has a little bigger cam
bdkxkid 1 year ago
finally took my cuzzins for the maden voige and u hit the gas and all it dose is spinn
bdkxkid 1 year ago
sounds good
jmecrg 1 year ago
That's pretty low power output for a 383.
FordGarbage 1 year ago
@FordGarbage not really.
dtab321 1 year ago
@FordGarbage LOL, Depends on the parts and what the person wants. I think this is a great build.
Truckkin454 1 year ago
how much did you buy that engine for??
autoaude 1 year ago
what size cam?
E4059 1 year ago
if your selling this truck, can you email me at strcdan@yahoo.com..thank you
strcdan 1 year ago
Do the Detroit tru track. I have it I'm my 89. It's awesome and indestructible.
gmss89 1 year ago
perfect!! , whats the drop kit? and if ya could whats a ballpark price on the build for this? im looking at doing a similar project, been raised around custom chevys my whole life, my turn to join the fun!
MuayThaiFighter61 1 year ago
DAMN!!!!!
JonathanGuthridge 1 year ago
nice video.glad too see someone stay in the gas when it get squirally.
chevy350jr 1 year ago
can anyone tell me where can i get a 383 like dat i have a 92 silverado...nice truck badazz burnout
linapink19 1 year ago
my 91 has 9.5-1 compressional too. its a 383 with all eagle internals. Mines still TBI though. 18 mpg on the highway. what kind of heads are u running?
chughes44 1 year ago
@chughes44 It has the iron vortec heads 202 /160
92gmc383 1 year ago
@92gmc383 also i was think of puttin in a detroit trutrac with 3:73 gears. what are u running?
chughes44 1 year ago
@chughes44 i wish i got 18 on highway. i get bout 5 haha.
gotenks137690 9 months ago
@gotenks137690 i used to get 7 with my 454 vortec haha so i know how u feel
chughes44 9 months ago
@chughes44 haha. i jusst have a 350 tbi.
gotenks137690 9 months ago
@gotenks137690 ouch lol, there might be something wrong with it lol....
chughes44 9 months ago
@chughes44 lol maybe. im not sure whats under the valve covers and inside that block. but its quick.
gotenks137690 9 months ago
@gotenks137690 probably has 454 injectors on it
chughes44 9 months ago
@chughes44 yea i bet so.
gotenks137690 9 months ago
d d d d d damn, nice, what size cam and carb on it?
onlypresto 1 year ago
NICE
tropics305 1 year ago
@MIKEFROSTED The police cruisers from I think 94 to 97 or 8 all have LT1's and even Buick Roadmasters along with other full size luxury cars have'em too. The 03 Suburban deal would be good but if your going that route just find a newer Suburban or Chevy pickup with an iron blocked LS2 in it. Either way you go all of these engines will make ur Cap. pretty peppy.
jdubcbr600 1 year ago
@MIKEFROSTED Do the LT1 swap. You can findem pretty easy now cuz everyone wants the LS motors. Here in Texas an LT1 and trans with computer would run you about 1,000 bucks but the motor might have some hard miles on it. Nuthin a cheap rebuild wouldnt take care of though.
jdubcbr600 1 year ago
@MIKEFROSTED I think you're right, somebody wants attention...
BIGxMatt 1 year ago
@MIKEFROSTED I drive a 2000 Dodge Dakota R/T.
And who is "us", are you speaking for youtube? Is that like a motivational speech to make me change the way I talk about your Caprice? Hopefully you will be "riding dirty" in no time, I'm sorry you got butt hurt.... Head on over to 'Rent-a-Rim' and get some 26"s.... You deserve them, you're number one bro.
BIGxMatt 1 year ago
Nice work!!
blackmale78 1 year ago
@MIKEFROSTED yea sell the Caprice and don't put 24"s on it.
BIGxMatt 1 year ago
hay nice truck is that a throttle body or carb
90rick1 1 year ago
there is oonly one thing i can say. DAM
fishermankory 1 year ago
BAD ASS!! thats all I have to say.
TheArmslave 1 year ago
I've got one with the same bodystyle. I'm wanting to lose the 4.3 and switch over to an all aluminum small block. But I'm gonna keep the stock rims.
mikeb1444 1 year ago
nice nice nice!!!!love your truck bro..
93carlosc 1 year ago
wat kind of gears u running for ur rear end?
getmoneystaytrue100 1 year ago
I'M running a 373 gear 10 bolt
92gmc383 1 year ago
@getmoneystaytrue100 wat exhaust u running
allenkish 8 months ago
Absolutely a beautiful truck. Just wondering what kind of alternator you're running and where you got your side view mirrors from.
Thanks
ctdv55 1 year ago
love how it sounds!wat alllk u put in the motor it self?
patmildlimits 1 year ago
what exhaust u running?
