Gamer Props Episode 2: AC Hidden Blade w/ Vambrace Part 1

[XXsarahcidalXX]

by far the absolute best video i've found for making the hidden blade and vambrace :D

[stonerzombiechick95]

came here because of funnyjunk stayed because your awesome :)

[OrangeSpy121]

@stonerzombiechick95 Thanks you :D

[FusRoDah111]

this is sweet one of the best hidden blades on youtube 

[zondafpapa]

is it just me or are the links in videos on youtube not working?

[eziohiddenblade1]

where to get fake blade?

[eziohiddenblade1]

thanks sooooooooo much!!!i have been looking for a vid like this for so long!

[BeatBladersTeam]

make the Prototype weapons that Alex Mercer uses. (Actually, just make the giant sword.

[gustavo1813]

Did you use a real knife or is that knife like plastic?

[100prototype]

intro song?

[OrangeSpy121]

@100prototype where is my mind (8 bit remix)

[100prototype]

@OrangeSpy121 thanks dude

[TheKcyankees]

YOU MY GOOD SIR ARE AN AWESOME BADASS PERSON

I THUMBED YOUR POST ON fj

liked this

faved both

and subbed both

[maximus197619]

FunnyJunk sent me here

[DJChrissyChris100]

@maximus197619 Me too.

[Ivan2522000]

would you sell it...:trollface:

[diablohorer]

whats the length of the string after i make all the necessarily cuts?

[OrangeSpy121]

@diablohorer the string should reach the bottom of the blade up to your ring finger

[diablohorer]

what's the length of the slide, its width its size?

[diablohorer]

what should be the length of the string after i make all the cuts?

[diablohorer]

i have a question?

if friction stops the blade from coming out unless i pull it right?

then how is the blade supposed to go back inside when i lift my arm?

[OrangeSpy121]

@diablohorer the momentum of the slide pushes it all the way back

[biomanoray]

25 minutes and 1 combat boot later....lolz

[biomanoray]

RITS are awesome!!!!!!

[part101475]

where can i buy the keyborad slide

[xAgeOfAquarius]

IS THAT A REMIX OF WHERE IS MY MIND BY THE PIXIES!?!?!?!?!?!? IF SO I FUCKING LOVE YOU!!!!!!

[Liamnator1005]

with the blade extended can it remain out when blade is in air without the blade falling back in slide

[longlax]

can anypone tell me where to get a fake blade like that



[longlax]

where did you get the blade

[MAXSCATENATO]

:-O WOWOWOWOWOWOWOWOWOWOW

[RiZeuPls]

Are you selling hidden blades? Oh but i guess you can not send them via mail so nah :(

[energysword123]

very cool i might make 1. Do u know how long it takes 2 make 1?

[bountyuhunter738]

is that links sling shot from zelda at 9:33

[goffymew56]

how long is the draw slide my pop is getting me one andi need measurements

[OrangeSpy121]

@goffymew56 use your forearm to measure it

[williamscorn4]

I made my own before I found this video. But I have problems with it staying out. Also how can it self retract itself?

[goffymew56]

what one is it i went on the drawer slides website what one do i need

•heavy duty drawer slides

•ball bearing drawer slides

•full extension drawer slides

•plastic drawer slides

•roller drawer slides

[OrangeSpy121]

@goffymew56 ball bearings, but any one would work

[goffymew56]

can you tell us what parts u cut of

[goffymew56]

the template wont print-_-

[OrangeSpy121]

@goffymew56 hmmm :/ idk why it wont, unless your were printing it just to get a better loom theres no point the template isn't the right size anyways

[assassinsduty360]

when you said we have to have 2 bent metal pieces we epoxy it, are you referring to the metal pieces we cut of in the begining of the keyboard slide? the spare parts you didn't use. and what happens when you put the "fake blade" in the hidden thingy, what happens if the "knife" is to big?

[OrangeSpy121]

@assassinsduty360 Yes and you'll have to take it out and shorten it

[assassinsduty360]

when you said we have to have 2 bent metal pieces we epoxy it, are you referring to the metal pieces we cut of in the begining of the keyboard slide? the spare parts you didn't use

[TheKrackens]

whats the name of the song? i really like it.

