@goxsv would i be in good shape if i use a 8.4v 4200 mah battery, and would this happen with this battry a systema energy motor short type and a m120 spring?
no its actually comparable to kwa in my opinion but the kwa motor has more torque than speed and vis virsa for the G&G but G&G has better internals (i.e. poly piston and head with that crazy nice o-ring and light gear setup) while externally the kwa is no doubt better and rock solid. while the g&g is still good, imo kwa is better externally. Overall though I would highly recommend both depending on what your looking for/playing and will actually soon have kwa internal report coming up
1. Damn you for beating me to this, I was going to make a video on the internals because I am getting some upgrade parts in the mail soon. Whatever I will still make one anyway.
2. The gearbox is not a V7, this gun uses no v7 parts.
3. G&G put the 8mm bearing on the sector gear because the sector gear takes the most punishment out of any gears in the mechbox.
4. The shrink wrap is to keep the wires together, making the upper receiver easier to slide into the stock.
lolz motor condom
xXL3GITAMACYXx1 2 weeks ago
@TVforSmucks you are now a real airsoft player. Congradulations.
DeathShepardAirsoft 2 months ago
Is the motor a short type?
slit555 7 months ago
man a week after getting my first airsoft gun i tore it apart the upgaded it
TVforSmucks 8 months ago
can it take Agm or other mags??
GhostOpsAirsoft 1 year ago
@GhostOpsAirsoft no. only G&G
POK3MONMA5TER 1 year ago
"the more harder you do it, the more pressure you put into it, the more it seals up better." #LOL
TheAssassin111 1 year ago
they probably shrink wrapped the motor to water proof it? idk
dingbat667 1 year ago
I like the piston head, it is very quiet, but unfortunately if broke, mostly my fault
RYDERkN 1 year ago
Please respond for great justice. Is the cylinder head compatible with any aftermarket ones? It seems like the only downfall on the whole gearbox.
CharlieJulietEcho 1 year ago
Damn. I'm afraid to open up my V.7 to complicated for me.
vgamedude12 2 years ago
those teeth on the piston are wore down from pre matur engagment try reoving the second and third tooth from the first one that engages the piston
koreywhitley 2 years ago
wait so i can use ver.2 gears in this?!?!?!
OSU5312 3 years ago
yes the m14 series(including the soc16) are all compatible internal wise on the main parts, gears, piston, head, and motor
goxsv 3 years ago
what size is the motor? Is it med. or small I heard it was small but I just don't know.
magicmark1292 2 years ago
heard the gears are version 2's
Dingusmaster792 3 years ago
I'm prety sure it's the v.4, this gun is only a couple months old
goxsv 3 years ago
is this the G&G M14 V.3? and since when did your friend have that gun?
KokoBrosas 3 years ago
yea, I found out l8r that the stock shimming in side 2 side play is very tight but the shimming in space between gears sucks cohones
goxsv 3 years ago
@goxsv would i be in good shape if i use a 8.4v 4200 mah battery, and would this happen with this battry a systema energy motor short type and a m120 spring?
luisairguner 1 year ago
can't believe the spur gear broke. bad shimming?
Dingusmaster792 3 years ago
no its actually comparable to kwa in my opinion but the kwa motor has more torque than speed and vis virsa for the G&G but G&G has better internals (i.e. poly piston and head with that crazy nice o-ring and light gear setup) while externally the kwa is no doubt better and rock solid. while the g&g is still good, imo kwa is better externally. Overall though I would highly recommend both depending on what your looking for/playing and will actually soon have kwa internal report coming up
goxsv 3 years ago
wow G&G looks not as reliable as KWA right?
skaterpunk310 3 years ago
nice review, im going to rob you of that o-ring btw.
skimmy518 3 years ago
o wait, what v2 gb was that? it looks so frail
skimmy518 3 years ago
its a v7 gb
IhateSatan333 3 years ago
Couple things:
1. Damn you for beating me to this, I was going to make a video on the internals because I am getting some upgrade parts in the mail soon. Whatever I will still make one anyway.
2. The gearbox is not a V7, this gun uses no v7 parts.
3. G&G put the 8mm bearing on the sector gear because the sector gear takes the most punishment out of any gears in the mechbox.
4. The shrink wrap is to keep the wires together, making the upper receiver easier to slide into the stock.
CAwillruletheworld 3 years ago
its a V3 Spring Guide BTW.
serpentskim 3 years ago
haha 4:18 no.....just no.....
serpentskim 3 years ago