CHEAP AULDEY RACE-TIN MODIFIED byJCSIA

[propflyer1]

Nice !

[MrLEMON52]

what did you do to lock the differential and where do you buy parts

[unit2135532]

hey i got mine in the philippines too but my motor is busted.....

if anyone has any idea to get a new motor IN america (cuz im in it) plz tell me!!!!!

[toxifiedblood]

So instead, I just bought the Kyosho Mini Z Monster (R/C from which Auldey copied the Ranger X)

[toxifiedblood]

I got two before, but fried both of it's board when I installed an atomic tuned motor from Tamiya.

[albertobassig]

dude we got the same AULDEY RACE-TIN WILD RANGER X

[brokenarrowarmy]

My mini monster is a 8 cell......modded board beast...has mud paddles,30k motor,front ball bearings,custom ford body,20-25mph top speed....also can burnout on cement or black top.....plus does wheelies

[markthe300]

hehe i have a jeep like that

i modded mine with mini z parts

[traxxasboy101]

hey i was wondering if you could tell me were you bought your wheely king parts here in the phil bec im ordering one and i dont know wer to buy upgrades for it. .

[tontos14]

nice song

[RODANGELA]

can we snap in new motor into Gen 3 without soldering involve?? i mean, like we can do to tamiya mini 4WD..??? and what is the function of soldering a brown transistor to the dynamo???

[djlander]

Great, now buy a nice camera...

[princecaspian101]

did you changed your motor?cool vid man.

[painter107]

it runs on stock motor. thanks man\

[Luigi70000]

where do you get those

[painter107]

got mine in Philippines

[smutoys]

Hey cool! I got a couple of the WIld Ranger X trucks while I was in the Philippines (actually, I got four of them, but sold two). They're pretty fun, although I never thought of modding them, just for playing around with.

[crushednipples]

hey dudes!!! watch "Auldey Super mini monster 2" !!

[11182000]

Great Job, Nice and simple! But Great!! 2 thumbs up.ill try your mod on my tin mt.

my mod so far,?! LED lights tap on the motor wire, easy mod. thought you should try it on your mt. thanks

[11182000]

have you added extra batteries on it?

and relay?

[painter107]

no batteries and relay added.

[crushednipples]

wait 4 my super modified wild ranger vio!!!hehehe..........!

[zackunderscorefalcon]

Philippines... Cool... Any chance you could show a vid of how the modifications were made?

And how's the gearing? Did you modify anything? The gears were tuned for speed (2 gears to the previous Race Tin's 3), so I didn't expect it to go off road. Unless you changed the motor.

[carrotorangeshake]

bro could you show s the thing without the body. that would be really nice :)

[deejayengen]

mannn thats sick!.. i want that for christmas haha

[MaiVampireRenesmee]

u shd make a how to modify video for the truck.

[elgh33]

Hi, i have almost the same mods but i am not sure how to lock the diffs plz help.

[mycreatedanimosity91]

how did u modified it?? i thought I want to buy 1

[painter107]

Hi,

lock the diff by putting a super glue on the wheel gear. change the spring board to a softer and narrower board for a softer suspension.

as for the body, i just made some simple brackets to accomodate the hummer body.

[mycreatedanimosity91]

thx dude..

[anuarpiee]

aluminium spray are it longer lasting for that paint

[painter107]

mine is still in good shade so far.

[7654321asdq]

Could u tell how/what to glue/lock of the diff.?

[painter107]

Open the diff to reveal the gears, then put a superglue on the gears, close the diff and reinforce it with a piece of thin hard plastic and cut it into circular shape and glue it on top of the rotating diff, then the wheel back on. that's how i lock my diffs.

[anuarpiee]

how do you colour that rim and hummer body that from mini z right

[painter107]

alumninum spray paint for the rims. the body is from cheap china toy. just modify it to fit the chasis.

[dote21]

is it four wheel drive?

[painter107]

two wheel drive only, i just lock the diff at the rear

[matbulem]

Mine is posted in flickr, u can search under mini monster truck

[painter107]

ok i'll watch it. thanks

[matbulem]

I have one too, modified with acoms radio and MtronicsESC

[arcolargo]

muy bueno, esta currao, ok

[RacerzGTR]

lol mini-z monster style suspensions

[liberalman05]

PANGET MO

[razor53626]

how to make the suspensions softer???

[painter107]

make a thinner spring board, and replace the original one.

[WATANABEB05]

who know how to put relays on this mini truck??? i have 3 truck like this...i want put relays...plz some1 make another video how to put relays and add batteries

[WATANABEB05]

did u using relays in ur circuit?? can u make 1 video how to put the relays??? i have 3 this truck....but its very slow...plz...help me...make another video for put relays

[painter107]

hi, no relays has been added, its all original including the motor.

