Scooter Zone How To: Install a Brake with Nick Darger

[KevinScoots4Life]

Can u use Fakey Brakes on the standard phoenix decks?

[harryhewermusictv]

does my brake spring need to be at a right angle

[spoofystudioz]

@HazRx tighten your headset

[joshc237]

does this work with a ultra pro

[b0nEsp100]

would a lucky shorty brack fit on a standered phoenix and will it fit on an Aosv2

[JAB1398]

when you buy the fakey brake does the spring,brake axle and the nut come with it?

[HazRx]

how do i stop my mgp team edition bars to stop wobbling?

[crazykiller4543]

a pro model deck? wow .

[Soerenkid11]

can you adjust how far it is from the wheel?

[samuelmagic1]

What about a mgp scooter it doesnt have the hole thingy on the side how do you install a brake with a spring on the scooter

[ScooterZoneVideos]

@samuelmagic1

thats extremely hard and complicated aha

[TheLewis29]

my slam quick stop brake wobbles and it is really tight how do I fix it??????



[ScooterZoneVideos]

@TheLewis29

dont buy slamm... thats how to fix it

[TheLewis29]

@ScooterZoneVideos y buy a scooter that cost alot of money for my first scooter

[superscooters31]

can you take the spring out before the brake

[ScooterZoneVideos]

@superscooters31

the spring is held in place with the brake

[bradleys8s]

what brake is it



[ScooterZoneVideos]

@bradleys8s

pro comp fakey brake

[askem35]

@ScooterZoneVideos y is it called fakey brake

[DingMafia360]

what about madd gear pro team edition scooters that dont use springs and instead of holes at the sides it has two holes at the bottom???? help??

[ScooterZoneVideos]

@DingMafia360

thats called a flex fender

[Mrshoes81]

does a pheonix flex fender work with district v2i?

[ScooterZoneVideos]

@Mrshoes81

you have to drill holes for it

[astroboirap]

he looks stoned

[KSproSC]

Can you put a Phoenix flex fender on a MGP team edition????????

[ScooterZoneVideos]

@KSproSC

yes you can

[Eighttroy19]

does a fakey brake fit on a French ID deck?

[ScooterZoneVideos]

@Eighttroy19

no thats the french id brake is the only brake that fits

[Bocaseem]

i got an mgp team deck, and the flex break broke, how do i mount a break when there are no holes on the sides?

[ScooterZoneVideos]

@Bocaseem

you cant, try to bug mgp for a replacement or get a phoenix switchblade brake

[krisper2010]

wich deck is better : mgp or razor ultra pro deck?

[maddgear15]

@krisper2010 mgp is way better

[instinctscooter]

@krisper2010 mgps are stronger but rup is much lighter so you might learn quicker i dont know and as for best one personal preference

[zackaryjenkins]

@krisper2010 maddgearpro deck is better

[ScooterZoneVideos]

@krisper2010

they are both good, but the ultra pro is more compatible with aftermarket parts

[scootrs4life619]

@jamesflynn1999 I forgot to put the @ on the comment bellow

[scootrs4life619]

jamesflynn1999 Magray do a flex fender for Razors and MGPs that just slots in to the rear axel and doesn't require any drilling and Dogg scooters.com sell it for £20.00 which is I think about $26.00

[jamesflynn1999]

does anyone know were a can get a flexfender for a grit without drilling or a brake witch is dialed

[ScooterZoneVideos]

@jamesflynn1999

no clue man

[instinctscooter]

@ScooterZoneVideos mgray scooter co brakes i think

[hilly800]

@jamesflynn1999

Im with you i recently got Grit Elite 2 2011 but i cant find a good brake..

[ScooterZoneVideos]

@hilly800

i would sell the whole scoot and buy a new one before investing money into that

[MegaDubstep12]

Iv got a normal mgp team edition but 1 side of the brake has come out and I have no idea how to fix this. PLEASE HELP !!!

[ScooterZoneVideos]

@MegaDubstep12

line the pin up then hit it with a hammer

[MegaDubstep12]

@ScooterZoneVideos i cant line it up its inside the metal :/

[bflet006]

i have a bulletproof brake put it sit to high do u have any suggestions?

[ScooterZoneVideos]

@bflet006

try to fold a washer in half and place it behind the brake

[ZaneScooter]

Nick, i went to scooter zone at laguna hills and someone who works there put the phoenix brake on my mgp deck without the rubber thing and it snapped today at the skatepark. i want to know if there warrented cuase im tired of breaking flex brakes evrey month and dont have the money to buy new ones evrey month.

