Added: 3 years ago
From: mcorrade
Views: 33,749
Sort by time | Sort by thread (beta)

Link to this comment:

Share to:
see all

All Comments (46)

Sign In or Sign Up now to post a comment!
  • Just a thought: If you put a little generator (or dynamo) on top of the rotor, cant you get out more electrical power than you put in? because the rotation is caused by both your powersupply and the magnetic force.. Well, please answer me on this thought :D

  • @fritszol No! it wont make more electricity then it consumes. Its a motor. duh.

  • Another experiment on youtube shows how to draw 4.5 volts from the air waves coming from your local radio station broadcasting antena.I used a crystal radio to listen to AM broadcasting. Can the combination (Air Power generator) and the magnet engine work together? You would not have to use a power source and the unit would run forever.This would make a great science fair project!

  • Hi, thanks for the video upload, i have a question, how many ampère is the electromagnet at 5 volts?

  • Mcorrade

    could you give us more detail about the diagram of pulse circuit?

  • @goegoen3112 The pulse motor is a basic bedini circuit. If you look it up here on the tube there are several "how too" videos on making a bedini. 

  • @goegoen3112 i have an idea and its nowhere to be found on internet lol

    I thought there was real over unity.. Ive only seen one out of all the suckers that has a chance.

    its so simple you all make it more complex than it needs be

  • mcorrade

    Nice machine.

    Could I use your machine as My doughter thesis?

  • Free energy can change the world!But there are very powerfull forces that want to supress the technology,Get the blueprints for a real Magnet motor free enegy machine at LT-MAGNET-MOTORdotCOM ,Let the revolution begin!

  • you should build about 20 of these on top of each other to increase power output

  • Free Energy is real and its here! The Oil companies are doing everything in their power to stop these information. If you want a Free energy machine do a search in youtube for the LT MAGNET MOTOR , Join the revolution!

  • I have a question, because my english is to bad to understand what you say in the video. Does the Motor work/turning around without energie?

  • @bluesisk no the rotor turns using the Bedini circuit through the coil. Read about pulse motors and that will give you the basic idea.

    thanks

    -mike

  • nice machine. of course i know magnets are real. lol but sometimes you have say the most obsurd things on here to stand out from the rest. just trollin in good spirits. have a nice day

  • @MediaMisDirected wow you had me. I thought I had a real live one lololol

  • @mcorrade lmao@magnets are a gov. conspiracy. wtf

  • fake

  • @MediaMisDirected People like you give the human race a black eye when it comes to intelligence. Look up Bedini, Newman, and then look up school, find a good one and go.

  • @mcorrade why does it gotta be a "black" eye? you racist bastard. and bedini and newman are all fake. theres no such thing as magnets. its all a myth, a gov. conspiracy. magnets are not real

  • @MediaMisDirected ....ROTFL...........lololol...­...your kidding right? Magnets aren't real?

    Please tell me more

  • @mcorrade chemtrails,9/11, and lhc all done by aliens from my butthole.

  • Why is it we can take a human heart out and work on it, do face transplants, hand transplants, send people to the moon and bring them back, but we can't build a magnetic powered car that really works efficiently. Somethings wrong with this picture here.

  • nice,great work

    i like reliable technical man like you,

    kindly visit the glotoniok

    watc the video d1,observe

    watch the ''abs safety gadget,

    and the dual jet tig

    i need advice from the expert like you.

  • if you attach a wire to the coal will it make electricity???

    i would like to see that

  • is it free energy?

  • hey i was trying to build something similar myself. i understand how all the components work BUT i do not fully understand how this "bendini" thingy works lol. Like how does the bendini coil move the rotor?

  • well there's plenty of "how too" on bedini circuits and there really simple. Just search bedini and you'll find it.

    mike

  • will this motor work under a load?

  • so the point of this experiment is??

  • this guy is not a genius is he

  • what is the matrix..

  • ok ? you made it spin so now what ?

  • now what? Nothing that's what. It's a pulse motor.

  • Hi, Nice Work.

    Now suppose you replaced the drive shaft of the rotor with a small inexpensive 12 volt motor/generator. Surplus stores sell them or Ebay. Connect the output voltage of the 12 volt generator directly to the air core coil.

    If the motor keeps running you have acheived overunity and now have a self runner.

    The next test would be to see how much of a load you could put on it before it stops running. Thats down the road.

  • Nope, this is just a simple pulse motor and it is impossible to make a self-running motor.

  • I really don't need anyone answering my questions for me. I'm fully qualified to tell energyscience that this is a very large pulse motor with potential !!!!

  • Do you agree that without the spiral of magnets it would run just as well, in fact essentially the same?

    It would be nice to see the motor do work and you measure the power consumption. Just a thought.

  • no I don't agree and I have done that test several times and the spiral does help the system and in some tests the rotor would run twice as fast due to the spiral magnets.

    Anyone can clearly see that the rotor will move by itself within the spiral until it hits the gate which at that point the any gain is lost. But I recently changed the spiral where the gain is greater than the loss from the gate. This DOES NOT mean I now have a self runner, just better performance. This is old news, catch up

  • I will look at some of your other clips. With respect to the gate and all of that, with the magnet spiral only and no pulsing coil, the spiral of magnets will give you a net zero energy gain.

    At the same time I have no doubt that the rotor can turn twice as fast when the magnets are in place vs. not in place. The challenge is to explain why that is happening since the magnets are giving you nothing....

  • I believe I just said all that? And I don't know why it moves by it's self for s very short time other than magnets doing what magnets do.

    It's certainly clear to everyone who has done any of these experiments that you can get a rotor to move ALL by itself for 95% of the full rotation until it hits the end gate. It's at that point where the external energy is needed to fulfill a full rotation.

  • A way that you can look at is that as the rotor turns the magnet at the end of the arm is getting closer to a 'single' magnet (in reality the spiral of magnets) and the attraction of the 'single' magnet is the force that moves the arm 'closer' (in reality the rotation of the arm) to the 'single' magnet.

    The speed of the rotating arm increases until the energy supplied by the pulse equals the energy lost to friction. Everything balances out when the arm reaches it max rotational speed.

  • When the spiral of magnets are in place, it sets up a new balancing point. The arm ends up rotating faster, therefore you are getting more pulses per second, which means that you have more average power going into the system. The higher average power is balanced out by the increased friction do to the higher rotational speed.

    Systems like these can sometimes have multiple operating points where everything is in balance. Just my two bits!

  • does it self run?

  • i haf seen amotor like this, does it gives more electric power out than in coz itz got extra power from magnets and its being run by a motor.

  • Actually the spiral of magnets are energy-neutral. The motor would run just fine without the spiral of magnets. The spiral of magnets is just eye-candy to make things look more interesting.

  • Very nice, good work, good luck with self running.

  • thanks and I'll need it (luck that is)

  • Its spin fast at the end! Nice replication.

    I bet with a flywheel, you will get even better result!

  • thanks and yes thought about a fly wheel and was pondering a fly wheel/generator combination..

  • Fantastic man!!! incredibe!!:)

  • That looks great Go with what works.

    if attraction mode is how it works best stay with it. it really moves. looks awesome on the Video.

  • thanks Rod....I'm now going for the real deal and make it work using just another magnet in a solenoid like fashion (like yours) and from there, try and get a self runner...no wires ;-}

  • Very nice job!

  • thanks

Loading...
0 / 00Unsaved Playlist Return to active list
    1. Your queue is empty. Add videos to your queue using this button:
      or sign in to load a different list.
    Loading...Loading...Saving...
    • Clear all videos from this list
    • Learn more