At 2:54 he even starts all over again and starts to rub the backside.
HAHAHAHAHA
How foolish do you have to be to get SUCH an idea?! Even if it was just for the laugh/joke this video is really damn weird.
He is like ultra serious and picky with what he's doing. Like it's really been dirty. And even IF you had to wash it. Would you have to film it?? LOL Priceless xD
He uses Vaseline to protect components on his motherboard because he does extreme over-clocking using liquid nitrogen. (sub zero temperatures) The only effective way to get rid of the residue is using soap and water. He removed the CMOS battery out when washing the motherboard, and has clearly stated that it still works.
*facepalm* He overclocks using a liquid nitrogen cooler (sub zero temps) and therefore uses vaseline to protect other components on the motherboard. Insulation if you like. Vaseline is very hard to remove, and the only proper solution is to use soap and water.
*facepalm* He overclocks using a liquid nitrogen cooler (sub zero temps) and therefore uses vaseline to protect other components on the motherboard. Insulation if you like. Vaseline is very hard to remove, and the only proper solution is to use soap and water.
*facepalm* He overclocks using a liquid nitrogen cooler (sub zero temps) and therefore uses vaseline to protect other components on the motherboard. Insulation if you like. Vaseline is very hard to remove, and the only proper solution is to use soap and water.
yes the board still working, and no im not an idiot, the board is just only used for overclocking, so i use vaseline for protection the board,and that i wash of some time
yes the boars still working, and no im not an idiot, the board is just only used for overclocking, so i use vaseline for protection the board,and that i wash of some time
I am surprised the board even still works. Water could have gotten under the caps or just about anywhere else water SHOULD NOT BE. All I am going to say is your a fucking idiot.
He uses Vaseline to protect components on his motherboard because he does extreme over-clocking using liquid nitrogen. (sub zero temperatures) The only effective way to get rid of the residue is using soap and water. He removed the CMOS battery out when washing the motherboard, and has clearly stated that it still works.
@kodoku7otaku Really? Just because of a simple little mistype you gotta go and trash some one. Good going bro. Good going. Next time I wipe my ass I will think of you. Now go fuck yourself and make yourself SOMEWHAT useful to rest of society.
He uses Vaseline to protect components on his motherboard because he does extreme over-clocking using liquid nitrogen. (sub zero temperatures) The only effective way to get rid of the residue is using soap and water. He removed the CMOS battery out when washing the motherboard, and has clearly stated that it still works.
He uses Vaseline to protect components on his motherboard because he does extreme over-clocking using liquid nitrogen. (sub zero temperatures) The only effective way to get rid of the residue is using soap and water. He removed the CMOS battery out when washing the motherboard, and has clearly stated that it still works.
At work I came from my coffe break and bought a coke, I but it on my table and it fell top first on the floor EXPLODING :D I mean it took flight! Next thing I see my PC has a black screen :D I allways left my case under the desk open and it was filled with coke haha, I turned all off, took everything apart and then ran to the bathroom, washed the coke away and RMA-d it with a note "Dont know what happened, dosent turn on anymore". :-D
He uses Vaseline to protect components on his motherboard because he does extreme over-clocking using liquid nitrogen. (sub zero temperatures) The only effective way to get rid of the residue is using soap and water. He removed the CMOS battery out when washing the motherboard, and has clearly stated that it still works.
no rma yet, the board works very nice, an yes it to get all the vaseline out af the board, so i can paint it, just testing for cold bug, and there was none :)
**take out the battery before attempting to recreate this video**
SomeGuy3333 1 day ago
Where the fuck is the socket
TheRoflWofl 2 months ago
Meanwile in Afrika.
ulli0402 3 months ago
I hope you at least will consider removing the battery.
zSonata 6 months ago
@zSonata
Yes. He removed the CMOS battery. He aint dumb like you. :/
kodoku7otaku 3 months ago
@kodoku7otaku Well.. He didn't remove the CMOS battery.. so I hope you feel like a retard.
zSonata 3 months ago
@zSonata
Y U SO DUMB?
kodoku7otaku 3 months ago
@kodoku7otaku u dumb
zSonata 3 months ago
@zSonata
NO U DUMB
kodoku7otaku 3 months ago
@kodoku7otaku yur both dumb :S
kanbeiZ 2 months ago
@kanbeiZ
xD paha
*your
I just did that for the lulz to see how far he would keep it up for.
Hope you have a Happy New Year!! :3
kodoku7otaku 1 month ago
@kodoku7otaku xD i see, hope you had a nice new years eve :D
kanbeiZ 1 month ago
I'M PISSING MYSELF. LMAO
At 2:54 he even starts all over again and starts to rub the backside.
