G&P WOC GBB M4a1

[cymadeagle]

damn what did you put in there to get it to kick like that?

[bennyboy51599]

Are you using the stock aluminum bolt or a steel bolt?

[0mgwtfbbq21]

i getting the g&p M4 GBB RAS i think its called, is that a good gun?

[RedDragonQ]

Does the gas get expelled from the magazine after you lock & load it?, I heard there were a few problems with this G&P's magazines expelling gas after it's locked in, Does that really happen?

[Darkhomo]

which gas??

[NoRiX87]

Nice Power Rangers ;p

[kinmanyuen]

mine has no wobble at all. i needed a hammer to get the pin out

[airbornghost123]

this gun is tight im getting it but the mre version but does it have the bolt catch system too?

[PsalmLove]

you've got it the wrong way around mate.

the g&p woc is a wa platform with g&p upgrades.

[Heheh274]

@PsalmLove WA M4A1 Metal Body (Matte Finish). WA M4 RAS Front Set. WA M4A1 Steel Outer Barrel. WA M4A1 Spare 50rds Magazine. WA M16A2 Grip (Black). WA M4A1 6 Position Sliding Buttstock (Black). WA Hammer Set. WA M4 Trigger Guard. WA M4 Steel Stock Ring. WA M4 Steel Sear. WA M4 Bearing Hammer Pin Set. WA Steel Bolt Stop WA SPR Type Cocking Handle. WA M4 Hammer Lock. WA Steel Magazine Catch. WA Steel Selector. WA Steel Forward Assist. WA M4 Aluminum Buffer. Seems like WA to me.

[HawaiianShooter]

you should get a G&P Front Lock Pin it stops the wobble

[driftinsti]

is that a real 557?

[SSJSasuke777]

Hey Guys How Can you Fix The Wobble Betwween the Upper receiver and lower Because I Hope to get one of these in the future

[driftinsti]

get a ra-tech magic pin!

[SSJSasuke777]

What is that like a Bolt

[driftinsti]

nope. it replaces the front pin located at the front of the receiver. You can tighten the screw on it to stop the receivers from wobbling.

[AssaultRiflePlayer]

the gnp defender gbb doesnt wobble at all. you should have gottne that one instead

[MajorLeagueHacker]

would you recommend this over the other gbbr's like WE, WA, and KJW?

[Spartan452]

Of course. This is essentially an upgraded WA. WE is good too.

[gandhicakes]

I'd actually recommend the WOC. The WE will still need a few upgrade parts and tinkering while this one is an improved version of a tried and tested WA. All will require an RA Tech NPAS bolt to be gameable though.

[TheR3CK]

Dude, not all. My G&P Defender WOC is still stock and it helped me and my teammates in games. Not all Airsoft rifles ( AEGs and GBBs ) require immediate upgrade.

[gandhicakes]

Are you using duster or propane? With propane you're gonna need to down tune it to acceptable levels. At least in Canada it's 350-400 FPS. I never said all airsoft rifles need upgrades, we're talking about GBBRs.

[TheR3CK]

Dude, I use green gas. I'm just saying it cause it's money. He could use it somewhere better than those upgrades that you recommend

[gandhicakes]

What are your FPS limits? To actually play in a game with that you're gonna have to either use duster, which limits reliability or down-tune it. That's my point, it's not a cosmetic upgrade it's a functionality issue.

[TheR3CK]

Since I play in the Philippines, the fps cannot go an higher than 500 fps. Not bragging cause it hurts like fuck.

[gandhicakes]

Oh well that's fine and you're right. Most of North America though has between 350-400 usually, some exceptions but that means we'd have to get the tunable valve or a whole new bolt to use them in games.

[SSJSasuke777]

Yeah Thats My Concern When Say I wanna Go To a Big Event like Irene or just have it being adaptible to different fields you know Now would it be as Easy to change out the bolt out or would you have to take that apart as well

[gandhicakes]

That is the ONLY reason I'm debating a Systema instead, the quick change cylinder plus no hassle mags Vs. realism and something WAYYY cooler...

[SSJSasuke777]

Well It Cant be that bad but Really If you want realism youd go with one of these and fuck field restrictions you should be able to hit people from 500 feet away without sacrifice of velocity. I mean hell actual Simunition ( Paintball bullets ) Go Way Faster than that

[TheJedi270]

@MajorLeagueHacker Hell no WE is way better than the others better internals and zero wobble. WE is a new system they dont do cloning.

[ARX7ARBALESTZ7]

for the wobble get a RA Tech magic pin, it stops the wobble

[gandhicakes]

Apparently that mashes up the pin hole though.

[ARX7ARBALESTZ7]

it does? awwh that sucks. never mind then lol would be be better for a full metal body then?

[gandhicakes]

I dunno really. That was a few guys reports from AirsoftCanada. I'd suggest just shimming the receiver, but since you're from the US I'm guessing, I'd just buy the Prime receiver set and be done with it...then again I'm the type that spends retarded amounts on small fixes...

