ECHO 1 M4 RIS Stag Arms Version review

[IBleedBlue2211]

Is it hard to get this battery in?

[IMsuperDUPERable]

Should I get an Echo 1 Stag Arms M4 with or without RIS?

[b18k4705]

you gay retard. you fake asss shit

[Lorentz101]

hey does the front R.I.S. wobble real bad or no?

[insanitystudio]

eh, for some reason i hate that external battery pack.

[Schamrok93]

hey, I see that you have the rail riser for the mounting of a scope... can you tell me if you can connect the rail on the upper receiver, to the rail of the hand guard using the riser? like can you put 1 pin from the riser on each of the rails?... if this doesnt make complete sense could you please personal message me???

[JsLA24]

I have the same gun and mine shoots 391 fps

[toby7toby]

have that gun

[ouzts12]

is this in any way better than the JG version? I had the identical looking one made by JG cuz it was cheaper and had more FPS. The only thing that was different was that there was a cranestock to fit a nunchuck battery instead of a PEQ battery box, so I thought that was nicer. Too bad it stopped working a few months after buying it...

[xXXairsoftrockerXXx]

lol that sucks

[Rorona550]

if anyone is interested i am selling the new version of this gun Never used ounce i bought it then i decided i didnt want anymore i payed 200 for it  selling for 170-180

[roguepb15]

I thought the Stag-Arms version was supposed to have a black body rather than the usual grey body. I have the version 3 of this gun and it looks identical.

[WantASubcribe]

How do you tighten the D Ring, and also is the front sight removable?

[nate2000111]

I HAVE one and the only thing i hate about it is the freekin sight it sucks

[GIJOdaddy]

be carefull when u buy from amazon may i recomend airsoft gi, agin just be careful when u buy from amazon

[badmintonho]

does the ris wobble if so how to fix?

[TheRockDude35]

you can use a magpul RAS fix, or tighten the Delta Ring (D-Ring)

[ZattMach]

Problem is, I dunno how to get the battery on the side.

[Dannyboylikespipes]

Does this gun have to have the battery on the outside?

[YaMom0]

dont blame the gun for a foregrip that might not be made for tgis gun

and if 8lbs is heavy...... then dont play airsoft because most guns are around that weight and you dont want to overstrain your muscles.

[SgtReviewer]

is this gun heavy cause if i buy it i dont wanna be complaining about how heavy it is

[death55546]

As heavy as the real thing, if you complain, high end airsoft guns like this aren't for you.

[ohmuhgurth]

i have held the real thing...they are actually lighter than their airsoft counterparts -.-

[death55546]

Depends on the material the gun is made out of. Some M4's come with reinforced plastic parts, etc. There many variants, it would be a pain in the ass to perfectly match the real life counterpart to the airsoft version.

[ohmuhgurth]

i have a JG m4...with the RIS system and it has all stock parts; i just found it funny that the real m4s weigh less ;)

[YaMom0]

its a realistic weight. it shouldnt be a problem.

[MasterChiefxyba]

does anyone know which way the flashider screw in ?

[gabem919]

i hate battery boxes and love ris systems could i put a small stick type battery in there and not use the battery box

[Rachymeow]

probably wont fit

[arapistonhalo]

hey guys will the standard acog4x like the one the army uses (trijicon 30mm 4x) have a clear sigh picture if mounted on the rail above the receiver? idk if the frotn sight assembly will get in the way. if anyone knows please tell me :o

[FreshAirsoftReviews]

if you're considering using an army acog4x then price is definitely not an issue and you could slap on a $10 RIS raiser.

[DontClickOurURL]

@arapistonhalo well in reality the front sight is in the line of veiw while looking thru the acog. line up the reticle with the front sight and you should be fine. :)

[supportourtroops2010]

@arapistonhalo youre dumb there is no need to buy a real trijicon acog sight. why would you spend $800+ on a sight for airsoft

[bhennessee01]

@arapistonhalo well a real trijicon costs more than about 900 bucks so you dont need to waste your money because it will not be accurate on an airsoft gun.

[haggman7]

Hey, i'm probably going to get the Leapers 40mm red dot scope(the one you did a review on), and i have the Echo 1 M4 SPC. So, do you think you could give me the link of where you got that riser mount that's on your rifle? Thanks.

