A set of four Amber flashing LED strip with flasher relay for turn signal

[jettastreetracer]

can someone help me out. im avoiding the birds nest of wires the prior owner left for me. im just going to run my own cuircuit for my turn signals. and running lights.

[2allbuyer]

please email me at ( komy63 at yahoo dot com dot hk ) for more discussion, i can send you a wiring diagram i made.

[jettastreetracer]

hey...is that a front and back led strip?!?!?!?!?! are you using one flasher?. i hate wires! someone told me i need 2 flashers. im also puting a fuse in that line but i need help....if these are led's do i really need the load equalizer to run these leds? or are you using your standerd battery

[2allbuyer]

each vehicle only need one blinker relay. if u already using a led blinker relay, no need to use load resistor unless u r using original relay. any battery will do, led lights use very little power.

[Johndeer4955]

Those are cool

[redgeracer23]

hi.. i have LED 12v on my bike F&R but i dont like the flash speed!!

i think i need the led reley like on this vid. but i dont know how to install..!

do i need to take of my old reley and change the one like in this vid?

and how u do the hasard? do you sell only the reley and hasard swith?

i want to get of that set but im here in japan i dont know how to use e-bay!!!

can u help me? pls. pls. and sorry for my bad english!!! tnx.......

[2allbuyer]

yes need to replace the old relay. the relay in the video does not has hazard function. what bike you have? your bike originally come with hazard switch? how many pins your bike relay has?

send me email and i will try to help you.

[redgeracer23]

tnx for the reply.. My bike is cbr250rr mc22 in front winker 12v LED w/o resistor and in the back winker is like in cbr600rr tail light (not original) like Sequential Signal Integrated LED Tail Lights. the back winker runing from center to L or R!! some times normal speed some times more speed!! and my batt. is new but allway drain if i dont use my bike for 1day! os i alway unplug the back wire from extenal(capasitor or resistor) to the winker. and i dont know how meny pins are my reley!

i

[2allbuyer]

sorry i don quite get your meaning about the back. do you mean you have modified to use a cbr600rr tail light unit with turn signal build-in? Are they (cbr600 tail light unit) LED lights too? if you have inconsistent flashing speed, there should be some problem with the system. Who did the mod? Yourself? Battery drain frequently mean something is using power even the key has turned off. The original blinker relay on your bike is 2 pins type.

[redgeracer23]

Honda CBR 600RR CBR1000RR Sequential Signal Integrated LED Tail Lights Smoked　pls look this vid at youtube this is my tail light

My mc22 carrera by Lee and this is my bike

tnx alot

[2allbuyer]

what do you mean the tail lights smoked? you mean they burnt? so not working now? I checked your videos and saw your bike, nice work. anyway, i cant leave any contact info here, seems like not allowed. so post a video on your youtube showing the problem, so I can have a look.

[redgeracer23]

tnx alot, i will send u a msg after i post a vid.

and i saw my original relay its 3pins type..

[2allbuyer]

OK, send me a message after u took the video. By the way, check the mark next to the pins of your relay too.

[HotOnYourTrail]

im looking at getting this, but im wondering how to install it? do i need to use the blinker relay that comes with it, or can i use the existing blinker wires that are already on my bike with the stock blinker relay? also, how do you control all 4 lights seperately with only 3 pins on the relay?

[2allbuyer]

The light strps just stick on anywhere you like with double-sided tape. Yeah you can use your existing blinker. Unless after installing the flashing speed is way off, then you need to use the provided blinker. The relay is just a flashing device, it requires your original signal switch to work.

[791]

where did you get these and how much

[2allbuyer]

i sell these on eBay under the same user name

[edmundlancelot]

hi..u said that this can be installed on motorbike.i am riding one and is it waterproof?does it have double sided tape?where to get it in malaysia

[2allbuyer]

Yes it is great for motorbike. It's waterproof and with double-sided tape. I sell this on eBay with the same ID: 2allbuyer and it has a set of 2 strips and a set of 4 strips.