[ARX7ARBALESTZ7]

well, your still better than me. i use weird things to fix stuff haha. and yeah, i'm in the u.s. so i'll check out the reciever

[gandhicakes]

The Prime one is kind of the Ferrari of fixes...I'm sure in the US you can find cheaper solutions. Being from Canada and having a mark-up of 200-300% I usually just end up buying the better one as they're already stupidly expensive. Apperantly Prime, G&P will work on the WE as well so if you want the cheaper AWSS then just get the RA Tech BCG and a new receiver. Total cost of all that in Canada = ~$1700...and that doesn't include the receiver.

[ARX7ARBALESTZ7]

yeah, i should be able to find them cheaper. $1700!? that's ridiculous!!! why is Canada so tough on airsoft?

[gandhicakes]

It's because of the laws regarding importation of "replica firearms" and actual pellet guns. Because of Canadian law, airsoft falls into both categories so it's illegal to import without a Business Firearms License and even then you're most likely abusing it by selling said airsoft guns. The sport is alive and well in Canada, just the high starting price filters out all but the serious.

[ARX7ARBALESTZ7]

awwh that sucks. that's stupid though, airsoft is it's own category. cept for the replica firearm i can understand that. but the pellet part is totally incorrect

[goldeneye007662]

Hey, saw you on GGi. RWS bought this didnt he?

[Spartan452]

nope, this was the standard colt bodied M4, RWS bought my SR15. Disappointed by what happened to it though =(

[airsoftcaverly]

dang man u got alot of money cause i see an eotech 556 or 557 holosight on it nice

[Spartan452]

Its a 557, got it for my real AR15, good sight but kinda heavy.

[luverboy30]

are G&p aegs good? i wanna get a M16A1

[Spartan452]

G&P aegs are one of the best out there, but this isn't an aeg

[AznPretzel]

how much did it cost and where are the G&P guns made in?

[UBCSWraith]

They cost around $700 in the U.S.

[41ACE]

no! they were not made in us. they r from Taiwan.

[kurikobun]

They are made in Hong Kong.

[patrikk777]

How stupid can you get? He meant that they cost 700$ when bought in U.S... Jeesh.. -.-

[41ACE]

haha u comment the wrong one buddy, im made a correction to the kurikobun guy. lol

[41ACE]

gp body wobbles, thats y i got the prime. such perfect metal body.

[AndY3607]

except for the fact that prime bodies are like $500

[41ACE]

true, lol and i got it. it is a work of art man. nothing can compare.

[AndY3607]

Im saving money to get it, I cant wait!

[41ACE]

man you r going to love it, but expected to be much lighter than the GP body, due to the fact that is 100% pure aluminum. not alloy crap. redwolf is a best place to shop for it. oh one thing the stock ring will not fit, so u have to sand it down.

[AndY3607]

ya thats where I was going to get it off of, thanks alot man!

[bAIRSOFTGUYd]

really nice,do u recomend a red dot scope? and if u do,wich one? i'm gonna buy one i think,but i am not sure if it is worth it

[hicubecars]

theres a way to fix that wobble! its called a foam ear plug or an erase that fits ==", put that/those in under your rear receiver pin.

[brandonwithbbs]

hay nice gun, oh by the way can you make a review on it?

[bowelrock]

POS spend more on the gun next time and less on the optic

[guajiromotherfcker]

Nice piece where did you get it? how much? any info on preformance FPS?IS IT FULL METAL ?

[RyanPolak]

Full metal with CNC finishing, about 500 $, most of them are in RedWolf, it fires about 380 fps on top gas.

[szpiderman]

Nice! 5/5

[Szarakdorsz]

Only one thing to say: "SWEEEET!"

[AdioUKO]

Does the handguard wobbles either? Like those from G&G...

And do you know if the internals comes upgraded? Not the same pieces from the regular WA M4.

[digbj]

Nice gun !!

I wanna buy !!

May you make a review of this G&B WOC M4 pls ? :)

would be very nice !!

[Spartan452]

I will when I get better, stupid flu is killing me.

[superfineowl]

can u make a review? plawkz?

[kakodshoon]

hey im just wondering how much is it worth and does it run off gas or batteries?

[kullwarrior]

obv gas since batteries cannot make so much recoil

[nyenthusiast]

That reciever wobble is probably due to recoil. It happens on real steal M4's from time to time. Can be fixed with the addition of some better quality body pins.

[liorkikus]

cool!!!!!!!! looks kick ass!

[p8ntbolover007]

hey nice little video, when you say it wobbles a lot is that just the handguard or the two halves of the receiver as well? a bit hard to tell. Thanks

[Spartan452]

wobble between upper and lower reciever

[Mirska1]

Try a accuwedge to remove the wobble, used on RS reveivers for that problem.