HAHAHAHAHA
How foolish do you have to be to get SUCH an idea?! Even if it was just for the laugh/joke this video is really damn weird.
He is like ultra serious and picky with what he's doing. Like it's really been dirty. And even IF you had to wash it. Would you have to film it?? LOL Priceless xD
REDxFROG 7 months ago
@REDxFROG
You're a retard. Fucking dumbass POS.
He uses Vaseline to protect components on his motherboard because he does extreme over-clocking using liquid nitrogen. (sub zero temperatures) The only effective way to get rid of the residue is using soap and water. He removed the CMOS battery out when washing the motherboard, and has clearly stated that it still works.
Not a problem if you get all the water out.
kodoku7otaku 3 months ago
so THAT's how you clean a mobo.
venichen1 8 months ago
WHAT The F!?
tuberoako777 8 months ago
This has been flagged as spam show
@tuberoako777
*facepalm* He overclocks using a liquid nitrogen cooler (sub zero temps) and therefore uses vaseline to protect other components on the motherboard. Insulation if you like. Vaseline is very hard to remove, and the only proper solution is to use soap and water.
kodoku7otaku 3 months ago
too serious
myrandomspaces 8 months ago
What is the purpose of this? The board couldn't have been that dirty.
JAF5537 8 months ago
@JAF5537
*facepalm* He overclocks using a liquid nitrogen cooler (sub zero temps) and therefore uses vaseline to protect other components on the motherboard. Insulation if you like. Vaseline is very hard to remove, and the only proper solution is to use soap and water.
kodoku7otaku 3 months ago
How do you remove and replace the socket?
BerriesMcGOO 11 months ago
remove the bios battery
happycanada2003 11 months ago
I bet any board will work again after a wash, just has be completely DRY.
mikeccuk2006 1 year ago
Sir why are you washing your UD9?
roflschofel 1 year ago
This has been flagged as spam show
@roflschofel
*facepalm* He overclocks using a liquid nitrogen cooler (sub zero temps) and therefore uses vaseline to protect other components on the motherboard. Insulation if you like. Vaseline is very hard to remove, and the only proper solution is to use soap and water.
kodoku7otaku 3 months ago
enjoy ur solder flux residue and various gunk on your dishes
b00rk 1 year ago
This is hilarious. A bit risky but if left to dry should work perfectly; there is no steel/iron parts that will rust.
What is that covering the CPU socket?
d1scla1mer 1 year ago
lets see ya brush those 1366 pins clean lol
drEmulatorMadmax 1 year ago
did any of the ports or anything rust?
TheAngryBoss 1 year ago
yes the board still working, and no im not an idiot, the board is just only used for overclocking, so i use vaseline for protection the board,and that i wash of some time
MrRosty1975 1 year ago
yes the boars still working, and no im not an idiot, the board is just only used for overclocking, so i use vaseline for protection the board,and that i wash of some time
MrRosty1975 1 year ago
I am surprised the board even still works. Water could have gotten under the caps or just about anywhere else water SHOULD NOT BE. All I am going to say is your a fucking idiot.
LordOmniDesOmega 1 year ago
This has been flagged as spam show
@LordOmniDesOmega
You're a retard. Fucking dumbass POS.
He uses Vaseline to protect components on his motherboard because he does extreme over-clocking using liquid nitrogen. (sub zero temperatures) The only effective way to get rid of the residue is using soap and water. He removed the CMOS battery out when washing the motherboard, and has clearly stated that it still works.
Not a problem if you get all the water out.
kodoku7otaku 3 months ago
@LordOmniDesOmega
Oh...and yeah. Learn your grammar. Come back to me and tell me the difference between "your" and "you're" you fag.
kodoku7otaku 3 months ago
@kodoku7otaku Really? Just because of a simple little mistype you gotta go and trash some one. Good going bro. Good going. Next time I wipe my ass I will think of you. Now go fuck yourself and make yourself SOMEWHAT useful to rest of society.
LordOmniDesOmega 2 months ago
@LordOmniDesOmega lol..
MrRosty1975 1 day ago
test the board if still works hahhaha lol. .
deathdexter999 1 year ago
That's the durability of Gigabyte for ya.
Kvjavs 1 year ago
Ничего себе!!! Охренеть!!! Смелый )))))
BOSS12345678901 1 year ago
joder y encima una UD9
VIRIATO1995 1 year ago
Do you feed it?
FluffyLlamaGaming 1 year ago
O.o
AndressAndress1 1 year ago
can i wash my MA785GT-UD3H like this?
lol
388945a0 1 year ago
There is no way that washing didnt cause any rust... You might discover soon...
