I would help u out if Iknew those two things charge it up and time it the amp hours or the whatever it sayes on the batterys for size. I have sevrel free energy machines and this stuff is very intresting to me. hope to hear back from u on this.cheers and good luck. oh it would help if the wires were a little larger espely the ones that on the battery.
@MrJetjoe I respond to your post with some delay. When I made the video, I wasn't interested in the technical side, because I did it just for fun ...
After I made the video and put it on YT, I dismounted the whole mechanism, so I don't know how many amps the alternator absorbed and the battery life. However, according to my approximate calculation, the absorption of amps from the batteries may be of about twenty amps at 24 volts.
@MrJetjoe They have 2 car batteries. I don't know how much charge the batteries have, because I did run the engine just enough time to do the video ...
@MrJetjoe thanks for the info, a beeter ex. would be a 500wat light 5 amp battery charger and onother set of batterys to charge while the gen is running. also use at least a 24 inch belt between moter and gen.cheers
one suggestion. get async motor, two windings connect with proper caps, get resonance, third will be generative. link motor with alternator. all what the alternator and third winding give - your "juice". what would be power balance now
there is a weard thing that happens with things like this power genrated transfers through the moters magnetics feilds. I know this is how tesla discovered wireless transfer of power. I never tryed a sheild between the moters?
@MrJetjoe That there is a weard thing happens with things like this genrated power transfers through the magnetics moters feilds. I know this is how Tesla Discovered wireless transfer of power. I never tryed to Sheild Between the moters?
if u use a much longer belt it will increase the effency of it. don't wast any time on the people that think this is fake I know I have done this. they are all brainwashed buy outdated laws of the past ( phyices thermodynamics) that have been proven wrong by thaine hinses they just havent heard it or done there own experments. If u don't belive it try it yourself before u say it is fake your not a expert if u don't know.
but anyway, i noticed he is adding capacitor bank on the side of the generator; maybe its for giving a moment of full powered rotating during the transition the generator mode !
no matter how much it looks perfect; there are still so many questions to answer !
beside i tried an experience at home with smaller dc motors; and it was complete falior:
the energy generated is always smaller that the heaviness of the bigger generator + the difficulty to transfere the rotating power to the generator
yeahi even commented on his video; the following = why , ? while the lighted bulbs have almost no effect on the speed of the turning, why when you stop the lights , the speed of rotating doesnt exponentially increase till destruction ?
@tyreza79 I already knew of this video. You don't believe everything you see. You don't think it's a FAKE, hidden wiring under the table? If it were true, this man would not put the video on YT.
Note: each time he lights a bulb, there is no electric brake, no absorption, which, however, it should have for each bulb that lights up ..
Did you notice that the man has taken away the option to vote his video;)
the problem is that the batteries will lose all energy, and you would have to feed the alternator a 230acv with and charger circuit to recharge the batteries, or give the dc dynamo a motrice power and let it recharge the battery !!!
mm
if only you can add solar pannel to the whole familly and made this turn forever ! :)
No reason why this would not work. But the efficiency cannot be that good. I'd like to know what the current draw is on that 24V motor. BTW....LOL...Looks like a horror movie with the very slow movements with the black glove on. I was waiting for you to grab a knife behind the generator head.
A realy great idea! This way, we can save the sensitive electronic equipment from sparks, thunder, GIC etc(Guess how many PSUs I have actually changed in myt PC?). How much noise does it produce?
@Riskteven I know that the device makes a noise and I also know that there are silent electronic inverters. But perhaps you did not read well the description of my video. (This video is only for educational purposes and curiosity)
@Roobert33 I read the description and yes whwew i live the standard outlet voltage is 230 volts. But I would add a 10 amp fuse, if not just 6 amp to be sure, to the inverter.
I had a whole 44gal drum of those globes set aside from the local race track. But alas they seem to have alooped from my storage space in the grounds' MSB hut (should have got them sooner)
I would help u out if Iknew those two things charge it up and time it the amp hours or the whatever it sayes on the batterys for size. I have sevrel free energy machines and this stuff is very intresting to me. hope to hear back from u on this.cheers and good luck. oh it would help if the wires were a little larger espely the ones that on the battery.