[ScooterZoneVideos]

@ZaneScooter

sometimes they dont fit on the mgp's with the pad. either way it wouldnt have made a difference on it breaking. as long as you have the recipt and its been less than 90 days you can warranty it.

[dragonforce7497]

can you install the fakey brake on an ultra pro lo? do you need to modify anything on the deck? PLEASE RESPOND

[ScooterZoneVideos]

@dragonforce7497

yes you can. its made to work perfectly on the ultra pro without modifying it at all

[MrMelendez123]

okay thanks big help love your videos

[MrMelendez123]

Would a lucky mini brake fit on a razor ultra pro lo please respond

[ScooterZoneVideos]

@MrMelendez123

yes it will

[harmo1998]

can i put a shorty brake on a razor ulta with out modifing the deck plz respond

[ScooterZoneVideos]

@harmo1998

yes you can

[xXxAeryachexXx]

Does the fakey brake install onto a mgp deck without drilling/modifying the deck? Or no? 

[ScooterZoneVideos]

@xXxAeryachexXx

no you cant.

[zReactzzzHD]

This is getting me so frustrated can a fakey brake go on a epic deck?

[ScooterZoneVideos]

@zReactzzzHD

yes they can

[22AH26]

hey nick , i just got my wheels and i put my abec 7 bearings in with the spacers . and im using the razor ultra pro axel and the two black things in the back and when i tight the back and the front wheel its has play what shold i do ?

[ScooterZoneVideos]

@22AH26

the bearings might be worn out

[Clan3Films]

what kind of brake is that?...and do lucky standard brakes fit on a razor pro deck?

[ScooterZoneVideos]

@Clan3Films

fakey brake

[mrrandomness531]

hey do you guys carry flexfenders if you do can you make a vid on how to install it

[ScooterZoneVideos]

@mrrandomness531

yeah we do. They are $25. They just bolt onto the phoenix deck or TSI deck.

[mrrandomness531]

@ScooterZoneVideos could they bolt on to my mgp?

[ScooterZoneVideos]

@mrrandomness531

If you drill holes and modify it yes.

[EthiopianSCOOT23]

What is the length of the brake bolt so I can go buy it at Home Depot.

[ScooterZoneVideos]

@EthiopianSCOOT23

if its a pro model i think its 70mm. but if worst comes to worst just take it into a hardware store and try different bolts out

[EthiopianSCOOT23]

the rod to put in my brakes are too short. the rod dosent fit in both holes. Are the rods different sizes?

[ScooterZoneVideos]

@EthiopianSCOOT23

yeah try a hardware store

[Camaro67100]

Do u guys still sell pro models? cuz im thinking of buying one and how much is it?

[ScooterZoneVideos]

@Camaro67100

nah we stopped. check out the ultra pro, its much better and only 80 bucks

[AZNShuffler911]

I Need help. everytime i put the axel through the spring the axel will go in an angle and i cant line it up with the second brake hole.

[ScooterZoneVideos]

@AZNShuffler911

Try tilting the brake a little bit. You need to just connect the dots and let the brake move as it pleases

[ScooterGuyProduction]

@ragdol187 why would you have an A model??

[chris814573]

How do u stretch the spring?

[ScooterZoneVideos]

@chris814573

You dont need to stretch it. But you can use pliers to stretch or squish it

[superman2ify]

I cant get my brake off the nut is totally rounded how do i get it off?

[ScooterZoneVideos]

@superman2ify

use pliers or an 8mm socket wrench

[DirtVideo1114]

Do you need a certain spring for a ultra pro model to use a fakey brake? The stock spring doesn't seem to work

[ScooterZoneVideos]

@DirtVideo1114

No the stock spring and bolt will work just fine

[ragdol187]

what if it is the old razor a model, square decks?

[ScooterZoneVideos]

@ragdol187

There arent any other brakes that fit those models. sorry man

[cazabmx]

thanks

[propark99]

how would u put that brake on a mgp nitro extreme coz they have mgp flex fenders and have no holes to put the brake anxle thing through ?? some1 plzz reply

[ScooterZoneVideos]

@propark99

The only thing i could think of is getting a brake bracket from a phoenix and using that

[andrevideosrawsme]

@propark99 the brake unscrew thing is under the deck, flip it over and lok near the spring it should be there

[xSONICxfreak123]

i have the razor ultra pro and the spacers on the black plastic things by the wheels and its to short and my wheel moves where can i get a new spacer its just like a bearing spacer bult longer lol

[ScooterZoneVideos]

@xSONICxfreak123

You need those spacers, without them you wont get the right pinch. You need to get a hold of some sort or washer to fill that gap

[xSONICxfreak123]

@ScooterZoneVideos where d oyou find those

[ScooterZoneVideos]

@xSONICxfreak123

They come with the scoots. Try to ask around with your friends and find someone with some extra ones.

