(VIDEO #6) How Mylow Replicated Howard Johnson's Magnet (p2) Motor

[orgoniteRocks]

That is an amazing proof of concept. Have you considered using an electromagnet to control the speed?

[brainndamage]

"Here we go" ... and he spins it up with his other hand. I wonder why he doesn't film the whole thing from a tripod.

[PurePower025]

Perendev magnetic motor WORKS!!!

its the magnet shielding and angling that makes it work.

[2261961]

Your speed problem: The gaps between the rotor magnet colloms is too small, they drain each other in the rotation and that limmits it. make it smaller with more magnets and will reduce speed, bigger with less magnets and higher speed but not so smooth

[ballastastronaut]

he says at the start of the clip "i remagnetised the magent". there you go. the magnets wear out. stop spitting venom at this guy. this thing works but the magnets wear out. thats where the engergy comes from but they need to be remagnetised. stop being so bitter just because you couldnt get it to work/thought of it first. and the guy who set up this channel just out of spite for mylow. your pathetic

[LRCan1]

to say that, have you follow the forum at overunity com ?

LightRider

[Aquar1uZ]

You can sputter all the venom you want, the device in this viodeo is shown NOT to be driven by hand, even the debunkers in OU are seeing that. Next they say there MUST be a fishline in this video, but there is neither. There are now three people in two countries replicating this to exact specifications (including myself) and do not worry, if it does fail as you say I will be glad to state that right here too and on OU.

[Drevtoobe]

Looking forward to seeing you state that all three "Stonehenge" replications are a total failure. Then will you believe?

[Aquar1uZ]

If the materials are exact, why sure. And I will publish the full results either way.

What makes you think I would not?

[Drevtoobe]

Some people are stating that there is a fishing line in this clip also. That is indeed possible. Again, try to use your common sense. The camera shot is always tight, and either Mylow's wife or brother was off camera lining up the fishing line. There could be one or ten people out of the camera shot. WAKE UP.

[Aquar1uZ]

It is you who is grasping at straws trying to scream fake all over the place. Are you not afraid that this will backfire and attract the interest of other legitimate individuals

[Drevtoobe]

Listen bozo, you may be able to detect a string like this: Take the colour out of the image. Then do a pixel intensity histogram of the area to the left of the support where people think that they see a string. Then stretch the contrast of the image based on the histogram to exaggerate the contrast as much as possible. Try inverting the image. Try running a horizontal edge detection convolution filter. If the string is there and the compression is not too high you will likely find it.

[Aquar1uZ]

Great! Post your evidence for all the world to see then and we will all bow to the great Drevtoobe.

[Drevtoobe]

"Are you not afraid that this will backfire and attract the interest of other legitimate individuals"

Nobody is interested in this besides the 200-400 people that you see on the view-count for most of the clips. Wee are in a microscopic back alley of the Internet, there are no "other legitimate individuals", just our little fishbowl.

[Aquar1uZ]

Wee indeed.

[Drevtoobe]

"the device in this viodeo is shown NOT to be driven by hand"

Any sane rational person can clearly see that the disk can be spun up by hand because the camera shot is almost always zoomed in. What's wrong Aquar1uZ? Is your brain incapable of processing this visual information properly?

[Aquar1uZ]

You are forgetting the roatational analysis deon by LightRider, the owner of this channel.

I tend to believe him more than people shouting unfounded venom. But please keep it up, you are attracting attention.

[Drevtoobe]

"you are attracting attention"

Like I said, you can live in a world with your little paranoid fantasies about MIBs. You and Mylow would make a great pair. One compulsively lying about the MIB and you compulsively gobbling it all up like a National Enquirer reader. Did you now that psychics predicted that 1977 was going to be the year that a UFO landed on the White House lawn? (Or was it 1983?)

[Aquar1uZ]

My theroy was posted before Mylow or anyone else ever mentioned MiB. Maybe he read my post and used it as an out..

Good for him. Check the "Shiloh" angle. Google it.

[Drevtoobe]

Oh yeah! That giant Post-It note on your forehead that says "NUTCASE!!!", doesn't the glue start to irritate your skin after a while?

Mylow is the mystical inheritor of Howard Johnson's "Shiloh" spirit and came to save us from electrical bills, 2012, and will also teach us how they get the caramel in the Caramilk bar.

From Rasputin to Mylow to the dawn of the age of Aquariass. Mystic crystal revelations and the mind's true liberation... AquariASS.... AquariASS.