[marinecamando]

is there any wobbleing on the parts

[arapistonhalo]

no wobble its a pretty sweet gun

[MoogleXMaple]

Where did you get the sight riser???

[benrking91]

Hey this looka like it has the dreaded grey plastic body is that so. because i have the Echo 1 stag arms m4 commando and to my suprise my have a flat black finish not grey.

[lilseuff]

nah the new versions have the black finish.

[1xXitachiXx1]

does anybody know what is so special about the"stag arms" brand on the reciever? does that mean it's higher quality or something?

[AbyssalHunt3r]

yeah

[USAF95]

ris it's R-I-S (Rail Interface System)

[usmcboy123]

is this good for a usmc loadout or do u suggest a m16a4

[FreshAirsoftReviews]

yea i'd reccomend it.

[DontClickOurURL]

@usmcboy123 no. the USMC does not use the M4A1. but, considering you made the comment a year ago its out of my hands

[TH3N3XTCP3]

Is the Plastic High Quality?

[FreshAirsoftReviews]

yea its sturdy plastic. not bad at all

[TH3N3XTCP3]

I can't decide between this and the JG M4 S-system. Can you help?

[UrbanMarine]

I'd get the Echo1. JG are a step down from Echo1.

[mangie222]

just a question: why did u put a high profile ris rail?

[Aaidas2]

He putted it on because the front sight gets into scope aim

[randomassbalaclava]

why not put on a front flip up sight?? looks better

[Aaidas2]

It comes like that with the normal sights

[randomassbalaclava]

flip ups are difrent than this one

[hello3241997]

What is the biggest battery I could fit into the PEQ box that comes with it?

[airsoftwarrior1]

how did u get it to have a prq nos is it hard i have a ics peq box and im geting this gun and im going to use my intellect 9.6 2000 mah will my peq fit?

[ContractedStudios]

SO is this gun worth it? Because we play in an CQB Office building and in airsoft warehouse (Made combined)

[Aaidas2]

Why is the body grey?

[bakyardbush762]

Its grey because its the version 2 model.

The box has also changed to a green box

[fredblink18287]

I had the same problem with my foregrip, I just filed it down a little...anyway I haven't seen a model like mine w/ the batteries INSIDE the buttstock, I got the fat one it has 7 batteries in the back.

[TheMajor117]

with airsoft, the laser is ideal for hip shots, or night shooting, depends on what you do, long range means no point for accessories like that, close quater means run and gun, you can find old vietnam era long m16's or even wwII tommy guns and such.

[spider25pig]

ya its great for grips, lasers, flahslights and if ur rich a grenade laucher too

[heavymetalhunter72]

It looks like a cheap piece of shit! Grow a pair of nuts, spend a couple hundred more dollars and buy the real fuckin' thing. You sorry douchebags.

[TOMMYGUY99]

is the front sight removable

[P3t3rN9uy3n]

yes it is

[KevLarGu]

its practical 2 mount ur crap

[rewindablender]

What I meant was-

Does the Rail Covers come with the gun?

[rewindablender]

Does the rail come with the gun?

[vanozzy24]

Dude, Nice Vid!

I got same gun!, Just full stock

Check Out My Review!

[sulaimann]

do you have to mount the battery in the PEQ2 box on the side or  can you put it inside the gun

[DSAairsoft]

where did you get that rail raiser thing.i cant find one anywere?

[KillerMikey24]

how do you take the top rail cover off? Its is very annoying

[FreshAirsoftReviews]

I have the same problem. With enough force I'm sure it would come off.

[Brettkix]

What you need to do is force it a little but if it feels like its going to break stop.

I will try to post a video ASAP

[J1mmyP4ge]

Are all the RIS rails on this gun metal?

[FreshAirsoftReviews]

yep

[mben456]

how much is shipping for any item in general from airsoftGI?

[FreshAirsoftReviews]

free over $100. I think under 100 it should be around $10-20.

[cumtomyh0use]

well its not free but it is lowered down to $2.50

[jweb1594]

where did u get the dovetail extention rail on the top sight mount?

