Free energy technology exists!But the Oil coporations life depends on covering this up,Find the real deal, a free energy device at LT-MAGNET-MOTORdotCOM ,Free yourself!
@bRadicalmagic1 No, natural magnets my seem like they have an infinite source of energy but that's not entirely true. Overtime the stored magnetic energy wears down, especially through use. Why do you think some magnets fall off your refrigerator while others are nearly impossible to peel off?
Electromagnets have an unlimited source of magnetic energy but only through a limited source. Unless someone figures out how to cause an electromagnet to power an electromagnet perpetual motion is a myth
Energy sources without the need for fuel or energy input exist ,But the Establishment doesn't want ppl to know this,Check this free energy magnet motor at LT-MAGNET-MOTORdotCOM ,Free yourself!
I think it's a nice set up only because it is so simple. But as far as being able to produce electricity it can't. Once a load is placed on the wheel to capture the energy it will slow down and shortly after stop. Great stuff though I thinks it awesome to explore the idea of free and never ending energy. Good luck and happy hunting,
What do you mean can't produce electricity- I have no problem agreeing with you about the "load" thing- wont stay spinning if the mag rotor is under a load. Knot quite correct the device has started and brought up to speed a very heavy flywheel that will keep going. Still know good--BUT i have produced AC voltage with a non contact coil (0.6v) without effecting performace.
of course it spins the magnets becouse it is made of dimagnetic metal, you said it yourself it would work if you made it out of copper too. it work becouse of induction and magnet edies forming in the dimagnet metal ...the flywheel
"The duality of religion..." That is a very true statement. And it is quite amazing once you realize that the pyramids in Egypt were buitl 13,000 years ago and not the 5000 or 3000 claimed today.
We are not inventing anything new... we are only rediscovering what is lost.
"there is nothing ferrous on or in the flywheel (allthough it has some iron in it.."
Produces torque, and you have produced electricity with it, yet you can stop it with your hand. Whalespit indeed. Must be a social experiment; How many dumbasses on youtube are there. Well, this video proves there at least two.
I think I know what is going on. My hope would be that a large mass spinning would throw off gravitons which interact with the magnetic field of the magnets.
however what I think is happening is not eddy currents at all. It is simply how the magnetic field is reflected by the large metal flywheel back onto itself. this will repell the magnetic wheel and will work the same as N or S and no matter which direction.
Lets get the specs and build it if NO electricity or powered motor is involved. Only all permanent magnets. I for one will try to replicate it if what is shown is real and not rigged. I will be waiting for specs and blueprints.
LOOKS LIKE ---Mike is not trippin' no outside power involved. read the comments watch again. no trick no scam just an interesting "effect" it works and will be the basis for many useful products
Look up paramagnetism. Some materials like aluminium and copper produce an near equal and opposite force under a changing magnetic field. That's what is happening here. I hate to leave a comment on these thing because there are a lot of people willing to defend "free energy" quite offensively in some cases. I suggest you try performing a controlled experiment using the same amount of force, with and without the magnets and see the effect it has on how long the flywheel spins. good luck.
Great Job!!! Keep up the good work. My magnetic motor gets 25KW. I also use the ancient symetry to produce power. The Tri-Metatron Magnetic Motor will be out on the market early next year. My torque machine does not need help starting simply inject the rotors into the stator and WA LA, there the power is..absolutely AMAZING!!!
I dont know if anyone is aware but the spinning magnet is also turning do to airflow from big disc... its not all magnetic, diamagnetic, supernatural... whatever
I know why this work. I tried once to let a magnetic ball fall through a aluminium pipe and the ball fell very slowly. I realized that aluminium is a litle bit magnetic. YOu cand read that too. Even copper is a little. Because of the big mass of the flywheel are more magnetic particles in the wheel so they can move the magnets. So alu kind of acts like iron, but much less atraction force to the magnet. Thats what I know so far...
I havent read any of the other comments, and Im not sure what this video is supposed to be showing but I just had to comment on consti11's idea that copper and aluminium are magnetic and can therefore slow a magnet falling through a pipe of said material. He's right that this will work but he's wrong about the reason.the magnet slowing is because the pipe (aluminium/copper) are conductors, which create electricity when a magnetic field is moved through it.Lenz's law slows mag w/drag like effect
OK, now put it to use and generate electricity with it. Can it sustain rotation with a slight drag to turn/spin an armature to provide electricity or does it just stop?
