(1080P) Koolance CPU 360 CPU Waterblock review

[floridabowhunter]

what could cause low performance with the cpu 360? i have had mine for about a year now and i have noticed with the same cpu and clocks as the test my temps are way higher, 48c at idle. i have a feser 240mm radiator and a 500lph pump and im using distilled water on a single loop. why are they so high compared to your tests?

[strikerhiryu]

Awesome Trub!

[enorma29]

friggin giant GPU @ 6:51

[Svartluder]

I have to say that your reviews are great and very in-depth, also that you just convinced me to buy this cooler. Thanks.

[GreenyPoop]

@psyphormer better than made in china in my opinion. I just don't like to support an authoritative government who wants to become a super power.

[philipbraidi]

Dear Trubritar.

Love all of ur reviews. Very Pro. Could you kindly advice with specs for a new 3 SLI WC Rig?

1. Radiator & Reservoir Brand & Size !!!

2. Pump Brand & Specs !!!

3. Hose Size !!!

I was thinking: SilverStone 1500 PSU / Intel 980 CPU / EVGA 480 GTX WC / Corsair GT 12 GB / Koolance CPU-360 Block / Feser "Monsta Lite" 420 Radiator / Innovatek HPPS Pump / Danger Den RAD-Reservoir / EK MB Block.

Kindly Advice.

Thank you.

[mintico]

how u pay for all those stuffs? wow

[WillKillForName]

How loudly does the CPU 360 run without any noise reduction measures?

[Bob8673]

Is this the best waterblock out now?

[Killer101Noob]

@kop4321

that's what a shuriken is. :P

[kop4321]

Looks like a ninja star lol

[ReNuTechSolutions]

Would it have made any difference in the temp & pressure test if they used 10mm ID tubing instead of 13mm ID on the CPU-360? Here's my setup: Koolance CPU-360 for the i7 930 Core, RP-1000BK (Reservoir & Pump) Kit & Koolance 3x120mm High Flow Rad (HX-CU1020V). For the setup I was advised to use 10mm ID instead of 13mm ID cause it would've taken more for the pump to push that Liquid Coolant through the tubing resulting in less efficient flow. Any thoughts from anyone who might know? Thanks...

[computerfan96]

cool..........xd!!

[casser24]

Is a worth an upgrade from CPU-350 AC to the CPU-360? thanks

[thegman2]

hi! with 13mm(1/2) compression fittings fit on this?

[CRAKIZGOOD]

is this still the top of the line ?

[dmsnsa6679]

Another wonderful video, very thorough help me decide on it for my i7 920

[sdiablos]

Will it fit on my Gigabyte EX-x58 Extreme motherboard??

[trubritar]

@sdiablos : Yes, it comes with a universal mounting bracket.

[pam0077]

Too bad you didn't review the CPU-360 up against the real competition --- the Apogee XT and the EK Supreme HF.

[mhaneline]

@pam0077 Yeah, the Apogee XT is beastly.

[Jefneurotoxin]

Watch the official GTX 480 DX11 GAMES VIDEO

Metro 2033, just cause2 :D

/watch?v=THQ_KGISY6k

[Eclipezz]

damn Trubritar you rock ^^

[Metallica199415]

Cool *.* Nice video Trubritar :D

[xxnarekxx818]

thx for the video, but I have a question: isn't the cpu 350 actually better then the 360? the tests show it that way

[EliteSoldier112]

WOW this is supposed to be even better than the HK 3.0 CU?? That can't be!

[sebastianyarade]

I think u should upload more vids. One or two per week like, for example, 3D GAME MAN

[RydekSan]

Thanks for the vid Trub, good as always

[stevenvandewinkel]

please test the 980-x...

[jfrydom]

@stevenvandewinkel hes getting the sr-2 for dual 980s

[waixis]

EVGA's Classified SR-2 mobo supports dual QPI Socket 1366 Intel Xeon 5600 and 5500 Processors only, so i would really like to see this dual 980-x set up

[yusukegarners]

Geek Power!!!

[L4veyan]

pause on 0:26 = priceless face

[codyxcaution]

@L4veyan He was so excited he was about to cry. :D

[L4veyan]

Yeah absolutely phenomenal:D

[cxszdx]

Good info trubritar

[Xigmatek]

Absolutely Phenomenal Review as Always Trub!

Thank you!

[micropage7]

Watercooling? Cool, important? Maybe not, especially when u dont overclock it, itz kinda little bit harder to maintenance although the performance is better

[DC211228]

why is it that trib's videos always load slow as hell? traffic? i don't have great Internet but these are always the slowest.

[jdookie2908]

So, according to this test, it appears that the 360 doesn't do as good of a job as the 350 already does. The only difference looks like less of a pressure drop. Would this be correct?

[trubritar]

The CPU 360 yields an approx temp drop of 5-6'c per core Tj temp over the CPU 350...as well as being less restrictive.

[jdookie2908]

Hmm, I must be looking at your graphs incorrectly then. The CPU-350 is the purple line, correct?

[trubritar]

CPU 350 was only listed on the Pressure differential test.

[jdookie2908]

Well, next cpu upgrade will have to be coupled with on of these babies. :)

[gamakigi]

trubitar you must test the ybris black sun ;)

[antipoopydick]

Where's the 345 would like to scope that out. Wasn't on the site.

