BlazBlue TE stick + my new 46" LED TV

[LAOxFEAREAPER]

song name?

[halogodess]

so sexy great job

[Renas88]

eyy nice pic.. is there maybe a website were i can order pictures for the TE stick? i got one myself but pretty tierd of the picture.. would love to have something new:D

[matau32]

can send PSD file? :D

[FFx2Rikku931]

Is the stick really good? im thinking about getting a TE stick soon and i might get a blaz blue one, and the artwork on your stick, did you put that yourself or its already like that??

[TranceCore3]

The put like no effort in the BB stick. I ordered one from Amazon,and the microswitches were dead, and now the entire thing is dead from a short in the USB wire.

[seekerjet]

@TranceCore3

Luckily, this isn't a BB stick but a TE Stick with my own BB picture on it.

[TimBatan]

that Tv is awesome

[daidouji]

Sick.

[sprawkaa]

Do you lag when playing on LED TV ?

[seekerjet]

@sprawkaa

Through HDMI it lags. I use an XBOX 360 with VGA-cable on it which does not lag.

[pacboy24]

@seekerjet agree, i use dvi instead.. but with hdmi, can you just select game mode? in the tv settings? cuz it changes it to 60Hz. because i think its trying to do the 120Hz or 240Hz thingy thats why it lags.

hope it makes sense,

[seekerjet]

@pacboy24 No, it has nothing to do with frequencies. HDMI has post-processing to improve picture quality, but that takes time to process. Gaming Mode turns off that post-processing, thus reducing input delay. HDMI still isn't great though. I recommend VGA or DVI for fighting games.

[mrmarzattackz]

@seekerjet what about the standard VA cables that come with the slim. do they reduce the lag? im guessing yes

[superduperdude60]

@mrmarzattackz I would assume so.... but then you have shitty picture quality lol xD

[mrmarzattackz]

@superduperdude60 yeah lol i didnt think it was going to be that bad

[Eddiemaster]

top left hand corner at 0:12... is that a SEGA Dreamcast :O?

[seekerjet]

@Eddiemaster

Yes, a Dreamcast.

[KSWA21]

How much was the TV?

[seekerjet]

@KSWA21

A lot =)

[Grimlock316]

Its a very cool looken stick the only Flaw i can see with it is around the PlayStation home port you can really tell that it was rush cut cause you can see a lot or failing around the inner edge . My suggestion is that get the print laser cut that will give you a nice clean edge, and i don't know what it is about that plexi cover but it doesn't seem to fit on there right i mean i can see gaps in between the art work and the cover there has to be a better way to get a protective finish look

[seekerjet]

@Grimlock316

Last year, I cut it using scissors LOL. I did get a paper cutter last week though. I agree that laser-cutting would get a much better result, but I didn't want to spend too much money on it. The plexi is risen above the bezel, but it's too think to fit within the edges. That's just how this plexi is. It doesn't matter for now though because I'm considering to sell this stick since I've got a HORI Premium VLX.

[Grimlock316]

@seekerjet Oh nice im acually trial and errorin a bunch or ways to make the laminate work the 10 ply lamination thet you can get done at any office max/ office suply store is really nice its thick but not to thick that it goes above the Bezel im getting my art Laser cut right now witch is $12.00 job with shipping. But first i want to test my 10 ply lamination theory . the problem with lamination you have to cut the holes out and the PlayStation home hole out and cutting them out means you have

[Grimlock316]

@seekerjet ... Cut where the Lamination is sealed and cutting where it is sealed is very very tricky to get it without the lamination bubbling up cause if it bubbles up it makes the whole thing look crappy so i plan on cutting just a little of the holes then sanding the rest with a hand sander and a cylinder sanding bit this will smooth out the holes and may prevent it from bubbling at the seal and since its 10 ply laminating its thick enough to where it can be safely sanded

[seekerjet]

@Grimlock316

Thanks for the tips. The paper is thick, cardboard-like glossy paper. I haven't tried sanding on it. I will most probably sell the stick though.

[TimsonAkai]

sexy tv 

[bankaivsnaruto]

hey , how do you print out the artwork . Do you need a special paper like glossy or matte ?? and if you do can you use it on a regular printer then print it off

[AyeLien81]

noel all day

[HongKongKanto]

and people say pc gaming is expensive

[marco3919]

nice tv dude!!!!!!!!!!

[isko1002]

*droooool* @.@

[xrikimarux]

is there one for xbox 360? i want one with 8 fighting keys.. i saw the official blazblue version, but ps3 has 8 and 360 only has 6.. which sucks.. im kinda waiting for Continuum Shift stick but it comes out in july and i cant wait any longer since super street fighter 4 came out..

[twistedkatana1]

my parents just got the 55 inch version of your tv. its fucking crazy good looking. i still haven't modded any of my sticks aside from putting plugs into two of the buttons on each of them.

but also.... didn't like blazblue at all. but hey... to each his own.

