4 litre's are tough as it is, but for this type of power range I'd think maybe an atomic rebuild (rated to 950kw). Thanks be to everything good and holy for the 4 litre in-line six.
i dont see why ford will sell this model car in the u.s.a. i would like tosee rwd on the road here.all we got is fwd pos.nice car love the model and look.good day down under
dude you should make it awd just to save on tires inless you want it for burnouts but with awd and that much power you'll probably still spin em somthing shocking
hey mate question.. what turbo r u using.. im using a 42r on mine and it made just over 700rwhp last week on the hub dyno... and who built the motor? cheers
Thisso is a tuff as... xr6t bf UTE. Saw this at hitorque performance when i was getin my xr6t ute tuned.
Think it has a garret 42r? with external gate on himount manifold, fully built atomic motor, full 4inch exhaust, plenum, 5" intake with full plazmaman front mount intercooler system, fuel reg, surge tank and so much more. Fries tyres in all gears lol :P
@superhornet81 We are talking about a Ford engine? Australia has no engines. If you want to call a ford motor Australian you may as well call half the Toyotas in Australia Aussie too.
@se7en1976 We are talking about a Ford engine. It was designed and built in Australia. Never said Ford is Australian. Clearly you're trying to start something, but it's pointless because you're basing it off quotes never said.
@theboxmike Oh right.. IM the idiot? Its "you're" mr fucking illiterate. Besides that how many cars do Toyota or mitsubishi assemble here yet we dont identify as Australian.. How about fuck off you know nothing cunt
thay are factory turbo as well with a huge garrett xr6 turbo- now F6 tyfoon the inline 6 4Liter 2xover head cam turbo engine is all australian built rated at 415fwhp stock and thay dont export these ,
It's a Turbonetics GTK1000. The latest model is water/oil cooled, ceramic bearing and HPC on the turbine housing all from factory. Run's out of puff before 1000hp but will get you into the 900's fairly easily.
25% is less 138rwkw. That's a lot less than factory. What drugs are you on dude? With the right combination of suspension, tyres and boost off the line, he'll put most of that down. Add a 9 inch and 4 link and he'll put all of it down and more. Now get off the drugs and get yourself a job.
yeah i was thinking about that haha everyone would proberly complain that aint a ford blabla bla lol till you gas it and then theyll say yeah thats a ford
"that's nothing my stock vl turbo with a few more pound will match that..." lol just kidding i have a bf xr6t id love to have a set up like ures. Top credit dude wild car!
thanks, the car now has the new turbo and on 28 pound has made 816rwhp which compared to the turbo i had in this video that 745rwhp was made with 34 pound. so now that with 40 pound i should get the 1000rwhp
Awesome!
brisXr6t 1 month ago
i hate fords but that is nice power mate
michaelfrench1 5 months ago
i love this song!
somenutjob 6 months ago
Co za asy!
JOTG2000 11 months ago
is that a Turbonetics GT-K turbo or is it just ur own ceramic coated job?
MechTech82 1 year ago
@fredderickT
4 litre's are tough as it is, but for this type of power range I'd think maybe an atomic rebuild (rated to 950kw). Thanks be to everything good and holy for the 4 litre in-line six.
tapper88 1 year ago
gotta love the i6T :)
MechTech82 1 year ago
@MechTech82 I do :D
superhornet81 1 year ago
@tapper88 who does the Atomic rebuild? I've never heard of it...
Sound like fun :D
MechTech82 1 year ago
i dont see why ford will sell this model car in the u.s.a. i would like tosee rwd on the road here.all we got is fwd pos.nice car love the model and look.good day down under
MFP1520 1 year ago
Comment removed
450hp202turbo 1 year ago
dude you should make it awd just to save on tires inless you want it for burnouts but with awd and that much power you'll probably still spin em somthing shocking
521scotty125 1 year ago
hey mate question.. what turbo r u using.. im using a 42r on mine and it made just over 700rwhp last week on the hub dyno... and who built the motor? cheers
bruisr678 1 year ago
thats fuckin hot I want to drive it
seanieisere 1 year ago
Comment removed
drftme 2 years ago
Lol what a retarded question.