RCbasheracer 1 year ago
ajajajaja awsome burn ho did you do that..or is it just the 6.2 liter engine i have a 350 with a mid cam in my automatic 1986 Monte Carlo SS and im haveing trouble tryn to even do a sitting burnout. i just hold the break and step on the gas but it wont do anything it does do some burns when i take fast U turns thos...is there a easyer ways to do it with an automatic transmition....
totalybitchn 1 year ago
@totalybitchn try easying off the brake a tad without full throttle then start rolling slowly then at the same time punch your throttle and hit the brake. you should be able to get one that way
yutubeloseruser 1 year ago
@totalybitchn theres an art to doing power brake burnouot. you cant just stomp on the brake and then punch the gas. You have to ease into the brake and ease into the gas.
Baseballstud5964 1 year ago
What color red paint did you go with on that? It looks good!
Mr88Chevy350 1 year ago
did you just say 3700 pound truck? Factory numbers on mine is near 9k. Any how what did those seats come out of?
pcfd20 1 year ago
Thats a clean sick truck!! How was the exhaust ran?
Mr88Chevy350 1 year ago
That things got balls
MrZappy101 1 year ago
u can hear that msd kick in limiting the revs at 2:53
350BLAZE 1 year ago
carburetor or throttle body?
panchito713 1 year ago
This truck is beautiful, id say its more than 400hp
infamousnova 1 year ago
hahahahahaha that wasnt a burnout, the only good thing about that video was the 383 engine
GriffyWiffyss 1 year ago
nice job man...thanks
lablue350 1 year ago
Nice truck.. 1/4 mile time?
garrett00fan 1 year ago
shes beautiful
subway003 1 year ago
Ur truck is badass man, Nice work:)
kolp09 1 year ago
man that was sick !!!! beautiful truck !!!!
bravo7120 1 year ago
gorgeous
TWill16 1 year ago
wow....drop tha hammer....really nice....and most specKs are found in your summit catalog that you left on your bathroom floor....Jegs...
twobazzar 1 year ago
god i hate lowered trucks...
jigafer1993 1 year ago
Nice truck.. what size of cam do u have? im building a 383 for my 90 silverado and i have the 700r4...any 1/4 time.. awsome video
9009MHHP 1 year ago
That's impressive.
Kglawl 1 year ago
awsome truck is it carb or tbi building 383 right now
tessareydobbs 1 year ago
Nice!
suave740il 1 year ago
good call on the sonys and why would he stop, the point wasn't to make smoke it was to show us his truck could snap em loose at 25 mph. Way Sicker!! Guy make some more videos
BadNews383 2 years ago
that m.f. is kickin it yo .. a dead stop shot would ve been better ..
rten39 2 years ago
Sick truck man I like it
ponchopwr70 2 years ago
nice truck... get rid of the walmart sony subs
dakotafarmboy90 2 years ago
NOW THATS A RIDE!!!!
CADILLACWOO 2 years ago
are those 22 in rims, and what is the name of them? badass truck.
bessinger09 2 years ago
fuking nuts bro
hypes14 2 years ago
damn bro you have a badass truck i love it
bolasdemaderaful 2 years ago
identicle to my dads 383 right down to the valve covers lol only ours is supercharged
6van6city6dgk 2 years ago
just hearing that baby Idle sends chills down my back
Z06maro 2 years ago
damm..that thing moves... what sizes of cam and the tranny u have.. nice truck
9009MHHP 2 years ago
Its a focondreams kakratoo oy slim .,
luizfelipe363 2 years ago
what did you do for mufflers and tail pipes on that monster?
BadNews383 2 years ago
That thing is nasty!! I love hearin the MSD box bangin rev limiter, Guy I thought you were gonna lose it when you hit second. Nice Rig!!
BadNews383 2 years ago
Do you use pump gas with that motor?
sunandfun09 2 years ago
@sunandfun09 YES,THE MOTOR IS 9-5-1 COMPRESSION.
92gmc383 2 years ago
man i love your truck
93carlosc 2 years ago
Nice truck, i got an 89 bagged with a sbc check it out
8urcash 2 years ago
@8urcash NOW THATS A NICE TRUCK.LOVE THE TWO TONE PAINT JOB.HOW DOES A PERSON GET RID OF FRONT WHEEL AND TIRE TOE-IN.
92gmc383 2 years ago
@92gmc383 whats 2 tone?
seifs4 1 year ago
*****Rolling burnout at 2:50*****
ika6667 2 years ago
think i'm in love now.....n_n!!!!
aldomanbox 2 years ago
How do you paint the mirrors? can you take off the mirror glass to paint the edges good or mask it?
weewoodeal 2 years ago
Sweet truck sounds about like my 96 Ram. Love the stance though yours looks as good as it sounds!
RamThisDTO 2 years ago
Done well not to loose it in that power skid.
