Magnetic Gate

[dian2n]

Look at it from another perspective. If someone manages to get this thing to rotate continuously, this would mean that it manages to overcome friction. If he then reduce friction will start to accelerate. If again reduce friction, the acceleration will be even greater. Then ... where will it take that energy used for acceleration? Acceleration depends on what? The method? Faith?

[dian2n]

@dian2n Finally we get a machine with efficiency greater than one. Ie it only runs without input of energy, but even accumulate energy - creates energy. Do you feel which way things are going? It remains to occur and the fairies will make a big party:)

[kuuliolegit]

pirated game

[chrisofnottingham]

@smartpartzzkidd because it won't keep running. This set up is like a ball running down a quarter turn of a spiral path. After a full turn, you either have to get back up to the start (using up all the energy you gained) or keep rolling down forever.

[smartpartzzkidd]

Why not continue the pattern of magnets?

[challenger159]

As you say, the fact that it passed by the sticky spot is remarkable. To invent something new you better don't listen to the sceptics. It's them who said "there will never be airplanes, rockets etc."

At least with only a hand full of magnets you can find it out.

[executableapplet]

i like your way of thinking mate. he just presented VERY basic information, broken-down for easier digestion WITH visual physical demonstration of the obvious.... and people are still meticulously complaining and denying even the plausibility that a mechanical device could not derive power from a magnetic system built on this principle. I mean, what's so hard to understand about a magnetic "gate"? we all can see it. we can see the energy produced. and if it were removed, it could possibly work.

[Drdump1]

mmmmnnn stick abalance light weight magnet on Top n Bottom of" Drinking Bird toy" mayb he give ahelping hand 2wankel non stop on your stator magnet motor project kakakaka :)))

[claymodeling1]

Magnets are like springs, you only get energy out of them by intially putting energy into them. But because the force is invisible and mysterious, people think that they are magic, and by some clever arrangement, the forces will be tricked into becoming unbalanced and it will run forever. Nobody tries to build spring motors because that would look stupid.

[smokincrow007]

...

[o0Dreamlike0o]

'and it will run forever'

I don't think it will, as the energy put into the magnet isn't eternal. I agree with you, and am pretty sure a thing like 'free energy' is impossible.

[yoyodude7407]

actually, spring motors are used in wind up toys. but in the sense that you talk about, people have attempted to arrange springs to do what these magnet motors are supposed to do. there is a differenc between springs and magnets.

repulsion: two compression springs pushed together. pretty much the same as repulsion between magnets except that you have to deal with actual physical contact that can make the springs themselves bend and get tangled.

continued in next post...

[yoyodude7407]

attraction: as magnets get closer, the attraction is greater. if you link two tension springs, the closer together they get, the less they pull on each other.

[claymodeling1]

Yea, the curve of attraction is different, but when two magnets touch each other, the movement stops. No more energy can then be extracted. Like a spring that is sprung, you must then put energy into it by pulling apart the magnets, (stretching a spring), to add potential energy to start the cycle over again.

The energy is integrating the force over distance, not the curve of force vs. distance.

[TyPh11]

lol i dont like u very much

you are very intelligent and You are negitive

[ChrisfromSMD]

This is an infinite universe which means nothing is impossible.

[arachnipope]

And yet it still doesn't work. and never will because of the laws of nature. Study why it doesn't work and you will undersrtand why it never can work. it will never self power.

[joelito101]

You are forgetting that we are still discovering. We are looking with new eyes what has always been there but never really studied.

Magnets are the way to Free and inexpensive energy. Let us keep working and we'll tell you. Otherwise join us and find out for yourself.

[o0Dreamlike0o]

Magnets may make energy cheaper, and more effective, but they will never 'produce it' .

[argosy2006]

i have a magnet generator, i'd show you except i died on de way back to my home planet

[o0Dreamlike0o]

Oh but you could still send it to me via your intergalactic port, right?

[RichardJordan100]

seriously, me too

[jupy921]

I want it to work, but...like in the Movie Envy, "Where did the poo go?"

The energy has to come from someplace. The idea is cool, and the motors (some of them) are works of art.

But, where is the energy coming from?

Thanks for posting. There's something about magnets that never gets old. Even if we are not getting free energy from them.

:)

[Wiktus1990]

Magnets do get old. The pole strenght decreases as it iteracts with anything. Think we should treat magnets as a source of energy (ofc charged before).

