How To Install Replace Fog Driving Light Dodge Durango Dakota 97-00 1AAuto.com

[dega4amp]

Could you guys possibly do a replacement video of the fog light lamp on a 2001 Dakota. I looked at mine and I see only 2 torque screws on the back of the lamp with what I believe is the adjusting screw on the front. So could you guys find a 2001 Dakota with foglights and do a replacement video on replace the lamps(I know how to change the bulb not the lamp)

[1aauto]

@dega4amp We'll keep this in mind if we end up with a 2001 in the shop. Thank you for checking out our auto repair videos.

[ohyeamain]

Do you by chance know which fuse is for the fog lights on a 99 Dakota? I checked the relay under the hood... It's fine, I have a Haynes manual and it tells me where the fuses are but doesn't help at all... Both of my fog lights went out last night at the same time. Thanks for any help.

[1aauto]

@ohyeamain On the backside of the fuse cover there should be a diagram that shows you which fuse it is. You may also want to check the switch for the fog lights to see if it's working properly. With a test light check to see if there's power coming to and from the switch. Another thing to look out for too is, see if the plug on the backside of the switch has heated up and gone bad. Hope this helps.

[dega4amp]

Would this also work on a 2001 dodge Dakota because that's what I have

[1aauto]

@dega4amp The 2001 should be a similar process.

[jonashbee]

are those two 10mm holes that hold the light on, already there or would they have to be drilled to mount the stock fog lights

[1aauto]

@jonashbee Not sure, our truck had fog lights originally. The bolts are 10mm, the holes are smaller, 3-5 mm.