so i was just talkin to a guy at a repair shop and he was gonna charge me 450 to straiten the slight damage on my fender and to change my bumper. fuckin fagget! thanks dude. good vid!
Can you please help me out i ordered a cobra bumper and it didnt come with no screws or bolts at all only thing that came was 6 pins i think that connects the bumper to the car but its really loose, what screws did u use on 1:40 to attach that metal thing on to the bumper? thanks!
Wish I could get a COBRA rear bumper without paying the price of a brand new car!!!! What's up with that? How come you can get the front for 3 bills but the back is like 7 or 8 bills?
hey, i have a question.. is it possible to put a fog light on my mustang 2002? i dont have a fog light, but i want to put on both side, so is it possible and if it is how much would it cost to install it?
@freshazimiz4 Definitely possible and somewhat common mod. There are several posts online about people adding foglights (if you have a V6, etc). In fact you can buy the foglight switch from Ford and install in front of the shifter for a nice stock look. I can't detail all of the wiring now but if you can't find those posts/instructions online send me a private message.
(2/2) problems: On the very bottom, there are clip that hold on the bumper that you can barely see unless you are directly under them. I used weird pliers that happened to work to grab them and pull straight out. Im sure needle nose would work too.Secondly, My grille is stock and the tabs that hold them in are extremely strange. You have to use a screw driver and get them out. I found that pushing on the side with a flat nose will help. I got it done and only took about 1 hour! Thanks for vid!
@FordsBetter516 Thanks for the comments across the vids and your experience here because this was a Cobra bumper with different grille. And I hope you like the Maintain Your Mustang DVDs. I'll set two aside for you for when you are ready :)
@AutoHowTV haha i didnt even realize that it was a cobra bumper. my bad. i was just leavin a tip for all those GT owners out there :D hopefully in fall ill buy them because thats a pretty good time to do a tune up on my car, seeing as how the weather really cools down. sometimes its just too hot to work on them. will you be posting any more videos about your stang?
(1/2) Hey man! I love your videos, and I am about to buy the DVDs because after 50k on my 02 GT it could use a tune up. I have been modding my car since I got it at 16 (im 17 now) and I just have AEM intake and Flowmasters.My fog light blew up and I took out of the casing. But it's literally impossible to get the whole case and assembly (not just the bulb) back in. I used this vid and took off the bumper. I ran into several problems and I wanted to address them to help out the mustang community:
@Urbanlegend2009 I imagine it's somewhat similar. This one is pretty easy but usually a you have some clips holding the inner fenders on, some clips along the top/bottom/sides. Just a matter of finding all the bolts/clips and carefully removing it.
Nice video man..I have also taken on a Mustang build of a different sort..I have a V6 That is getting a 4.3L Stroker and a form of FI..I like the Termi bumper this guy has.
so i was just talkin to a guy at a repair shop and he was gonna charge me 450 to straiten the slight damage on my fender and to change my bumper. fuckin fagget! thanks dude. good vid!
1stdeadpresident 2 weeks ago
Can you please help me out i ordered a cobra bumper and it didnt come with no screws or bolts at all only thing that came was 6 pins i think that connects the bumper to the car but its really loose, what screws did u use on 1:40 to attach that metal thing on to the bumper? thanks!
JaYxSWiFTx 8 months ago
Wish I could get a COBRA rear bumper without paying the price of a brand new car!!!! What's up with that? How come you can get the front for 3 bills but the back is like 7 or 8 bills?
123jozef 9 months ago
@123jozef That is weird! I am not sure why or if it's a more complicated piece due to the diffuser or something.
AutoHowTV 9 months ago
@123jozef ebay has the front and rear for 700, i think
gagt27 9 months ago
hey, i have a question.. is it possible to put a fog light on my mustang 2002? i dont have a fog light, but i want to put on both side, so is it possible and if it is how much would it cost to install it?
freshazimiz4 10 months ago
@freshazimiz4 Definitely possible and somewhat common mod. There are several posts online about people adding foglights (if you have a V6, etc). In fact you can buy the foglight switch from Ford and install in front of the shifter for a nice stock look. I can't detail all of the wiring now but if you can't find those posts/instructions online send me a private message.
AutoHowTV 10 months ago
@AutoHowTV thanks man and ill see what i can dig up.
freshazimiz4 9 months ago
(2/2) problems: On the very bottom, there are clip that hold on the bumper that you can barely see unless you are directly under them. I used weird pliers that happened to work to grab them and pull straight out. Im sure needle nose would work too.Secondly, My grille is stock and the tabs that hold them in are extremely strange. You have to use a screw driver and get them out. I found that pushing on the side with a flat nose will help. I got it done and only took about 1 hour! Thanks for vid!
FordsBetter516 1 year ago
@FordsBetter516 Thanks for the comments across the vids and your experience here because this was a Cobra bumper with different grille. And I hope you like the Maintain Your Mustang DVDs. I'll set two aside for you for when you are ready :)
AutoHowTV 1 year ago
@AutoHowTV haha i didnt even realize that it was a cobra bumper. my bad. i was just leavin a tip for all those GT owners out there :D hopefully in fall ill buy them because thats a pretty good time to do a tune up on my car, seeing as how the weather really cools down. sometimes its just too hot to work on them. will you be posting any more videos about your stang?
FordsBetter516 1 year ago
@FordsBetter516 no, thanks for clarifying--I have yet to rip the bumper off my car. And yes, lots of videos in the queue. stay tuned!
AutoHowTV 1 year ago
@AutoHowTV no problem! thanks for all the awesome videos.
FordsBetter516 1 year ago
(1/2) Hey man! I love your videos, and I am about to buy the DVDs because after 50k on my 02 GT it could use a tune up. I have been modding my car since I got it at 16 (im 17 now) and I just have AEM intake and Flowmasters.My fog light blew up and I took out of the casing. But it's literally impossible to get the whole case and assembly (not just the bulb) back in. I used this vid and took off the bumper. I ran into several problems and I wanted to address them to help out the mustang community:
FordsBetter516 1 year ago
would this be the same on most cars? great vid btw.
Urbanlegend2009 1 year ago
@Urbanlegend2009 I imagine it's somewhat similar. This one is pretty easy but usually a you have some clips holding the inner fenders on, some clips along the top/bottom/sides. Just a matter of finding all the bolts/clips and carefully removing it.
AutoHowTV 1 year ago
Nice video man..I have also taken on a Mustang build of a different sort..I have a V6 That is getting a 4.3L Stroker and a form of FI..I like the Termi bumper this guy has.
TheMrhoneycutt 1 year ago
Thank u so much this really helps me
christer1993 2 years ago
Glad you enjoyed it!
AutoHowTV 2 years ago
great video thanks!!
Ridoch 2 years ago
Anthony your da mannn!!!!
alensvsix 2 years ago
great video
coolguy23448 2 years ago
sweet. mustangs seem easy to pull apart.
ghozt369 2 years ago 5