MrJetjoe 4 days ago
@MrJetjoe I respond to your post with some delay. When I made the video, I wasn't interested in the technical side, because I did it just for fun ...
After I made the video and put it on YT, I dismounted the whole mechanism, so I don't know how many amps the alternator absorbed and the battery life. However, according to my approximate calculation, the absorption of amps from the batteries may be of about twenty amps at 24 volts.
Bye :)
Roobert33 1 day ago
what size batterys and how long wil it run on a full charge?
MrJetjoe 5 days ago
@MrJetjoe They have 2 car batteries. I don't know how much charge the batteries have, because I did run the engine just enough time to do the video ...
Roobert33 4 days ago
@MrJetjoe thanks for the info, a beeter ex. would be a 500wat light 5 amp battery charger and onother set of batterys to charge while the gen is running. also use at least a 24 inch belt between moter and gen.cheers
MrJetjoe 1 day ago
This is basically a very primitive way to convert dc to ac current.
SaGalv 5 days ago
one suggestion. get async motor, two windings connect with proper caps, get resonance, third will be generative. link motor with alternator. all what the alternator and third winding give - your "juice". what would be power balance now
Abrec66 6 days ago
there is a weard thing that happens with things like this power genrated transfers through the moters magnetics feilds. I know this is how tesla discovered wireless transfer of power. I never tryed a sheild between the moters?
MrJetjoe 1 week ago
@MrJetjoe That there is a weard thing happens with things like this genrated power transfers through the magnetics moters feilds. I know this is how Tesla Discovered wireless transfer of power. I never tryed to Sheild Between the moters?
What means Sheild ?
Roobert33 6 days ago
@Roobert33 g10, finnalk,mabe plastic something that a magnetic feild is blocked buy???brass screen?
MrJetjoe 6 days ago
if u use a much longer belt it will increase the effency of it. don't wast any time on the people that think this is fake I know I have done this. they are all brainwashed buy outdated laws of the past ( phyices thermodynamics) that have been proven wrong by thaine hinses they just havent heard it or done there own experments. If u don't belive it try it yourself before u say it is fake your not a expert if u don't know.
MrJetjoe 1 week ago
the best ideai have till now is using a solar panel
i mean a big one, that feeds energy throught an inverter to an induction motor that feeds by motrice power generator alternator; or dc generator !
tyreza79 1 week ago
but anyway, i noticed he is adding capacitor bank on the side of the generator; maybe its for giving a moment of full powered rotating during the transition the generator mode !
no matter how much it looks perfect; there are still so many questions to answer !
beside i tried an experience at home with smaller dc motors; and it was complete falior:
the energy generated is always smaller that the heaviness of the bigger generator + the difficulty to transfere the rotating power to the generator
tyreza79 1 week ago
@tyreza79 If it were true, it would be the most sensational discovery of the millennium, but it is just a FAKE well done ...
Bye :)
Roobert33 1 week ago
yeahi even commented on his video; the following = why , ? while the lighted bulbs have almost no effect on the speed of the turning, why when you stop the lights , the speed of rotating doesnt exponentially increase till destruction ?
he didnt reply anyway !
tyreza79 1 week ago
well it is interssting,; but look at this video
youtube.com/watch?v=LgEsSOphlp8
tyreza79 1 week ago
@tyreza79 I already knew of this video. You don't believe everything you see. You don't think it's a FAKE, hidden wiring under the table? If it were true, this man would not put the video on YT.
Note: each time he lights a bulb, there is no electric brake, no absorption, which, however, it should have for each bulb that lights up ..
Did you notice that the man has taken away the option to vote his video;)
Roobert33 1 week ago
the problem is that the batteries will lose all energy, and you would have to feed the alternator a 230acv with and charger circuit to recharge the batteries, or give the dc dynamo a motrice power and let it recharge the battery !!!
mm
if only you can add solar pannel to the whole familly and made this turn forever ! :)
tyreza79 1 week ago in playlist Uploaded videos
@tyreza79 This video is only for the purpose of vision and curiosity, it has nothing of useful in the field of free energy..
