Added: 4 years ago
From: lbailey2705
Views: 31,542
Sort by time | Sort by thread (beta)

Link to this comment:

Share to:

All Comments (118)

Sign In or Sign Up now to post a comment!
  • Check*

  • You should lean into the gun when firing so you can absorb the recoil and when you get finished firing you need to heck the chamber to actually be sure the gun is unloaded

  • u betta get on tht front foot before u get nocked on your ass

  • he looks like jim carrey

  • Maybe if u I don't know leaned forward into the weapon u wouldn't have as much recoil, just sayin :/

  • Who cares that he doesn't have safety glasses on. Do you deer hunt with safety glasses on?? Fuck no so who gives a shit

  • love the wasr....exept the magazine rattle and the trigger slap

  • Thumbs up for the AK47, thumbs down for lack of safety glasses and poor stance.

  • I only heard 30 rounds go off, and its not a drum. How the fuck is this a "large capacity" magazine?

  • @mrfiux the "high capacity magazine" moniker stems from the 1994 AWB which designated any magazine that holds more that 10 rounds as "High Capacity" so that when that feature was combined with certain other features the weapon became an "assault rifle". A number of states still use this definition ( California being one as far as I know). While some proficient shooters argue the absurdity of this definition, from a legal perspective it's correct. A low-cap ak will only take single-stack mags.

  • O yea forgot...when chambering a round or "charging" it dont ride the bolt, pull back amd completely let go "slam into battery" safety glasses needed and never assume the rifle is empty..always clear the weapon before setting it down..remove mag..pull back bolt and see if there are no more round release bolt and put weapon in safety!!! Do people not have any common sense when it comes to weapons!!

  • You have absolutely no control over your weapon...who tought you ur stance?? Power stance for better control, dominant leg back facing out lean into the rifle "wich would be forward" and grip it firmly the you wouldnt be wobbling back!! By the way WASR-10 are not as bad as ppl make them out to be my WASR can go head to head with my buddys yugo and perform flawless...mine has the unddrfolder though

  • WASR = CRAP

  • romanian power:X

  • @overdose1989G  yeah

  • lean forward and get some safety glasses dude!

  • My WASR has none of the canted sight and trigger slap problems I've heard about. Magazine rattle? Yes, but no more than any other AK-series rifle I've run in to. Clearances are necessarily loose on any battle rifle to prevent stoppages. One of my main gripes about the AR-15/M16/M4 class of guns is that they are just too damn precision. I've never seen one that wouldnt' jam if you started runnings mags through it, and I've never seen an AR jam that was simple to clear.

  • I bought a WASR-10 a few years ago when the things first hit the import scene. Like the rest of the AK/SKS family it is monotonously reliable. Reliable period. Dry, wet, oiled, dirty, clean, hot, cold... the only way to make one stop firing is to unload it.

    The AR's are fun guns, but too finicky.... target guns only; wouldn't trust my life with one. In a survival situation I'd rather have one old rusty, filthy SKS or AK than a half-dozen meticulously cleaned and maintained AR rifles.

  • cant wait to get mine on monday!

  • I got a GP63 wasr10, looks and fires perfect. Picked it up unfired from century arms for $280. Yes, it's the good one not the old junk style. Tell me that's not a deal?

  • oh my. 16 and I know my stance better than you do. you look scared. lean into it. i dont mean to be a dick..but..get with it...

  • lean into it, u look like your scared

  • love my wasr its no russian ak-47 but its still great even my dads friend who had a russian ak-47 said it wasnt a bad gun.

  • How is the recoil when compared to a 12 gauge?

  • @kc9gpj It has less recoil than a 12 gauge. Trust me.

  • Lean forward man, it will help out a lot. Anyway, keep shooting and have fun!

  • Where do I buy ammo? Do all AK47s take the same ammo? Please help

  • @sirchristian12 All AK47's fire the 7.62x39 cartrige. AK74's take the 5.45x39 cartrige. Any gun store should sell ammunition. Brands such as Wolf, any of the Bear ammunition, Sellier & Bellot, and many others will work. I haven't tested it with my AK yet, but I get better groupings from firing Wolf Military Classic through my SKS.

  • Scream Wolverines When You Shoot it!

  • Looks like you were bringing the AK up before the recoil set in. I used to do this with my handgun.

  • 30 rounds isn't high capacity. That's normal capacity for an AK.

  • Lean into it.

  • I think the Romanian WASR is the perfect happy medium when looking for an AK. It has just the right quality/value ratio. The chinese ones are a little too crappy, and the Russian/Bulgarian ones are a little too expensive for the slight increase in quality ove the WASR. If you're looking to purchase an AK, I'd go for this one.

  • I have a Mauser M48,and I'm looking for a second rifle to own. How are these WASR-10 AK-47s?