Rollinfourlitre 2 years ago
Thisso is a tuff as... xr6t bf UTE. Saw this at hitorque performance when i was getin my xr6t ute tuned.
Think it has a garret 42r? with external gate on himount manifold, fully built atomic motor, full 4inch exhaust, plenum, 5" intake with full plazmaman front mount intercooler system, fuel reg, surge tank and so much more. Fries tyres in all gears lol :P
Mistiso777 2 years ago
At least there is a nice note to for the holden drivers to listen to while they are behind you. That xr is a monster
L3e8o1 2 years ago 13
u should be proud of ur car mate it a machine
HITER55 2 years ago
Thats a Ute isnt it? saw the plates on AFF but cant remember if its a sedan or not
Barraman69 2 years ago
What is a Xr6? I see it every were
Niel360 2 years ago
its a 6 cylinder ford falcon,made in australia. they are rockets when you put a turbo on them
cannibaskid 2 years ago
The only Aussie 6 left, and something the country is proud of.
superhornet81 2 years ago 10
@superhornet81 Since when was Ford Australian?
se7en1976 1 year ago
@se7en1976 Who said it was?
superhornet81 1 year ago
@superhornet81 you called it an Aussie 6.. so errr.. you?
se7en1976 1 year ago
@se7en1976 It is an Aussie 6, but who said Ford is Australian??
superhornet81 1 year ago
@superhornet81 We are talking about a Ford engine? Australia has no engines. If you want to call a ford motor Australian you may as well call half the Toyotas in Australia Aussie too.
se7en1976 1 year ago
Comment removed
superhornet81 1 year ago
@se7en1976 We are talking about a Ford engine. It was designed and built in Australia. Never said Ford is Australian. Clearly you're trying to start something, but it's pointless because you're basing it off quotes never said.
superhornet81 1 year ago
@se7en1976 It is an australian motor, and we call half the Japanese aussies cause they don't go home.
JOTG2000 1 year ago
@se7en1976 I DONT UNDER STAND you guys wtf? its FORD Australia a branch of the US ford company
its ford austrailans own engine cost ford au millions to put this in mass production.
450hp202turbo 1 year ago
@se7en1976 your an idiot. the 4.0 has been in australian made for a very long time.
theboxmike 11 months ago
@theboxmike Oh right.. IM the idiot? Its "you're" mr fucking illiterate. Besides that how many cars do Toyota or mitsubishi assemble here yet we dont identify as Australian.. How about fuck off you know nothing cunt
se7en1976 11 months ago
@se7en1976 Mitsubishi i assemble No cars here
Shows how much you know Fucking Noob head
theboxmike 10 months ago
thay are factory turbo as well with a huge garrett xr6 turbo- now F6 tyfoon the inline 6 4Liter 2xover head cam turbo engine is all australian built rated at 415fwhp stock and thay dont export these ,
450hp202turbo 2 years ago 2
@450hp202turbo well said mate.
superhornet81 1 year ago
a car.
muratcoban123456789 2 years ago
how many sets of tyres do u go through hourly ..
HITER55 2 years ago
u holden fuckers wouldt know a good car if it fucken hit ya?? great mod 2 a car that has turned so meny heads since its release.
fuedalicous 2 years ago 2
what a piece of shit adam
j03l5k1 2 years ago
Dont get sucked in
bnz500 2 years ago
ingredients for twisting the tailshaft.
seevaeurmouf 3 years ago
Has it got a Mr Turbo turbo on it? If so, which one?
karlwidakay 3 years ago
It's a Turbonetics GTK1000. The latest model is water/oil cooled, ceramic bearing and HPC on the turbine housing all from factory. Run's out of puff before 1000hp but will get you into the 900's fairly easily.
scotchfillet 2 years ago
is it just a dyno queen or does it run good numbers on the quater
blkidiot 3 years ago
yeh awesome, i would like to see you put more than 25% of that power to the ground in your ford/holden who gives a fuck bucket.