[EdgarBoffin]

Its like going up a hill then going back down the hill. You cannot expect that you will have more energy than you began with once you get back down. Sorry, but 0 does not equal 1.

[EdgarBoffin]

I've said it before on other videos, but at the risk of being redundant I'll say it again: this "sticky spot" is the absolute fatal flaw in the whole design and the entire reason it cannot ever work. It isn't a "problem" to be cleverly solved using new arrangements of magnets. The work done in a vector field going from point A back to point A, no matter what path is taken, will equal 0 if there is no friction, and less than 0 if there is friction. It is a simple matter of mathematics.

[arachnipope]

EdgarBoffin, well said! I have typed my fingers raw trying to get people to understand basic physics. The same force that wants to turn the rotor is also trying just as hard to stop it...net zero. Overunity is a false religion that's hard to give up.

[janne808]

This is not true in general, but only in the case of conservative vector fields.

[johnnytheprick]

ARACHNIPOPE,

and for 300 hundred or so years, everyone but one man knew the world was round.

you sound like charles h duell who once said: "Everything that can be invented has been invented."

lucky walt disney, michael jordan, lucille ball, the beatles, thomas edison, and abraham lincoln didnt listen to the likes of you huh?

[drjekill2986]

The concepts posted have merit. If only the designers were to consider using outside power to overcome the "sticky spot" success would have been attained already. The energy is not free, it comes from the magnetic force introduced to these materials during a manufacturing process in which electricity is used. Having said that, I applaud these designers for trying to find a solution to our catastrophic ecological and energy problems. All others either help or stop demoralizing their efforts.

[drjekill2986]

Overunity as a physical principle cannot exist. This is very clearly stated in the law of the conservation of energy. "energy cannot be created nor destroyed , it can only be transformed from one stage to another" However, mechanically, and as perceived by a human, with regards to the factor of "effort" it is apparent! (though not mathematically feasible) Nevertheless, It seems that the approach taken in all the experiments I have seen so far in Youtube is the wrong one. (to be continued...)

[1980PintoMan]

He doesn't actually have the "sticky spot" set up. There will be magnets that are going to pull more than his "cure" will. All designs could say they solved the problem by removing the problem and saying look what happens when I push it with my fingers, success. Only it isn't.

[bollox93]

LOLOLOLOL. Have you retards any idea how much you amuse us clever people? HA HA HA

[Sondonyr]

Hopefully that disc is level and the weights are correctly countered on it. Otherwise a pendulum effect would offset any results.

[doug694]

Stack several of these on a spindle, with offsets, it would get rid of the need to decrease the distance for each stage since they wont interfere.

...but I fear the energy 'gained' from each kick will not be overcome by the energy spent to escape from each stage on the way out. Anyway using stacked stages is the way to go with this.

[BRAIDERMAN]

Yes, introducing more magnets will make more sticky spots. Furthermore the magnets also add to the effect. Lets do some theory-

Every point on the disc starts at some potential energy point. Because the disc is circular, every point may well run down the 'potential hill' but it has to come back up that potential hill, and arrive back at the same point it started from originally. So there is no gain in energy. The potential energy points arise from the magnetic fields that are set up. No gain !

[CAMBOD55]

kinda reminds me of Stone Hedge!

[cuervo1957]

It's an interesting theory but why don't you just finish the model, THEN show it to us.

[honda1386]

It's not just your opinion, it's a law of physics!

[1stAmend1791]

In my opinion, you can not create more energy than already exists in the universe. I believe those that claim so are overlooking things. It could be as simple as the human energy to flip a switch, moving cables back and forth, people that don't understand how magnets work, etc. If any component wears out and needs replacement, then that adds energy to the process. Get it?

[LyrumusX]

Although you do make a minor point, you are looking at this ("free energy") the wrong way. No, of course you can't make more energy than the universe already deals with, but what percentage of energy truly present are we tapping into. Magnets would be one form of that. Gravity is another. You have to use these naturally occuring energies in an asymmetrical fashion. Like a windmill or hydroelectric system could be looked at the same way...

[rayunseitig]

Don't worry about free. Someone will figure out how to charge for it. LOL

[rayunseitig]

Maybe not "making" energy, but figureing out how to use some of it, that we "discover.