I still haven't thought of a practical use of what you found, but I think it is very interesting that a non-magnetic material interacts with magnets that way. Keep digging, there's tons of things yet to be found. :)
what we have here is a failure to investigate! and/or read- I haven't defended anything but the facts: 1.have an open mind (or S.T.F.U.) 2. dont assume anything (or just think you KNOW) 3. go ahead and try it-you dont gotta BUY it. 4. I'm right (go ahead and explain it to me then (While your at it- Is gravity a particle, wave or what?) oh sorry textbook doesn't cover that yet does it. BUT gravity sure is everywhere now isn't it-regardless of my defence of it(or not)that and the fact this is fun
Why the fuck? Because eye sea what eye see. And I know what eye know. I'm stupid? Your the dumb fuck that doesn't have an open mind. Make one then get back to me.
Sorry, I hate having to be so sarcastic! What or How or even Why could this be a scam? People like you really need to open their minds-maybe even start with opening your EYES. There is NOTHING even REMOTELY scam like in this---whale whatever you want to lable it----gift, to any and all who have inteligence enough to know that it is truely a GIFT to all mankind. Thank GOD for leaving this information here for us to find and re-learn. Michael LaGrow whalespit at inbox com
One of the most interesting displays of eddy current that I've seen in a while..
It's the principal that you move a magnet across a magnetic or non-magnetic material and the magnet excites the electrons in the opposing material, just like wire in a generator armature winding.. When you excite the electrons the current it induces in the non-magnet generates an electromagnetic field that interacts with the magnet, usually causing a dynamic braking affect..
this reminds me of a motor found in an old russian pickup player. it had 2 coils witch are known to produce magnetic fields, they where static, but the interesting thing was that the rotor was pure aluminum. i loved to play with that...
oh dear, oh dear, oh dear. The metal doesnt have to be magnetic, it only has to be conductive which magnesium is. ANY conductor moving through a magnetic field get a current induced in it. This in turn creates a magnetic field in the conductor. Given that the magnets are on a rotating spindle as the magnetic field created by the back emf interferes with the permanent magnets it causes them to spin. The pattern of hte magnets is irrelevant. The field just has to be there.
Since current IS magnetism, it is unnecessary to think in terms of recursively converting magnetism into current and then back into magnetism. It seems like some text books were written to confuse this point, causing us to consume mental resources in an endless loop.
Digg deeper than level a physics and you will find you know nothing about "eddy currents" lenz law or lorenz law is not explained by modern physics. And the four magnets ARE stuck together in a "swastika" and it does have somthing to do with it.
If that is true then I am dead, I have been on many roller coasters that use eddy current braking to ensure the safety of the passengers, it's exactly the same principal of a magnet moving past a non magnetic, conductive material and being pushed back by the current it induces in the conductor.
And I suppose your not flying away into space because you dont know what gravity is either? No really, I'm sorry for the sarcasm but I have done reasearch and the term "eddy currents" just doesn't explain "why" or "what" is happening. If the disk is spinning it olny "pushes" the other magnets away at no time is there any attraction to either the N or S pole.
No attraction is required. What is happening is that the magnet is inducing a current in the disk and usually this would cause a force in the opposite direction to the rotation of the disk.
Newton's third law now comes into play. The magnet, exerting a force on the disk against the direction of rotation, experiences a force in the same direction of the rotation, causing it to move as if it were a gear meshed with the disk.
Just for clarification.....You haven't explained----ANYTHING. Go ahead and look it up. Modern physics has the words "eddy" "lenzs"ect. but NO idea WHY OR HOW. Newton may very well have been ---whale, WRONG. Have you looked into any "new" research, like string theory for instance. Someones wrong because math of the BIG does not play whale with the math of the very small now does it?
I have explained it to the same extent I could explain that an electrical generator works because the movement of the wires through a magnetic flux causes the electrons to move in the wire generating an electric current. In biology we don't know the exact mechanism of some metabolic pathways but we can still say that they are there because you can measure a response in the cell to the addition or removal of certain compounds.
What is supernatural about GRAVITY. (other than you dont have any idea (of your own) what it (gravity) is. Oh sorry your basing your argument without having seen the material I will (and have sent) to EVERYONE who has asked. Please send me an email address that eye can send attachments tooo.....I maybe I can provide enough information to show you that ---NO Sir, I am not "tripping"
Open an old hard drive power it up and hold a magnet over the spinning disk, it floats, same thing here. the mags induce a field in the metal... take a neo magnet and let it slide down a pice of copper or alumin. on a great slope, it's cool how it moves slowly down it.
History has been waiting for you all this time. All the hard working professors and scientists who wasted their time in the best universities in the world should bow down to your invention and your deep knowledge of magnets and camera positioning. Genius !