Fuckingenius 1 year ago
@Fuckingenius there arnet and steel parts >.>
driftingnfsc 1 year ago
@driftingnfsc omg... -.- no comment...
Fuckingenius 1 year ago
@Fuckingenius LOL XD u just commented o;
driftingnfsc 1 year ago
No brain, no pain ...
milosinside 1 year ago
This has been flagged as spam show
@milosinside
He uses Vaseline to protect components on his motherboard because he does extreme over-clocking using liquid nitrogen. (sub zero temperatures) The only effective way to get rid of the residue is using soap and water. He removed the CMOS battery out when washing the motherboard, and has clearly stated that it still works.
Not a problem if you get all the water out.
kodoku7otaku 3 months ago
LMAO does that still work hahahaha?
woollster00 1 year ago
watercooling XD
260VUS 1 year ago
what ?
yunkeacme 1 year ago
How are you going to solve the rust problem?
RofIStomper 1 year ago
This has been flagged as spam show
OMG, I don't believe my eyes.
takealready 1 year ago
Where is your antistatic guard :0
llVllahi 1 year ago
i put the board in the oven on 70 degress, then just put on a table for 24 hours then its ready to lounch hehe
MrRosty1975 1 year ago
How long did you drying it before turn on? and how, hairdryer or just leave in ventilated place?
3D8n52DmV37EI6oHeX 1 year ago
you missed a spot :D
yaxo111 1 year ago
Nice Board !! :-)
TAISA930 1 year ago
Comment removed
TAISA930 1 year ago
this video hurt to watch :/
ShaquoIT 1 year ago
This has been flagged as spam show
@ShaquoIT
He uses Vaseline to protect components on his motherboard because he does extreme over-clocking using liquid nitrogen. (sub zero temperatures) The only effective way to get rid of the residue is using soap and water. He removed the CMOS battery out when washing the motherboard, and has clearly stated that it still works.
Not a problem if you get all the water out.
kodoku7otaku 3 months ago
Vaseline is god-tier lube.
Water based lube is for casual fags.
Doazic 1 year ago
@Doazic Does that mean you're a hardcore fag?
bobalazs 1 year ago
@bobalazs u mad?
Doazic 1 year ago
@Doazic >Implying anyone was mad, apart from yourself.
Orcworm 1 year ago
sexy sink you got there
fli754 1 year ago
This has been flagged as spam show
I just flagged this video for violent and repulsive content. You should do the same.
Solidstate89 1 year ago
HAHAHAH, you are priceless man :D!!!
This reminds me a bit!
At work I came from my coffe break and bought a coke, I but it on my table and it fell top first on the floor EXPLODING :D I mean it took flight! Next thing I see my PC has a black screen :D I allways left my case under the desk open and it was filled with coke haha, I turned all off, took everything apart and then ran to the bathroom, washed the coke away and RMA-d it with a note "Dont know what happened, dosent turn on anymore". :-D
HousedanceTanL 1 year ago
DON'T TRY THIS WITH YOUR MOBO
rosajose3388 1 year ago
This has been flagged as spam show
@rosajose3388
You're a retard. Fucking dumbass POS.
He uses Vaseline to protect components on his motherboard because he does extreme over-clocking using liquid nitrogen. (sub zero temperatures) The only effective way to get rid of the residue is using soap and water. He removed the CMOS battery out when washing the motherboard, and has clearly stated that it still works.
Not a problem if you get all the water out.
kodoku7otaku 3 months ago
good way to clean your mobo
gamakigi 1 year ago
It is the weirdest video I've seen in a long time.
How is it that the board has no socket?
It's very strange :D
HzNehalem 1 year ago
@HzNehalem it has a socket, it's just mostly covered up and ready for a liquid nitrogen pot ;)
Skierkid450 1 year ago
0:44 LOL
mladknez 1 year ago
no rma yet, the board works very nice, an yes it to get all the vaseline out af the board, so i can paint it, just testing for cold bug, and there was none :)
MrRosty1975 1 year ago
@MrRosty1975
Are you painting it with dielectric paste? So what'll you do in case RMA? Tear the paste too?
politech93 1 year ago
And then Dino what's going on here? - Neo
velaphinosdumo 1 year ago
Pouring hot water has to wash out the vaseline?
politech93 1 year ago
Did you RMa it?:D
kendu10 1 year ago
Sødt.. ;)
xt0m 1 year ago
hehe thank you Dino ;)
MrRosty1975 1 year ago
Husk at fjerne batteriet ;-P den lille metal fjeder under, den har det med at korridere
DK12k 1 year ago
hahahah nice one
dinos22 1 year ago