USB SPI Install Guide part1

[raylyd]

use a soldering iron to remove that rt63.

[zombiedestroyer749]

dude my usb spi wont show up on my computer when i plug it in

[garretts228]

@Ahquatic Yes I know, but you pust 3x 330ohm resistors. I thought you only need 2xswitching diodes and 1 jumper.

[garretts228]

I though you only need 2 switching diodes for the jtag connections?

[XISOMODSX]

this is a noob question but what does the usb at the end of second tutorial plug into?

[ChrisDavies1001]

what xbox do you have because those holes are not on mine

[TubGaming]

whats a jtag?

[iphoneandcod]

what does this do

[djecho800]

what does soldering flux do exatly?

[FaDeaWaYNaTi0n]

u solder wrong

[jrcfoxtrot13]

you can jtag just with this?

[DJR44100]

question?

Are you suppose to jummp the third resister or install three like he did.

I looked at a lot of tuts and they always jump the third one. Or can it be done this way without messing anything up.

[rzrraceing]

And What Wire Did u Use?

[rzrraceing]

u dont have to remove the R6T2 for the fact that when u update the FreeBOOT u have to update to add avatars but very good tutorial

[KoolieoDude13]

@rzrraceing removing that resistor lets you update but then being able to downgrade if needed for reinstalling homebrew. That resistor is the connection to blow a e-fuse, if the ones that the update blows blows, you can no longer jtag you xbox.

[Grim1873]

@rzrraceing the avatar update wont try to blow a efuse, but i always remove r6t3 on the consoles i jtag (because i want them to stay that way).

[IIFRoZeNxX]

Soo this basically replaces the lpt port?? correct? because my computer doesnt have one...

[Grim1873]

@IIFRoZeNxX yes and its faster then lpt.

[IIFRoZeNxX]

So does the USB SPI replace the LPT???

[Grim1873]

@IIFRoZeNxX yes, it only takes 6mins to dump 16mb.

[alex6316]

can you get a guy to install it for u

[SoFroStyx]

hey can u make another usb spi and ill buy from u

[mechgamer123]

what's the point of rosin flux?

[Grim1873]

@mechgamer123 it allows the solder to stick to metal.

[FireworksGenius15]

@mechgamer123 You have NOOOOOO idea how difficult it is to get the solder to stay where you want it without that miracle in a tub. :)

[mechgamer123]

@FireworksGenius15 yeah ive figured that out when i jtagged mine... lol

[TheThevideogamefreak]

once i burnt my self with a solder let me tell you it freaking burnt!!!!!!

[DayLight95]

@TheThevideogamefreak it don't hurt you baby

[TizHancock]

@aH0tUnicorn, hey just realised that im subscribed to you =D

[ravihpa]

Hi,

Great video. You know you've mentioned everything else except the "USB board" itself. What is it called ? What should I ask for if I am at an electronics store ? We don't have RadioShack where I live :(

[ButtMuffin193]

@ravihpa just seavh up usb jtag on google and youll find them for sale for like 30 bucks

[Grim1873]

@ravihpa your not gonna find anything like it in a store, i build 100 of them but i dont have any left, check on ebay for a usb spi.

[Ciano56]

Were can i get the usb spi itself? And after you install it i asume you use the samer commands in nandpro excpet changeing L(lpt) to u (usb) and it works in the same way only alot faster and more accurate.. am i correct?

[rockpizzle]

u can make a spi flasher just as easy as buying one,the pcb and parts are dirt cheap!!!

awesome vid,this is for sure the best vid online anywhere!!!!clear video,neat job and very relaxed procedure!!!!

[peacemakerryan]

Me too where can I find it?

[sid4975]

could you tell me where to get the usb/spi thing? i can seem to find it