Tutorial on how to install a spindle on your Go-ped

[ilgopeds4378]

make a vid of changing the engine out it wood greatly appricated!!

[splintezzz]

horrible shaky camera.

and u sound like a fag.

i stopped at 'ok kiddies!'

[kylebikesfit]

my spindle screw snapped off ):

blahh ): and still stuck inside.

[PrestonWolff09]

thats happened to me like 5 times! i dont' know why it keeps doing that and its a pain in the ass to get out!

[kylebikesfit]

because you either hit alot of bumbs and bolt comes loose so tighten it each time you ride it. uhh  i liked to bunnie hop on mine alot. got any pics of ur ped?

[PrestonWolff09]

ugh. mine is hard to tighten with everything on. the easiest way for me to really tighten is for me to take the gas tank off. oh well. i fixed it a redneck way xD

[kylebikesfit]

yeah thats how you tighten it take off gas tank lool. and you put a screw driver in ur freewheel because once spindle is tightened a lil freewheel moves so keep it from moving then proceed.

[rebelformetal]

naw this method is BS!! use my method: clamp the spindle with a wrench and tap the clamped wrench with a hammer. my method is better!! (use a wrench that locks up not a cresent wrench!)

[shareeverytrhing999]

You fucking tosser

[mop6wewe]

I don't understand a torque 43 you said lol and use a screw driver and jam it in the fly wheel you sped not a fucking rag

[maxwellwrestler92]

you use an allen wrench. all you have to to is look in there i couldnt figure out how to pop it off.

[mop6wewe]

I WAS BEING A WISE ASS

[mxboarder222]

mine wolnt come off i tries for ever and my dad couldent get it hes a mechanic

[salvador258]

when i turn my goped on, the wheel automatically starts turning . how can i make it so it wont do that until i hit throttle

[BadIdeas101]

put a clutch in it

[shareeverytrhing999]

upload a video of you putting a clutch in a goped sport.

[ambergerftriley]

they have centrifugul clutches for the sports.

[yamahonkawazuki]

@ambergerftriley depends. hte old sports are direct drive. im sure hte new ones are too. very few sports are clutched.

[shareeverytrhing999]

you can never do that with this type of goped. It's always in it's 1 gear. ha ha, I bet you have trouble getting on it when you start it don't you....ha ha ha , sell it!

[twistedf3ar]

you can always do a push start lol not that hard

[Golden9512]

what tool is that i cant understand what u are saying

[mxboarder222]

a torque 30 adn normas screwdriver

[GopedMasterz]

hey is there a way u can replace a spindle i want to buy a 850 on my goped but i dont want to take everything apart (the motor)

[xEcho419x]

just tank the gas tank off, unscrew the spindle. then follow the video.

[isarogo2008]

hey i need to quit my bigfoot spindle but i live in costa rica do you explain me please

[walyd5]

the spindle is attached straight onto the crankshaft right? so all u need is a bolt going through the spindle and into the crank shaft thread? this is question? im not entirely sure can someone confirm for me plz

[xEcho419x]

Yeah it's just the bolt that holds the spindle on.

[walyd5]

thanks for that so a goped is direct drive no clutch ok thanks for that

[PeteR111893]

hey instead of taking off the pull start use a piston stopper so the flywheel won't move.

[tjb8391]

that is an engine of the s25 right?

[Zak424]

.725 The same one I use in the video

[L34HL053R]

dude wat is a good spindle for top speed but with acceleration