[LyrumusX]

Yes :)

[cuervo1957]

You need to look at the work Mr. John Searl, from the UK, is doing. He has some videos on here. He has invented a magnet driven device that does work. Check it out.

[RexNunc]

3 gates would help, no?

[realestMC]

really nice job using the CD like that, that's a great low cost resource

[KnightChatX]

The problem here is the magnet's aren't angled they're flush so the magnetic force isn't changed to move the object in a direction to achieve rotation, so instead of pulling and shoving it's either pulling or it's shoving, so once that momentum is lost then it sticks because the magnet field holds it there.

[KnightChatX]

Try angling the magnets.

[dicksprojects]

you should have like 3 gates instead of only one.

[challenger159]

I will however try both, Bismut as the most diamagnetic matter (other than correctly aligned pyrolytic graphite), as well as MU-metals that are used by the industry to shield non-HF magnetic fields. For example the steel plates that are sandwiching the magnets inside a harddisk drive are made of MU-metal.

[challenger159]

Since I'm working on this issue too, here are some ideas: Currently I'm thinking about to use special materials to "shield" the magnet when the rotor passed the sticky spot by inertia. "Shielding" should not redirect or focus the fields, as MU metals maybe do, but rather weaken it, as Diamagnetism does. (2b continued)

[challenger159]

Good job so far. This is the columbus egg so to say, to pass by the sticky point. Good luck man.

[Serrpentina]

The self-construction of a Schietti's magnetic wind power station.

You need to buy an ordinary small wind turbine and change it a little bit.

At the end of the blades you need to place some oblique magnets

Outside, you need to place a wheel of magnets of opposite polarity. Neodymium is a good magnet.

By increasing the circle diameter you'll inevitably reach the inertia break point.

[gkellett]

Let's see the finished product.

[Marxmanster]

you are powering up the potential difference with you fingers...

[SOGGYmilktoast]

You were so close you can taste it. I cracked the code. My video will be presented shortly. There has always been ONE small step overlooked. It is NOT perpetual we seek, it is free fueled energy and this I have done!~

[JobbeLoppe]

HAHAHAHAHAH too sticky yammm !

[Asylumescapee69]

ok here's what will happen.

there will be a significant difference between the first and the last magnet's pull right next to eachother.

You are relying on the left magnet to pull the wheel from nothing when you hold it to the left.

Then the next magnet grabs it and the next until it gets to the last magnet which holds it.

Another magnet may hold it, but if there is no dead space to be pulled from, then you will have to add the spin. The spin you give it will diminish.

[Rusvi1]

Overunity=Perpetum mobile....Please, read physics 1O1, you can not get energy out of nothing and you definitely can not get more or same ammount of energy then you put in to the system only less. The question is: Is it cheaper then other engines?

[jummence]

actually most scientists believe it is possible to achieve overunity, but until its proven and studied for all possible outside energy sources they aint gonna re-write the laws of physics. who knows the laws could be wrong.

[o0Dreamlike0o]

I'm pretty sure your ignorant friends aren't 'scientists'

[Miguelnsc]

dummy vid

[fatihuslu]

it wont work. i am sure...

[Eltimple]

Ridiculous! bit like the typo, who ever heard of of a magnet being attracted to another then escaping. The momentum created by the attraction will not normally allow the rotor to pass the stator, It will wobble back and forth till the rotor settles , stuck to the rotor

[NPSF3000]

Come on this is rediculas. Ever heard of momentum??? the momentum of the first magnet pulling it towards it alows it to move past it, this however will not work as to reset the system he has to move it back(put in energy).

[kossxf]

did you ever finish this?

[Eltimple]

the bloke disappeared from the overunity web site shortly after posting this video, the video was also pulled from the site too. As to whether he was on to something , your guess is as good as mine, but this video shows what everybody is looking for. A way to get past the sticky spot...

[begone77]

uh it does have sound...

[Omaga]

sorry i found out my sound card was not working

[begone77]

wow I just saw your videos, and wow, very interesting idea,

are you going for something like overunity? (sorry if I used that term wrong I just did very little research after seeing your video)

I think your design is quite brilliant, also is torbay your name?

[Eltimple]

Perhaps right , but he is trying to get over the sticky point in the takahashi motor, maybe your motor could provide a solution....

[mervace]

Nice try. I think the only way you will get a complete revolution is if you hook up the spindle drive motor to the mains! Have a look at my "Unusal Motor Design"