NimrodAUS 2 years ago
nice truck. i got one that i hope to be doin some work to soon. its a 89 with a 305 tbi. ima put on some 350 heads and a fat cam. just a mild streed beast.
tommyakatmo 2 years ago
nice truck
like the speakerbox
streetracerjohn13 2 years ago
i love the way he talks =D
ganee6a 2 years ago 4
the rearend is to light my truck does the same thing with a stock 350/190hp
28z 2 years ago
Hey i dont care wat da ppl say below me i luv da truck all da around not only its a show truck he drives it n put his foot in 2 it show wat dat motor can do
WAYNE8458 2 years ago
everything is clean except for the gay ass sony EXPLODES!
jacisneros86 2 years ago 2
This comment has received too many negative votes show
nice engine,gay truck
Mississippi1313 2 years ago
Are you running chambered mufflers (flowmasters)? What size pipes?
xlelanolx 2 years ago
Nice truck man!!!!! One question. where did u get those seats from??????
LFGV89 2 years ago
sounds good! nice work!
chevyweld 2 years ago
dude next time don use so much tyre shine
madmaximus85 2 years ago
that is fuckin sexy
tcknapp1984 2 years ago 6
@tcknapp1984 how is that sexy? other than the sexy engine, its gay as shit.
klavistata 1 year ago
beautiful truck
bradoe2003 2 years ago
I should be droppibng a 383 CId vortec stroker what all do u advise me to do... like rebuild or replace... I know my tranny will need rebuilt but rear end? plus man thats a nice truck love the paint and how u dressed the engine
xixamxforgottenx 2 years ago
THe nicest truck on youtube in my opinion !!! is it victory red. i want this color on my truck.
theonlytj 2 years ago
thats was sick
chevyss88 2 years ago
wow I like the fact my truck can stay in control..call me crazy.
tokenchoke311 2 years ago
are you retarded?
he's trying to do that.if he wanted to he could keep it in control.
underarmour80 2 years ago
I was being sarcastic cause I know my trucks slow...it's pretty obvious he just stomped it
tokenchoke311 2 years ago
got grunt
cummins60 2 years ago
cmc
checo515 2 years ago
damn i wish i could have one of these trucks right here in sydney australia!!...very nice truck mate!!
8gunnerz 2 years ago
Nice powerskid dude
simodawg 2 years ago
yeah its got some power
Mrchevyman208 2 years ago
whats cool as shit dude
slayerdearly 2 years ago
hi mate could you tell me your cam specks please?.
peatergriffin 2 years ago
THE CAM SPECKS ARE ON PAGE 9
92gmc383 2 years ago
i have a 4.3 1989 silverado, if i wanna hoock it up with impala's LT1 engine, shud i change the tranny? or just do the housing ?
ganee6a 2 years ago
that is considered a burnout...
freddiboi702 2 years ago
thats an amazing ride, i love the paint job, the front end, the rear end, the interior, the center console, i love ur engine, 383 Stroker, thats a Wild Engine which give around 400 HP, and u got a nice wheels, dude, when u get a 383 stroker, u shud change the fuel cell? or its optional? or u can just change the fuel pump?
ganee6a 2 years ago
naw man changin the motor in anything doesnt mean u need to change ur fuel tank... they mostly do that for lighter weight... or in this trucks case looks...
2004ls1gto 2 years ago
how is that not a burnout?
drkhntr00 2 years ago
That's a nice truck! What has been done to the front end? Are those original buckets seats?
lololoeffler 2 years ago
It's a 92 GMC with a 94 GMC front clip and a 30 bar billit grill.The seats are not stock they are c5 buckets for full size trucks.
92gmc383 2 years ago
Truck sounds good with flowmasters. But the hick, slack jawed yokle is what makes me laugh. I had to fast forward video till end. Guys a lil' slow.
2xchrome 2 years ago
im sure its more than 400hp. We have a 383 and its getting about 500+
mhsbradl3y 2 years ago
thats not burnout im sorry to be the one to have to tell you but thats a nice truck but no burnout
kickuparse 2 years ago
im sorry to haveto tell you this but have you ever seen a ROLLING burnout? just because the vehicle is not sitting still and burning rubber doesnt mean its not a burnout
100000014 2 years ago
nice truck!! but seriously walmart subs!!??? hahaha
spermyzskeet 2 years ago
that is what i like to call american muscle..
dk4life164 2 years ago
This comment has received too many negative votes show
it's a '92. NOT AMERICAN MUSCLE. it is a tight truck though.
American Muscle is '60 to '70's
Abran7manX 2 years ago
i was talkin about the motor but whatever
dk4life164 2 years ago
hell yeah!
dropeddime89 2 years ago
es la camioneta de mis sueños, ojala puedas subir mas videos
pisterzzz 2 years ago
that bad boy is lite in the ass, so cool
lancelo96 2 years ago
I love this truck ! I want to build something like it. I got a 500hp, 500 torque 383 built by Rebello Racing, cost 10k that I,m looking for a truck to put it in
KARTRACR61 2 years ago
that is a bad azz truck!!!
randomguyfromtexas 2 years ago
B A D A S S !
bigsheist 2 years ago
350 block, stroked internals.
jizzo2009 2 years ago