[FreshAirsoftReviews]

I don't remember it was some random airsoft website I just googled something along the lines of "airsoft RIS raiser". I think it cost about $12-$15

[thevideoguy555]

what is JG's websites URL?

[killersquirrel122]

you should get a echo 1 m203 launcher

[FreshAirsoftReviews]

haha nah thats a waste of money its like $100.

[URM0MW4NT5MYJUNK]

ok thanks bro!but first i have to customize my echo1 (vector arms) and god knos how long thts gunna take.....

[AGreer34]

airsoft guy 44...you can take off the flip sights very easily.

[URM0MW4NT5MYJUNK]

my dad got this gun........thinkin about customizing it got any ideas?!?!?!?!thanks to any1 who anwers

[airsoftguy44]

do you know if it has a polycarb tappet plate?

[rawnMcDeezy]

Can you remove the flip-up sight?

[Wolfeater818]

for all you people who complain about the wobble of the ris....

1. almost all m4 ris aisoft guns' ris rails wobble.

2. if you dont want the wobble, dont take off the rails; the wobble on most m4 ris is caused by people taking off the bottom part of the rail to connect the batery, just grap some tweezers and pull the connection out through the holes.

3. i had a third but forgot it.

[lilseuff]

is the gun balanced well meaning is it front heavy at all?

[FreshAirsoftReviews]

yea its a bit front heavy since the PEQ box, battery and metal RIS system are all in the front.

[OhDoggy01]

Woooah there. I do NOT see any Stag Arms Trades on there, and that is not the box that version comes in (2008 model). I have that model sitting in my hands right now. Unless I am completely blind and ignorant, that isn't the '08 (Stag Arms) model. Also, for the foregrips: Mine were too, but I eventually found one that fit fine. I think it would be beneficial to post an update for this rifle about 5 months later or so to see what has happened, as the RIS unit usually becomes VERY loose. Good job.

[OhDoggy01]

And I read that they fixed it up nicely, but it most likely will come loose again, sadly. Anyways, very nice job and very though. One of the best, quality [video] reviews I have seen in a while.

[FreshAirsoftReviews]

the trades are on there it is the stag arms version if you pause at 0:38 you can see the logo I just didn't specifically show them in the video. Not sure if its the '08 model I bought it in like April of 08

[OhDoggy01]

Ah, gotcha on the trades. Funny though how the box is different... you do have the '08 model. Weird though how they gave you an '07 box. Oh well. Thanks.

[bcw3360]

Ok you seem quite knowledgeable on the subject of airsoft so perhaps you could help me out? I noticed on evike they have this gun in the boneyard- I already have a tm M733 with an m4 upper receiver. An ris system alone costs 50$, and with the entire boneyard gun costing 80, do you think I should go for it? I could simply replace the entire front end with the m4 front end and have an ris. An opinion, please?

[FreshAirsoftReviews]

Yea that sounds like a good idea considering that for an extra $30 you can get some spare parts incase something inside your gearbox breaks along with the body.

[CaveMan1308]

alright well thanks dude =)

[CaveMan1308]

well thanks dude cause im actually getting a jg m4 stubby killer now =)

[FreshAirsoftReviews]

No problem. Not sure if you're going to run into problems with the jg but who knows. If you wanted to get the echo 1 m4 an easy and cheap fix for the wobble would be to buy a rail raiser like I bought for around $10-15 and that should get rid of most of the wobble if you connect the top rails in the back to the front rails.

[CaveMan1308]

hey dude nice vid but is the ris handguard wobbly???

[FreshAirsoftReviews]

When I got it it was kind of wobbly, definitely enough to annoy me, but I took it to get fixed at an airsoft place and they tightened it up pretty well.

[zbranger]

can you put the battery box on different parts of the RIS

[FreshAirsoftReviews]

Yep you can put it on whatever rail you want.

[LiToTonyy]

u can take it off but the battery wont fit in the gun itself

[loritolbert]

can u take the huge box on the left side of the gun off with the wires not sticking out??

[FreshAirsoftReviews]

well if you really wanted to you could buy a crane stock and rewire the battery to the stock but it would take some work.

[RJuchiha]

first comment woot woot! it looks awesome with a silencer and cqb scope