  • @jmk0309 stay away from them. bad quality. notice how he has to shove the bolt forward.

  • @bearsfan1294 Actually, you shouldn't be shoving the bolt forward. I shot my buddies and the first time I shot it, I slowly closed the bolt and it jammed. This gun is meant to be abused, not babied. It's metal. Pull it all the way back, and let it slam shut. We put about 350 jam-free rounds through his gun that afternoon. All without a mis-feed or mis-fire. (after my hiccup, of course).

  • @jmk0309 THE WASR'S NOW ARE FINE MAN, he shoved the bolt forward because he does not know what he is doing.

  • Comment removed

  • mine is great, havent had a single jam you really cant beat it for the price

  • Try a AK-74 type muzzle brake to reduce some of that muzzle flip. I have a slant-cut muzzle brake, and an AK-74 type muzzle brake. They do make a difference in accuracy. If your rifle has left-handed threads, you can just screw one on. Happy shooting man.

  • are the ak 74 style muzzle breaks better for accuracy?

  • Yes, they eliminate a lot of the muzzle flip, so you get more accurate follow-up shots. The slant-cut is pretty good, but the 74-style is much better. Tapco makes them and they are everywhere, for around $21.00-$25.00, just Google them and you will find them. Let me know what you think once you get one. Later.

  • well i have the tapco slant but it fits relly weird on wasrs. so yeah im probably just gonna end up buying the ak 74 style break and yep ill let ya know bro

  • Go watch my wasr 1o run and gun video

  • Because you can go deaf shooting it idiot.

  • because it's not airsoft. guns are loud, idiot.

  • your dumb if you dont wear ear muffs its unnecessarily blowing out your ears

  • @unggoyFists Have you ever shot an AK under an enclosure? They are incredibly fucking loud.

  • @EricsTechTalk I was dumb enough to fire one through a concrete tube (open end to open end, not broad-side mind you)......I'm surprised I can still hear.

  • i would love to have a wasr10

  • 30 round AK mag is normal capacity. four-drillion round mags are hi cap.

  • thats normal capacity for an ak and ak clone, i know some wasr-10's come in single stack, but id call that a low capacity.

  • ur not leaning back far enough

  • your suposed to lean foward to obsorbed the recoil

  • @bmzaron1 Are you being sarcastic?

  • is this a real gun. because i seen the same one at a sports store

  • XxILoveMyAK47xX  aka Weisserwolf aka WASR=crap guy is back as XxAnarchyUSAxX

    just a heads up

  • lol he is shooting like a woman

  • Let the bolt lose when you chamber a round, keep your bloody finger off the trigger until your ready to fire and lean in.

  • Why is it crap?

  • I have seen a few bad WASR's. It is not the WASR, it is Century ARMS! you idiots! I have a WASR I would put my life on over everything. AK's DO not need close tolerences people! anyone that thinks there are better made AK's just because there fitted better do not know a damn thing about the fundamentals of firearms!

  • @sabbathmusic Is the WASR-10 stamped or milled?

  • @Humberto4790 stamped

  • @MrNelsonb2 Awww.

  • @sabbathmusic agreed i have one never had any problems with it some do have canted sights but you can have that problem fixed buy a gunsmith or by yourself if you know a bit about sights still a good gun for the price

  • @sabbathmusic id rather have a firearm with some play in the machinical components that way i know if dirt or mud gets trapped in it during a critical situation its not going to jam its going to fire.

  • @sabbathmusic i have one bought it used with a mag put through it never had a single problem like you said century arms made a few batches of crappy ones a canted sight or a sloppy job on milling out the mag well can be easily fixed a few friends had these problems and you buy a polymer mag takes care of the mag giggle and you can adjust a canted sight they're decent rifles

  • u=gay

  • shit > u

  • I got a WASR 10...coolest guns ever i like it...i got a very clean built one and it shoots very good...pretty accurate too...check my vids

  • put a wasr 10,a glock,smith & wesson, rmmington 30-06,any gun in a pond for a year,or muddy water, tommy gun,or any other gun u can think of with a loaded clip and after a year or so pull it out and pull the trigger ill put my life on the line with the wasr 10.

  • Umm, the shitty AK clone would rust shut faster than ANY of the firearms you mentioned...... just like the tommy gun would, and the only firearm that would still work after a year in shitty water would be the glock..... not to mention the ammo not firing, you would need different ammo for all of them!

  • even a glock couldnt last a whole YEAR in water. no gun is going to work right after that.

  • Romanian WASR's DO not SUCK balls! some slipped through that have canted sights and gas tubes, BUT, these are damn good guns, BulgarisdwjfbkhaWBHDALK

  • thats right.. a few gave thousands a bad rep

  • i just got 1 for 350$ cant beat reliability and price. i think people talk shit because they over pay for a rifle that does the same thing shoot.

