T-Mobile myTouch HTC Dream Magic Digitizer Replacement

[fatehhbir]

Thanks a ton mate

[firerzero]

hi my friend touch g3 his top glass is broken .the LCD and the digitizer working fine it just the glasses on the top how i can change it?

[imacakemonsta]

It'd be cool if you didn't skip steps.

[ronitgla]

thanks, just changed my screen, but it does need a better angle !

[nismogizmo]

@baydood i did but it did not go well. i had problems with the giro and digitizer glue. unless there is a vid to help you along i would not reccomend it. i did not end up fixing it i ended up using my insurance.

[iniwebdesign]

Worked great for my 'Mytouch' !! I have the first american edition of 32B without 3.5mm jack and the LCD I got off ebay worked and fit perfectly.

[MrModel909]

@iniwebdesign ,, ive tried looking for the mytouch 3g with no 3.5 mm jack housing ,, how u get urs ?

[haxate]

thank u very much!

[the18gearJammer]

Hey i have a mytouch 3g slide and recently the screen has been a little weird. First when i would slide out the keyboard the sreen would split so that the right half of the screen is on the left... But then it started to just stay dark but now it does it all the time i can see the screen but its so dark i have to use a flashlight to see it. Is the back light out Also, is the back light in the LCD so i just buy a new LCD? please respond Thanks

[yassllen]

thank you very much, i saved $100 by doing it myself :) just $31 for de lcd screen vs $150 for fixing it at a store or $125 to claim it to the insurance so thanks again i used a blower to separate the screens and it worked :)

[ArchieFan42192]

@yassllen Was it hard? I just ordered the part, and I'm a little scared because this is the very first time I've done something like this. The downgrade must of killed the touch screen or something, because the touch screen is no longer working and it's brand new.

[nismogizmo]

are there any specific videos for digitizer replacement on the MYtouch 4g?

[baydood510]

@nismogizmo did you replace the screen? my mt4g screen just broke as well

[pablosbpa]

How can I repair the trackball ??

[xpecial557]

A word to the wise, I adapted this to the 3G Slide and I suspect most of it went ok, but when I started up the start-up noise was heard, but the screen was completely blank. I suspect I may have burnt some circuitry separating the digitizer from the cover. If doing it again, I would try to protect everything I'm not working on.

[zonda82]

excellent guide.. Touch Screen Digitizer replaced on my htc magic and works perfectly :)

[Shadaxv90]

around 5:10 you mention removing the sticker and putting it on the new one... is that important? my sticker got ruined.

[archfienduk]

@Shadaxv90 it might not help you know but I used a hair dryer and it was fine

[Headshot2142]

WOW! Thank you for that Video! Everything works fine again! :D

[timerunnerproduction]

hehehe.....i wanted to see you say "AW CRAP! i put the screen on unside-down" :(

[dessin1]

Do you think I could use a hair dryer instead of a heat gun, to seperate the LCD from the digitizer? Or is the glue too strong for that?

[wheresbillay]

Hi, I used this video as reference to change the housing for my MyTouch3G. Unfortunately, I had purchased a 32A housing (in other words, for HTC Magic). I was wondering if you could refer me to any online shop that actually sells a 32B or a 1.1 MyTouch3G (before the addition of the 3.5mm headphone jack), or if you have an online shop where I can purchase this from. Please get back to me, thank you. If anyone else knows, please let me know as well!

[techlab102]

@wheresbillay have you tried ebay?

[wheresbillay]

@techlab102 Yes, I tried ebay but most of them were only for the HTC Magic, not the MyTouch

[TheOneAndOnlyFink]

@wheresbillay cnn(dot)cn/shop/index.php The 32B housings come in black, white and red. Seeing as how this comment is seven months old, I'm assuming you've already found one, if not, I hope this helps.

[seandelevany]

Thanks for the video. It would have been a little bit more helpful if the angle of the video was looking down. this would have helped to see more clearly.

Either way, it is obvious you know what you are doing and I have a feeling you will be receiving my broken MyTouch which I haven't even finished paying for,

[techlab102]

@seandelevany hahahahah....sorry for the deed. yes thanks for watching and your suggestion of the angle. have been experimenting on a few different takes to make the upcoming videos easier to follow. will be posting a HTC HD2 tutorial soon.

[swim4thefunofit]

Awesome video thanks SO much for your help! Replaced broked LCD screen.(Not broken digitizer... video still applicable) Worked PERFECT!!!

[vincyjay]

so if i get this right... the screen consists of a digitizer and a lcd screen... so if both are broken then both will need to be replaced? is this correct?

[techlab102]

@vincyjay yes both need to be replaced.

[vincyjay]

@techlab102 thanks... I was afraid of that... It might be easier and cheaper to buy a G1 for parts and replace the entire front face.

[Extremmist]

I have some questions regarding HTC Touch HD; can be the digitizer replaced without replacing/damaging the LCD screen? How is the digitizer attached to the LCD screen? If somebody tried to replace the digitizer and broke the LCD screen, what was probably done wrong?

[techlab102]

no prob....thanks for watch. stay tuned for more tips and tricks.

[abarro2]

THANKS! your an angel! hahahah saved my mobile! Hope you get as many clients as you deserve at your shop!

[shuaibA0]

great vid , THE ONLY HTC MAGIC DISSASEMBLY VID I HAVE SEEN :D

[techlab102]

thanks for the comment, will be shooting our next videos at a higher vintage point.

[KillaRaznia]

This Video Is Very Good But We Can't See Wahat You Are Doing From This View Maybe A More Overhead View will Help