[Aquar1uZ]

There are no fishing lines!!! How much abuse do we have to take from the debunkers?

If there was fishline through the hole and attached to the shaft, how is this possible because he pickse the entire stator up to show the U shaped stator magnet???? Where is the line then?

I am starting to track anyone who despite the evidence persists that this video is a fake.

[Aquar1uZ]

YES I KNOW THE LAST PROJECT WAS FAKED WITH FISHLINE AND THAT IS WAS ON PURPOSE YOU MAGGOTS.

Read the GUMCT thread on OU it is EXACTLY as I state there. Reality sucks for some but Mylow started this completely on the level.

[Drevtoobe]

Will you please stop your totally ridiculous nonsense? In this early video the disk is being driven by HIS HAND on the the rotor shaft. Yes, there are no wires, it's being done with his hand. The camera shot is zoomed-in giving Jose ample time to start up the disk and keep it running with his hand. That's why you see different RPMs. It is so ridiculously obvious.

Mylow was a total fake from day one. You have to be a total kook to think that this clip is real.

[Drevtoobe]

Also, don't you even dare give me that crap that I am a paid debunker and that Mylow is a victim of the MIB and everything that you are seeing here is what "they" want you to see. How you can go through life thinking like that is beyond me. This whole thing was BS from day one and that's what I said from day one.

You CAN'T get energy from magnets. Magnets act like invisible springs and everyone knows that you can't get energy from a spring. Mylow is probably sick, and you are not far behind.

[Drevtoobe]

"I am starting to track anyone who despite the evidence persists that this video is a fake."

Will you just get over this nonsense and move on Aquar1uZ? What the hell do you mean that you are going to "track" people?

In my layman's terms, you are a person whose "brain does not process information properly". It's unbelievable that you can believe the ridiculous conspiracy fantasies that you post in the OU forum. "It's all a setup" to make you even crazier than you are.

[Aquar1uZ]

Congratulations, you just made the list.

[Drevtoobe]

"Congratulations, you just made the list. "

Take your meds you idiot.

[Aquar1uZ]

Are you stamping your little foot yet because you are not getting what you want Canada?

[LRCan1]

Indeed, the analysis of the graphs leads us to ask questions about the nature of the energy that accelerates the engine. Video analysis of all the first video (especially video 41b ... but also the video 6) shows all an acceleration curve seemingly chaotic ... far from what one might expect from such an engine.

LightRider

[Drevtoobe]

In this clip Jose drove the disk with his hand on the rotor shaft. Please see my other comments on this clip directed at Aquar1uz. His nonsense has to stop.

[newenergyforall]

You can see fishing lines on 3:56...

unfortunately this is fake too :(

[Aquar1uZ]

Ah, you mean the table right.

Where is the line when he zooms in on the shaft then? Where is the line when he picks the entire stator assembly up?

Please do explain newenergyFOR FEW

[Aquar1uZ]

EXACTLY!!!!!

The DUTCH ARE JOINING FORCES IN REPLICATING THIS SETUP.

You debunkers should be kicked all the way back to Maryland.

[LRCan1]

*** NEWS ***

Congressman's secretary had been able to confirm that an NSA visit did indeed take place with Mylow on Friday.

"We know all about you; we've been watching you; and we'll know if you don't do as we have told you."

All the story at : Pure Energy Systems News site !

[LRCan1]

Fake or not, this is only a backup of Mylow page... In case that his videos was removed for some reason...

[theoneagain]

This guy just been busted for putting all these videos of his motor on youtube!!!!

[LRCan1]

This is a BACKUP page from Mylow. To have an answer please post on is page. Thanks.

[strongmeasures]

actually that it stops when he pulls away the magnet and uses the wood as a brake shows that it is probably not hooked up to a battery.

[anandaadhar]

Congratulations!

[kayhearle]

keep up the good work ...

[LRCan1]

Future will tell...

...I wish someone succes to reproduce is motor.

This is a BackUp page... Update are available at Mylow page.

I'll try to keep this page Up to Date.

[variablestatus]

i wish this were true more than anyone but show the motor working at least for a 10 minute video of the model spinning without stopping and no one near the motor, and this would prove what you are saying is true... i have watched your these video's more than once and am finding a pattern of them not showing the model working for any length of time, even 5-10 minutes. i am reaching near zero point and do not claim a working model but i show a ten minute version with my magnetic motor #13