[seekerjet]

@twistedkatana1

Cool man. When I bought this TV, the 55" wasn't sold yet. I sold BlazBlue months ago :P

[hybridRace92]

are LCD tvs as good as LEDs?

[seekerjet]

@hybridRace92

A LED TV is an LCD TV with LED-backlight. A "normal" LCD TV uses CCFL-backlight. It saves energy and enables a very slim design. But quality-wise, a LED TV is not better because of LED-light but because they are newer models of LCD TV's.

[xyanide1986]

To be honest I think it would've been better without the bezel, perhaps even a full art covered top. High artwork and print quality though.

[seekerjet]

Yup. If the bezel was black or dark-blue it would be okay I think.

[ironhead82]

False info "rumbazz" Best TVS to play any fighter NOWADAYS are Plasmas... Come one 600Hz.. and all have a 0.00001ms refresh rate... I've been with Best Buy for 3 years so I know exactly what I am talking about

[rumbazz]

do consumer LED tv's have good response time. I'm pretty reluctant on buying one because HDMI, Component, and even VGA outputs on HDTV's give me lag. So I just stick to playing on an outdated CRT. =(

[seekerjet]

This LED TV does have lag in games. Even in Game Mode. For the best lag-free performance with good image quality, use RGB or S-Video on a CRT.

[rumbazz]

that sucks. I was hoping to buy an LED tv for great quality picture and lag free fighting games.

[seekerjet]

LED TV has a great picture quality but it's not lag-free.

[bobaguy]

can you make a vid playing sf4 on your new LED tv since it's refresh rate is 100Mhz?

[seekerjet]

@bobaguy

Good suggestion. I could, but my digital camera isn't 100 Hz. On my other YouTube channel, "sf4arcade", you can see my SF-matches. They are recorded through composite on my TV-card in my PC. I have S-Video working on the TV-card so I'll be able to upload sharper videos from now on.

[kastor39G]

what size paper is ur template printed on?

[seekerjet]

It's printed on A3, but the "Letter" format would also be suitable.

[kastor39G]

@seekerjet Thanx alot. Thats some nice artwork.

[seekerjet]

No problem, thanks.

[SakuraOwnage]

love your TV dude and damn I like that custom artwork even more, I am hoping to customize my RAP3 soon with artwork and sanwa buttons.

[seekerjet]

Sanwa parts are inexpensive so it's a good idea to get them.

[KLVNW]

whaaaa LED TV!!! :D

[seekerjet]

Yup, I chose a LED TV because of the low power consumption and the slim design. I must add that you'll get used to it very soon. Actually the thickness doesn't really matter. If the TV would be 5 times thicker, it wouldn't be bothersome after a couple of days. The most important factor is image quality.

[KLVNW]

Wat is het type van de tv? Trouwens, ik ben het, celc1us :p

[seekerjet]

Samsung UE46B6000 LED TV (serie 6 LED TV).

[zakuzen]

hey you got a new TV, coooool

[seekerjet]

yup, it's large enough to properly watch BluRay movies.

[ArmadsSilicos]

I feel like an idiot but how were you able to swap the artwork like that? I know you have the link for it, but how exactly do you get a professional high gloss print like that? I'd appreciate it so much, that looks like my dream stick. i'm a Noel player

[seekerjet]

I wrote a full guide on how to do this in my "SFIV Tournament Edition stick - Chun Li theme " video.

[Xxblade25xX]

nice te u got there blazblue

[seekerjet]

thnx bro

[Xxblade25xX]

its that blazblue theme song?

[seekerjet]

Yup.

[XxBK201xX]

do you mind sending my the art template? please =)

[seekerjet]

I put the template for download. Click (more info) in the video description to access the link to the high-resolution JPEG.

[XxBK201xX]

thankyou very much

[seekerjet]

enjoy

[toyv1ru5]

AWESOME !!!!! i like your house its clean like MINE=)

[seekerjet]

I like to have a well-organized place :P

[crimsonshadow777]

that blazblue artwork turned out fucking nice. Enjoy blazblue its a fun game : D

[seekerjet]

Thanks! I picked up BlazBlue from the post office an hour ago. Haven't opened it yet. I'm going to try it out right now!

[mig189189189]

Nice work you did!

[seekerjet]

Thanks man :)

[Six6TwoProductionz]

you did a good job..shit looks professional man. how much did the original stick cost?

[seekerjet]

Thanks. The retail price is $150. I paid more because it was nearly impossible to obtain one several months ago due to the high demand.

[tony77tony77]

is that a good stick?

[seekerjet]

It's the same stick as in my other videos, but now with BlazBlue artwork. I edited/printed/cut the artwork and put it underneath the top panel.