[OrangeSpy121]

@TheKrackens where is my mind (8-bit)

[AndiePhoon]

Can't wait to make it, freakin' awesome!

[SEANtheCommercialGuy]

real blade or fake....ill go real



[rbttr]

you have got best hidden blade,waht i seen,but i dont understand blocking mechanism :-P

[assassinsduty360]

How the hell did u make it? u rock! and one question. if i made it and i like u said if i put my hand up the blade will slide down, what if i keep on pulling on the string? will it stay up?

[OrangeSpy121]

@assassinsduty360 no the string is way to slack after you pull it out, the only time its snug is when the blade is in

[wowmandem123]

this is brilliant, going to have ago at making this soon! any easy way to get the keyboard slide?

[NiNjAxOpZ]

i am getting the materials and doing this this week

[Xhero76]

@ghostsnappa what tools did you use to make it?

[gamma992]

OMFG i've always wanted to make these props its gonna be sweet

[KenAndEthan]

How long is the slide that you used?

[OrangeSpy121]

@KenAndEthan To be honest I dont know, but remember I Cut it to the size of my forearm

[goffymew56]

@OrangeSpy121 hey orangespy can you help me in australia adelaide we dont have dose draw slide can you help thx o yea im a big fan of assassin's creed

-goffymew56

[OrangeSpy121]

@goffymew56 try drawer slides

[OrangeSpy121]

@JaliceHale68 YEAHHH!!!!

[Colzer1998]

Omg this is fucking amazing totally going to make this I'm subscribing you! You rock man

[keysord11]

are those real blades



[KingFluffs]

Totally going to make this.

[halomaniac15]

lol nice dollarama knife

[AbilNurBai]

do you real assassin????

[AbilNurBai]

nice shirt dude

[ghostnappa32]

i just skiped the vambrace and attached some realy small belts it doesnt look as nice but you can hide it inside a sweatshirt so people cant even see it

[OrangeSpy121]

@ghostnappa32 Be very careful! if seen by the wrong person it can lead to a lot of trouble!

[ghostnappa32]

@OrangeSpy121 its alright i made a plastic one afterwords and i only bring that one outside

[polodub23]

does it need to be epoxy?

[OrangeSpy121]

@polodub23 haha no, but I found it to work the best, you can buy some at the dollar store

[polodub23]

What do you mean by the keyboard slide? is it basically from a sliding droor

[OrangeSpy121]

@polodub23 some computer desks have a keyboard table that "slides out" its basiclly the same thing in some drawers

[polodub23]

@OrangeSpy121 alright thanks

[BlackWhitePaint]

you look abit like altair

[DrewTheSkier]

dude, im impressed. (srs)

[omgI15m]

Awesome tutorial. Im building one of these now.

I thought of a way to not only make the blade lock when it is out, but also retract it when you pull your palm in. On the slide the blade is connected to, try slightly widening the track at the bottom, so the bearing slide stops and locks due to friction.

[omgI15m]

@omgI15m

To retract the blade, tie another wire leader to the ring, then put some sort of bracelet with an O-ring in it around your bicep, lead the wire under the vambrace, thru the bracelet, and attach it to the bottom of the blade slide.

That way, you can just jerk your arm down while pulling your palm in to retract the blade. It may not be 100% accurate to the game, but it is fully functional, theoretically.

[omgI15m]

@omgI15m

If I'm not making sense right now, just message me and ill explain it more in detail.

[naulty3500]

oh yeah bro, that "thing" on a leader is a swivel.. haha

[delta6100]

Lol great blade, in my Zelda parody I might have link find one in a chest and then the assassin from the first assassins creed comes and goes " hey grass ass, that's mine" then they'll

[delta6100]

A man walks for a while orange is standing there his blades are ready and he strikes ouch man that hurts like fucking HELL

[Asemco]

If you've never used Epox---

THEN WHAT!? T_T

PS: THIS IS EPIC.

[OrangeSpy121]

@Asemco sorry about that my editing system is off and doesnt always cut where I want it

[pikmin4000]

You're AMAZING!

[skypirateprincess]

Dude, you are AWESOME