  • @numderenin i really wish i would have boughten a wasr 10 a couple years ago when you could get them for around 350 to 400 out the door and now that i achually want one the cheapest i can find them is 599 at cabellas and the army surplus and i never see them anywere els were i live

  • @greygoosevodka1 a retail store around here called Dunhams sold me one on sale for 399, wait for the sales.

  • @andersonnonono ya we dont got a dunhams here in washington. i went ahead and picked up a egyptian maadi for 400 used

  • @greygoosevodka1 An Egyptian Maadi is a real AK because they are made on the same machine press because the Russians sent them to Egypt. FACT

  • @Fujisuka yes i know that already. thanks though

  • I got my WASR underfolder right before the ammo & gun scare. Got it for $439, which would be a steal right now. Now, finding reasonably priced ammo is another story.......

  • in memphis you get 400 rounds for $200

  • XxILoveMyAK47xX =CRAP

  • That shit is nice FUCK everything else!

  • Why is he leaning away from the rifle?

    And he is just pressing the trigger like its an Xbox controller or something....

    Damn

    Hard failure

  • WeissrWuss666 (aka XxILoveMyAK47xX) thinks that just because his transvestite boyfriend made a straw purchase on a shitty SAR-1 for his fat ass that it will make up for his crooked two-inch penis. Your gun sucks, and your eyes are too close together. you'll never be cool. Deal with it, loser.

  • I'm not the one with my eyes a half-inch apart listening to eighties pop-metal made 20 years ago for eight-year-olds. You will always be stupid, and you will always be a loser. Deal with it.

  • XxILoveMyAK47xX =CRAP

  • This kid has no idea how to fire a rifle...

  • 3 Suggestions:

    1. When you pull the bolt back, instead of pushing it back up, just let it go.

    2. Try leaning forward when you shoot standing up, it really helps with recoil.

    3. Install a muzzle break to the end, I have the slant type muzzle break and I've done a comparison and it REALLY helps with recoil.

    Great vid though!

  • The firearm he is using is a good descent firearm, but the only problem I have with this video is very commen at the range and other videos where the shooters are not experienced is that they lean back and stand up straight witch is ok but shows how experienced they truly are they should put their wieght forward lean forward aswell into the firearm.

  • You should pull the bolt carrier lever back and release it. Never ride it forward on an AK like the young man did here. The AK is made to pull and release and let the spring thrust forward to engage and load the shell.

  • If he had a Muzzle brake it'll jump less. increase accurracy

  • not all WASR's come with muzzle breaks,

    I have a serious craving to purchase one this summer

  • Don't fight it. Buy one. Do it now!

    Seriously, you'd better get on board before Obama & Co. say you can't buy anything.

  • oh I will, I'll probably pick one up later this month.

    I know a place where I can get a factory new WASR-10 for $500. Most other places cost up to 800 and up.

    I am buying one because I want one, not out of fear.

    I honestly think all this fear about gun bans has been proped up by the gun industry to sell more guns at higer prices.

    now granted there is a higher chance of gun restrictions while dems control the government, no doubt about it.

    and btw FUCK OBAMA and his commie cronies

  • $500 is a good price right now. I suggest you get one which is lugged and threaded to really piss off the liberals.

  • lol oh it will be, it will come with a bayonet and two mags. I will probably pick up 3 additional mags and to start 1,000 rounds.

    part of the reason why I want an AK is because nothing else makes the politicians shit in their pants more.

  • make sure you get a GP WASR 10/63. it will say so on the receiver.

    there is a difference. they are mil spec. and much better quality than your run of the mill wasr 10.

    Although, most brand new rifles you'll find at gun shops these days should be the gp 10/63.

    just make sure. and check the fuckers for major mag wobble and canted sights. very important.. otherwise, they are outstanding rifles.

  • lean into it

  • ive never had a problem with my wasr-10. the only problems i hear from the wasr variants, are the wasr-3. the .223s just keep jamming. other than that, its a good, rugged rifle.

  • This vid made me sOOoOoOo wet LOL a

  • wasr isnt a piece of crap, its very easy to modify them to double stack with a dereml tool.

    all you need is a double stack bolt becuase the wasrs' feel lip is too narrow.

    of the wasr's iv seen they are all built very well with nice trigger sets(i hate my maadi trigger set)id trade my maadi/usa for a well moded wasr any day.

  • haha this guy cant seem to controll a 7.62 soviet round

  • i think he did fine, i've seen worse

  • its cause hes leaning back

  • You!!! Your the one who blocked my old account Warfreak1944! Great AK.

Loading...
Alert icon
0 / 00Unsaved Playlist Return to active list
    1. Your queue is empty. Add videos to your queue using this button:
      or sign in to load a different list.
    Loading...Loading...Saving...
    • Clear all videos from this list
    • Learn more