[trubritar]

Check out one of my earlier Videos :)

[antipoopydick]

Noticed the curvature to the 345, 360 have one? Obviously it looks like the curve on the 345 is protruding. Even if the CPU was lapped it wouldn't sit flat with the block. I take it you don't lap your CPU's for good reasons, but would this benefit with the 360?

[timvoong]

lol welcome back to posting a video you havent psoted in ages since there isnt much thats new nowadays

[filleman17]

Youtube looks wieerd! :S

[doomtomb3]

Extreme professionalism. Keep it up.

[dazza2708]

ABSOLUTELY!

[Mr0ro]

dude, you shouldve used a hotter cpu for this test. Cause this tests were at 1.2 volts? comn man...who overclocks their pc and leaves it at 1.2 volts...who? I want to see this block at 1.5 volts. Then I'll believe if its good or not. this test was garbage

[trubritar]

Voltage abuse is a common practice of the OC newcomer...

For this OC test, the CPU was 100% rock stable using the lowest voltage possible to maintain 100% load over an extended period of time (this takes practice and is the ultimate goal)...I.5V was not necessary.

If you require assistance with overclocking, please feel free to "Google" or swing by our forum.

Trub

[Sacificeuntosebek]

Anyone using 1.5v is either doing it wrong ... Or pushing something beyond where it wants to be at all.

[jdookie2908]

I'd love to actually see one of trub's overclock templates just to compare his method with mine. Everyone has their own way of overclocking, but some just always seem to be better at it than others.

[nobodypersonsomeone]

LOL in the tags, one of the words is "Porn"

[atomdragon4]

"PC-Porn" HAHAHHAA (in the tags)

[nobodypersonsomeone]

Oh right, I didnt know the "PC-" and "Porn" were all one word. Lol PC porn

[atomdragon4]

Hahahhaa xD

[feAr636]

Thanks! Now I know what water block I'm getting when i finally try my first water cooling job, I just need to know the best parts because im deathly afraid of leaks in my system

[benjaminexell]

still going strong m8

thats a pro review (:

[Shadownet123123]

Absolutly FENOMENAL xDDD

[mastermindzh]

xD i have a sentry 2 fan controller as well! but i'm using it for a pentium 3 :P

[PortaleMedia]

awesome review

[al2cl3]

You are making the best pc parts review out there! Thanks Trubritar!

[trubritar]

Thank you...

Trub

[krelakuma]

trubritar u have brilliant in depth reviews! are you originally from wales in the uk?

[trubritar]

Yes, I'm originally from the Swansea area.

[krelakuma]

: ) i have a few questions for you mate but I will go on the forums for that

[akelaristera]

I love Koolance products but the cost of shipping to Cyprus is hugeee

[TheDeadlyAvenger]

This is what I like about Trubritar's reviews, he ACTUALLY tests stuff throughly, unlike a certain other "reviewer" I could mention, who simply states the obvious and regurgitates the spec list which anyone could go and read.

[sonic003573]

EK-Supreme HF Acetal+Nickel or

EK-Supreme HF - Nickel

[FuenfamTag]

Great and very detailed review. Now there are now questions anymore....5/5*

Thank you very much. Take care and many greetings.

FuenfamTag

[lightphoenix1]

Well done Trub, it's an amazing waterblock!

Keep up doing the great work mate!

[lightphoenix1]

Well done Trub, it's an amazing cpu water black!

Keep up doing the great work mate!

[GreenyPoop]

designed in USA, but made in Korea... How can the us manage itself if most manufacture jobs go to the far east.

[Herooftimex]

fantastic review. Great job.

[yasserlee]

MAN YOU R PURE BRITICH

AND I LIKE THAT

[OtherVincentLee]

360 or 350? which is better???? I want to know temps not flow rate differential and pressure over the coldplate.

[pika198]

@OtherVincentLee Current list goes like this:

1. EK Supreme high flow

2. Koolance 360

3. Apogee XT

4. Heatkiller 3.0

[bequinta1]

awesome review. Love the vids, keep em coming no matter how long it takes.

[PR0XXIE]

Looks like a shuriken

[yasserlee]

@PR0XXIE AGREE THE ONE USED BY NINJAS

[cal920c]

lol, why didn't i think of that?

[kidowner]

@PR0XXIE yea.. XD

[sonic003573]

Swiftech Apogee XT?

[firestormcomputers]

Yeah, I was going to say that is missing too.

I am pretty sure the Apogee XT is still the king.

[scottycatman]

@sonic003573

EK Supreme HF?

[Stealth42o]

@sonic003573 New king of the hill is the EK-Supreme HF with injector plate #1.

[ststephen]

trub why you not around as much i miss your gaming rig reviews with games

[mastermindzh]

@ststephen yeah me too !

[ikcti]

*drools*

[runie360]

So you can adjust how the waterblock is mounted to change the direction the outlet is facing, that's pretty neat.

[djtheextremegamerpro]

at 6:57 I have that same fan controller in my rig

[Kr4zi4ur0mg]

wow! 5/5 no doubt.

[TylerTron21]

looks sick man! 5/5

might try this myself.

trub check my pc and channel out :)  its different

[trubritar]

HD 1080P option will be available when the video has finalized processing...

[uchiha1906]

adopt me? please D:!?