@lestube001 did you have trouble removing the transit bolts?
i just got a new hotpoint hv6l105p and the instructions for removing the transit bolts were horrendous!
the plastic spacers were behind the back plate and i dident know if you had to remove it or not, long story short the plastic spacers fell to the bottom of the machine when i slid it into place
hello, the first wash on a washing machine should always be held at the hottest temperature the machine has, on which case yours in 90c i think. if not you should definaately do it now because the machine wont be washing the washing properly. cheers.
@lestube001 Mine's under the sink too, could you film the Express 15 for me please with the temputure regulater at 40c, i'm so cirious to see if it actually wwashes in 15mins at 40!
@Sofrotum actully no it only goes to 30 my nan has this and if u put a full load in on this cycle as my nan does it take aboutn half an hour to 40 mins
This is not unboxing, it wasn't boxed. Do you have invisible clothes? Lastly, why post a video about UNWRAPPING a washing machine? :S
easyworship 1 month ago
On the first ever wash you are supposed to do a 90 degree program. What temp do u normally use for the clothes?
blakaeg 3 months ago 2
WHY DOES EVERY ONE USE 30!!!!!!!!!!!!!!
Nextra6 3 months ago 2
@Nextra6 i don't. I always did 50degress but now got a Zanussi can only do 40 or 60. I prefer a hotter wash.
blakaeg 2 months ago
whyd i watch this !
MrRideutah 4 months ago
@MrRideutah cus you care
lestube001 4 months ago
@lestube001 Are you satisfied with this machine???
bogdannb 4 months ago
@bogdannb works fine thanks
lestube001 4 months ago
Did you remoove the transit bolts?
nrones 9 months ago
@nrones yes
lestube001 9 months ago
@lestube001 did you have trouble removing the transit bolts?
i just got a new hotpoint hv6l105p and the instructions for removing the transit bolts were horrendous!
the plastic spacers were behind the back plate and i dident know if you had to remove it or not, long story short the plastic spacers fell to the bottom of the machine when i slid it into place
Sewcoolwash 1 week ago
How's the Indashit diong?
schemerzot 1 year ago
@schemerzot its not shit fuck you
marthalover4ever 2 months ago
@marthalover4ever yea it really is
ilovemiele1 2 weeks ago
@schemerzot I DONT KNOW WHY YOU HATE INDESIT!!!!!!! INDESIT IS GOOD AND CHEAP, AND INDESIT CAN WORKING WITHOUT PROBLEM IN ROOM WITHOUT MOISTURE
bogdannb 1 month ago
@bogdannb haha no theyre not.. they're terrible, crap and cheap and wont always work in any room!
ilovemiele1 2 weeks ago
@ilovemiele1 Ok ;) I am satisfied with my Indesit dryer very much ;))))
bogdannb 2 weeks ago
@fordsienec its an indesit?...
ilovemiele1 1 year ago
@ilovemiele1 which makes the whole thing worse since they dont wash properly anyway
ilovemiele1 2 months ago
hello, the first wash on a washing machine should always be held at the hottest temperature the machine has, on which case yours in 90c i think. if not you should definaately do it now because the machine wont be washing the washing properly. cheers.
ilovemiele1 1 year ago
who puts thier washing machine under thier sink
djcountry1985 1 year ago
@djcountry1985 Me !
lestube001 1 year ago
@lestube001 Mine's under the sink too, could you film the Express 15 for me please with the temputure regulater at 40c, i'm so cirious to see if it actually wwashes in 15mins at 40!
Thanks.
Sofrotum 1 year ago
@Sofrotum actully no it only goes to 30 my nan has this and if u put a full load in on this cycle as my nan does it take aboutn half an hour to 40 mins
marthalover4ever 10 months ago
@Sofrotum no it dosent the temp only goes to 30
marthalover4ever 2 months ago
@djcountry1985 who doesnt? :S
ilovemiele1 5 months ago
The first wash is supposed to be a hot wash, at least 60 degrees to rinse out the machine if manufacturing residue.
blakaeg 1 year ago
first ever washing machine apparatus UNBOXING on youtube!!!!
peterFans 1 year ago
you need to fix your broken tooth Haha
7numrat 1 year ago
washing machine unboxing lololol epic!!
keatonguy09 1 year ago