rode1979 3 years ago
25% is less 138rwkw. That's a lot less than factory. What drugs are you on dude? With the right combination of suspension, tyres and boost off the line, he'll put most of that down. Add a 9 inch and 4 link and he'll put all of it down and more. Now get off the drugs and get yourself a job.
scotchfillet 2 years ago
Comment removed
scotchfillet 2 years ago
what have you done to the internals to force 40 pounds through it??
blockie44 3 years ago
You'd have to do the interndals to put 18 PSI through it
vrednie 2 years ago
fuck me that's a nice car,i only wish i could afford one,
just out of curiosity,would ford sell a seperate engine? that would be sweet in my zl fairlane
fairlaneguy82 3 years ago
40 PSI! you arent serious
fairlaneguy82 3 years ago
these barra engines are pretty impressive,strong block and potential to make some power. its basically fords version of the 2jz.=)
mixtremesvig 3 years ago
Good figures mate.
Hanras 3 years ago
thats a nice falcon, id love to import one into the states
mixtremesvig 3 years ago 3
yeah i was thinking about that haha everyone would proberly complain that aint a ford blabla bla lol till you gas it and then theyll say yeah thats a ford
wax333 3 years ago
well a auto VL turbo with a mere 370rwhp can crack 10's all day long so you'd wanna hope so ;p
ozzydan22 3 years ago
haha das tru
all dat power, dont make it waste niggaaa
but the xr6 turbo sounds fkn nice in real life man
wrxrulz99 3 years ago
Massive power! Dya reckon you'll crack the 10's?
scotchfillet 3 years ago
yet another bullshit car from hi torque
well done
xr6uteburnout 3 years ago
very nice ride
want to swap cars?
mounirraad01 3 years ago
congrats on the results awsome machine
cant wait to see the results on the bigger turbo setup
thevpstroker 3 years ago
"that's nothing my stock vl turbo with a few more pound will match that..." lol just kidding i have a bf xr6t id love to have a set up like ures. Top credit dude wild car!
brcNix 3 years ago
shite!
apaial34 3 years ago
Jesus man! That is nuts!
When you're done with that plenum (like you're done with that turbo) I'll chuck it on my F6 lol
Nice car mate ;)
Jimsa84 3 years ago
Who made the intake manifold? It looks sexy! What size is the throttle body ohh and who made the turbo manifold ETM?
AlionXeer 3 years ago
plazmaman plenium, stock throtle body and 6boost manifold
athiselton 3 years ago
@AlionXeer
WalkoBoi 1 year ago
awesome machine, at that power level(745.1 at rears) how is the driveability?
mikxr 3 years ago
draws black lines everywhere still spins all through forth of the clock....
athiselton 3 years ago
20 inch
athiselton 3 years ago
where do i get one of thoses intake manifolds from :D
AlionXeer 3 years ago
plazmaman
athiselton 3 years ago
new turbo should be here this week.... should see 850-900 at the wheels...... i want to crack the 900 mark
athiselton 3 years ago
whats this baby done 1/4mile?
im really interested
buzalot 3 years ago
900 FUCK ME DEAD ,nice car mate
fairlaneguy82 3 years ago
thanks, the car now has the new turbo and on 28 pound has made 816rwhp which compared to the turbo i had in this video that 745rwhp was made with 34 pound. so now that with 40 pound i should get the 1000rwhp
athiselton 3 years ago
Mmmmmmmmm.
But what is it like on the road with a turbo that big must be a little slow on the boost
AlionXeer 3 years ago
It is not a T04Z. Its a GTK 850/1000.
spine350 3 years ago
gtk1000 but going a bigger turbo.... thinking of a gt4708 1200hp garrett
athiselton 3 years ago
T04Z power haha ... dam i want that setup in my xr6t 35/40 will have to do haha
scubzz 3 years ago
i followed this ute on a cruise not to long ago, fucking nuts. its a weapon!
pipbrendan 3 years ago