[WATANABEB05]

so its not modified???

[painter107]

sorry, what i mean is for the speed, its the original motor and circuit, no relays, my modifications are simple, change of body, longer and softer suspension, and differential lock. as for the motors and circuit, no mods has been done.

[ku2bragas]

how do you lock the differential? modelling clay?

[painter107]

superglue and reinforce it with hard thin plasic

[7654321asdq]

Is reinforcing with plastic "must-do" thing?

[painter107]

not really. but doing it will be much more durable.

[7654321asdq]

Ok, thanks. Do u know can i use tape or just separate the gears from themselves? If u dont know ill just try something. Cus i would like to lock it permanently.

[7654321asdq]

i mean i would NOT like to lock it permanently

[kancilbelang]

Nice work. Did u cut some part of the spring board? since it can take any surface by bending its springboard

[painter107]

Thanks! i replaced thinner sboard and narrower in shape. so that i could still use the original sboard if i want to.

[sybilmalicsi]

the neo magnets..i bought it years ago, tamiya days?remember?..

[sybilmalicsi]

i think you should put relays...im finishing my gen3 right now..im having trouble finding lithium polymer batteries ill post vids as soon as i finished it, bout the plasma dash, i have an old plasma dash it doesnt run like it was before ive tried to put wd40 on the brushes it doesnt work what do you think is the prob?

[kancilbelang]

need to change the brushes. It will solve the prob mate.Overuse brushes will slow down the motor.

[sybilmalicsi]

ah its 130 class motor,if you want a lot of torque and some speed on your rx try to use hyperdash2 armature and neo magnets combination

[painter107]

ok thanks! i changed the motor to plasma dash, the the circuit board heats up then die, some capacitors are burned. i'll try to change those burned capacitors. maybe the circuit is not capable of running the plasma dash motor. i don't have a hyperdash2, but the i have atomic. i'll try it on. where can i get the neo magnets? thanks! do you have vids of your rc?

[BURNINGPC]

bro, what material did you use for the custom spring board? cud we use any plastic like covers for the milk cans? with regards to the softer/longer spring you used, were did you got it? tks n advance.

[painter107]

i used the plastic of a transparent mouse pad. yes you can use that milk can cover. if it is too soft that it will sway, then double it or find a thicker plastic.

[sybilmalicsi]

what kind of motor ranger x used? 130 class?

[painter107]

si'm not sure about motors. the one i'm using is stock motor. it is the same as tamiya mini-4wd motors.

[megu824]

Who's legs at 1:12?????

[GANSTAPUNK]

i got a 5v 10A relay in it,the speed was up 30% but it dosend work well when its turning corners while accelerating cuz both the the steering motor and the propulsion one are working to lower the voltage quite a lot,maybe a 3v relay is the best choice,since its not in good shape then i will post a video later .if u like it as a crawling buggy maybe u should get in a thulium magnet in the motor

[painter107]

ok i'll research about the thulium magnet. you mean by changing the magnet will make it slower and a stronger torque? or just slow with the same torque?

Thanks!

[GANSTAPUNK]

yea of corse it will increase the torque and not really slow down the rpms vice versa,a thulium magnet can maximize the efficency of a dc motor,and auldey comes with some kinds of optional thulium magnet along with mini 4wd products in china since they are both common in the use of 130 searis micro motor

[painter107]

ok thanks for the info.

[GANSTAPUNK]

looking mad in the hummer chasis,i'm in china ,auldey named it micro madness not wild ranger x,i gonna plan to make some relay mods and put the voltage to 7-8v ,i duno if the 130 searis micro motor can stand at that high voltage and wear out the gears ?with 8 volts of electcic supply it can runs 20 miles with no problem?

[painter107]

ok, in philippines it was wild ranger x. i havent tried the relay mods yet, i'm planning to make this slow like a crawler, don't like it to be fast, i'm trying to find a servo motor. very rare in here. do you have vids for your micro madness? want to see it maybe its a new released. great plan of modification you have plan.

[DriftDemonKing]

why exactly is this vid in XMODS category?

[wwwcuztomdk]

Cool work! First Auldey Race-tin Wild Ranger X, modification I have seen.. Drake / Denmark

[damnation1928]

Wow holly great balls of fire!!Cool nice wheels you got there! great modifications. :)

Rhatma Gublatim-Pakistan

[einnoceam]

wow,that's cool.the best part was at 1:16.love those "hardcore ironing action" at the background..that was totally priceless...this isa "RARE" footage...WOWWOWEEWAHH