Thanks for comment :)
Roobert33 1 week ago
No reason why this would not work. But the efficiency cannot be that good. I'd like to know what the current draw is on that 24V motor. BTW....LOL...Looks like a horror movie with the very slow movements with the black glove on. I was waiting for you to grab a knife behind the generator head.
myvideoisonutube 1 week ago
@myvideoisonutube I was the cameraman, I could not make fast movements, the video would be shaky and not watchable...
Roobert33 1 week ago
lol, dangerous as all get out....rubber glove included. need to tighten up that belt too.
AccuracyMarked 2 weeks ago
@AccuracyMarked
Thanks for the comment :)
I can't tighten over the belt of the motor, because it slows down the speed with more friction.
Roobert33 2 weeks ago
@Roobert33 Yes, thought that's why you left it loose....need a timing belt...versus those "V" belts...for less friction-shaft strain.
AccuracyMarked 2 weeks ago
@AccuracyMarked Yes, you're right, it needs a timing belt.
But I did a quick assembly, only to make a video, I have not been paying attention to it.
Bye :)
Roobert33 2 weeks ago
Your system will never stopped?
jasminrousseau 2 months ago
Hola amigo ^^
Nice demonstration on the dynamo and inverter :)
Feliz Navidad para ti i todo tu familia, no se italiano :( solamente español :)
Peace!
VZ2DAY
TheSolarSolsticeWave 2 months ago
@TheSolarSolsticeWave Thank you for the comment :)
Happy holidays!
Roobert33 2 months ago
and how many time still running ?
maparaco1 2 months ago in playlist Mais vídeos de Roobert33
now awnser me ... how you recharge the bateries ???
maparaco1 2 months ago in playlist Mais vídeos de Roobert33
great for brownout :)
roflector5000w 2 months ago
why its sparks while connectingto battery?
roflector5000w 2 months ago
@roflector5000w Absorption amper dynamo.
Roobert33 2 months ago
Hey cool inverter :)
Alexzvs15 2 months ago
A realy great idea! This way, we can save the sensitive electronic equipment from sparks, thunder, GIC etc(Guess how many PSUs I have actually changed in myt PC?). How much noise does it produce?
Riskteven 2 months ago
@Riskteven I know that the device makes a noise and I also know that there are silent electronic inverters. But perhaps you did not read well the description of my video. (This video is only for educational purposes and curiosity)
Bye!
Roobert33 2 months ago
@Roobert33 I read the description and yes whwew i live the standard outlet voltage is 230 volts. But I would add a 10 amp fuse, if not just 6 amp to be sure, to the inverter.
Riskteven 2 months ago
I had a whole 44gal drum of those globes set aside from the local race track. But alas they seem to have alooped from my storage space in the grounds' MSB hut (should have got them sooner)
zordmaker 2 months ago
Biggest bulb I've seen like that is 200W, that thing you've got there is a monster!
AintBigAintClever 2 months ago
As usual a masterpiece set up and very well executed.
Thanks for making this video.
Great to see a 1000 Watt lamp for 220 / 230 Volts
RODALCO2007 2 months ago
@RODALCO2007 Hi Raymond, thank you for the comment :)
Roobert33 2 months ago
io ho preso 29 in elettrotecnica grazie a quest'uomo...Rob sei un grande
grattujao 2 months ago
place a solar panel in front of the light bulb, small paddles on the belt to drive a wind turbine, feed all that power pack to the battery! whala!!!
More then enough power to run the huge amount of bullshit claims and videos posted about free energy on YT!
1BustedMyth 2 months ago
amazing, and fully linear. No switch mode or ic's
great videos
lolman2008112 2 months ago
where you could light bulb 1000 watts?
LOL..
ronalhalim92 2 months ago
hay que medir la potencia del dinamo de entrada, y la salida del inversor.
kuadroplo 2 months ago in playlist GERIEJI
try short circuit the inverter and show us :D
radu3x 2 months ago
Very nice love the video I once did it with a stepped motor
usmcjest 2 months ago
I like your gloves. Do have a mask also?
Skyzboob 2 months ago
this method seems quite inefficient
flamesecureUK 2 months ago
@flamesecureUK well each motor and coil devise lost about 33% or something like that.
hitachi088 2 months ago
@flamesecureUK seems
Skyzboob 2 months ago
Bet you drew a few amps doing that :)
KyleCarrington 2 months ago