[RandomDude1999]

would u guys put a phoenix switchblade break on my maddgear.?

[ScooterZoneVideos]

@RandomDude1999

Yes we can.

[pagaye34]

how do u make blazer brake low

[ScooterZoneVideos]

@pagaye34

Try to jam a washer behind your brake

[imtherealkilla09]

is it solid

[ScooterKrew710]

Hey I have a black label ultra pro and a lucky brake I just got a new brake Axel bolt but even when it's tightend all the way it still moves and my scoot isn't dialed.... U know how to fix that

[ScooterZoneVideos]

@ScooterKrew710

Well, for one your scooter will always make a noise. And your spring is prably worn out. Try to get a hold of a new one. It will help

[TeamxProClan]

could you do a vid on how to put a deck on pls

[BillyBailey8]

How do you put a Phoenix Brake on a Madd Team Edition without the hole in the deck?

[ScooterZoneVideos]

@BillyBailey8

You will have to drill a hole in the deck and modify it to fit.

[evand777]

Thanks this really helped try to do more!!!

[ScooterZoneVideos]

@MrRazorPro44

No they dont. They work just fine with the stock spring and bolt.

[paRtyoVaHeaa]

@MrRazorPro44 for me it was hell to get mine on

[ScooterZoneVideos]

@paRtyoVaHeaa

I dont have a Madd Gear brake to install. You will just have to give it a shot.

[ScooterZoneVideos]

@MrRazorPro44

It might take some modification but I have seen some fit.

[ProTrickZz]

what brake is that?

[ScooterZoneVideos]

@ProTrickZz

Its a fakey brake.

[ktran18]

Plz make a totoiral on how to make ur scooter solid thank you( ´ ▽ ` )ﾉ

[SweetTuckNoHanders]

I have a stock brake and I'm wondering how to make it solid and dialed. I tried putting bearings and other stuff under tge spring but it still makes that clanking sound when I drop my scooter. Any tips?

[ScooterZoneVideos]

@SweetTuckNoHanders

Then your spring must be worn out. Try to get a hold of a new one.

[BMX0Parkour0Unicycle]

@SweetTuckNoHanders instead of using a bearing use a lego block it wrks better

[KTr00P3Rz]

how do u do it with a jd bug coz i followd all of ur instructions and it dident work it just cept on falling down

[ScooterZoneVideos]

@KTr00P3Rz

Do you have your sping in? cause that might be it.

[deadpeace6868]

i have the same back wheel

[ScooterZoneVideos]

@MrLaostar

It is supposed to be really hard to line up. Just make sure everything goes back in the way it came.

[ryuchankido]

@ScooterZoneVideos i know too hard. "FLEX FENDERS EVERYONE!!!!!"

[xboxTVchannel]

will a standard brake spring fit it

[ScooterZoneVideos]

@xboxTVchannel

Yes it will. You use the same bolt and spring that came with your scooter.

[ScooterZoneVideos]

@ClickItTV

Yeah it is supposed to be hard. Just make sure you have your back wheel off to make it easier.

[bryans1998]

can a fakey brake fit on a madd deck?

[ScooterZoneVideos]

@bryans1998

Yeah it can. I had one on my mgp but it sat up super high to i had to put a washer behind it.

[sk8er9721]

what scooter is that

[ScooterZoneVideos]

@sk8er9721

The Epic Street Deck and the Epic Zero Offset Forks.

[dannyfanny451]

wht brake is it ???

[ScooterZoneVideos]

@dannyfanny451

Fakey Brake. You can get them at TiteToyz.com

[Xxsideshow22xX]

wow you look real happy

[ben10199514]

make a video of how to uninstall madd gear pro breaks and how to install..

[ScooterZoneVideos]

@ben10199514

Just use a hammer and pin or small screw driver to knock the pin out. Then use a hammer to knock the pin back in or replace the pin with a bolt to make it easier. Its not too hard just try it.

[ShuriStr1]

how to i uninstall a mgp brake for a mgp?

[ScooterZoneVideos]

@ShuriStr1

Just use a hammer and pin or small screw driver to knock the pin out. Then use a hammer to knock the pin back in or replace the pin with a bolt to make it easier. Its not too hard just try it.

[DiiSTRiiCt]

5th :D

[mcrfankifo]

4th :)

[MultiMessUp]

3rd HECK YA!!!

[codyroymoore]

second :)