Thank You, All is for mankind when the time was right--right now. I am grateful for everyones intrest it has helped motivate me and reassure myself that I do indeeded SEA WHAT EYE SEE. I have and will continue sending as much information to anyone who asks. Just send me a message with an email adress that I can forward attachments to and I will forward all of my notes to any and all. whalspit at inbox dot com.THE GOD, HAS BLESSed US ALL. I'm NOT TRIPPIN'
Have you tried adding the other 3 mag rotors in the drawing? Could become even more amazing! Very interesting.
PS for all the people who want everything to fit into their "Laws", keep in mind there was a time that there was a 'Law' that said the Earth was flat!
Anybody can try this, it is a common trait of high strength magnets over aluminum. If you get a peice of glas and put a truly smooth peice of flat aluminum on it you can quickly pass a magnet close to surface in sweeping motion and the block of alloy will slide.
From what I have seen, there is a spindle with magnets attached secured to skate wheel (for the bearings). Secondly there is a large non-magnetic flywheel free spinning on its own spindle and bearings. Using a grinder tool to 'spin-up' the flywheel causes the magnet rotor to spin in sync throughout the flywheel process of using up its energy via friction.
Here is a good test: Rig up a bicycle generator to your magnets and power a bicycle headlight. Spin the wheel up and see how long it will run with the light on, and again with the light off. Leave everything else in place and just flip a switch to connect the light. This will tell you how much load you can put on your device and result it has on its inertia. If it looks promising, then power a small dc motor instead of the light and attach it to the flywheel to drive it :)
From what I gather in the posts the magnets are being turned by the flywheel with little or no degradation to the energy in the flywheel. However, the fact that the wheel can be stopped using a stationary magnet confirms that there is a magenetic field being generated in the flywheel that has the opposite polarity of the magnets.
I assure you that the orientiation of the magnets does not matter. The spinning disk only pushes, never atracting it pushes the N pole of the magnet and it pushes the S pole of the magnet.
one more time, after it is at full speed-the presence of the rotor package does NOT SLOW THE FLYWHEEL DOWN AT ALL. no magnets spin time 30-42 mins. w/magnets 30-42 mins. And useing just one magnet I can bring the disk to a full stop in under 4 mins.
The magnetic rotor has no load, and it diamagnetically pushes the wheel such that the only loss is in the skateboard bearings as far as its concerned. This loss compared to flywheel energy is probably less than 1/4 turn. The real test will be when the magnets are attached to a load as I have suggested.
maybe not. But the technology can be used to power an hybrid motor... when it starts to slowdown you can rev it up just like he did with the grinder... It may be difficult to use this on a vehicle because of gyroscopic accelerations... or maybe not... who knows?
is there a logical explanation to this? I mean if it works it is great but how can you explain the magnets are rotating without any force at all (given the flywheel is non magnetic). But actually you can see the magnets moving as if there where a magnetic field...
Everyone knows --its "lorentz law" or "lenz law" so just accept that and be done. Funy thing though when you get right down to the "physics" of it, modern physics is at a loss to explain either of these laws
gravity has nothing to do with it, as this thing would work better in outer space as it would inside a gravity field. Also, the swastika has nothing to do with it's operation, well other than add to the seemingly mysteric way it operates. sorry man, theres nothing religious, magical or otherwise abnormal about this, this principal was even used on the brakes of the car used to attempt a new land speed record
this isn't as amazing as it appears, the magnets are simply inducing eddy currents into the large rotor and those eddy currents in turn create an electromagnet the then creates an induction motor of sorts. that where and induction motor gets it name, by a magnetic field INDUCING a current, and repulsing magnetic field into the rotor, you have created nothing but a simple inefficient induction motor
Here's the explanation of this phenomenon : when any conductive material is moved in a magnetic field (or when the magnetic field changes with time), Foucault's currents are induced in the material. In turn, these currents create a magnetic field (like an electro magnet). The new field is opposed to the field which created it, which creates a repulsive force (for a more thorough explanation, look up Lenz's law).
I have run the wheel up to speed and timed it (NO mag rotor) 35-38 mins, run it up to speed again (w/ mag rotor) 32-36 mins. And I will mention that I can take a single neo magnet and bring the flywheel to a stop with out touching it in about 2 mins. send me an email address that I can send attachments to and I will send you as much info to you or anyone else who would like to experiment. whalespit at inbox com
I would hazzard a guess that the large flywheel is aluminium?
which supports my theory on eddy currents, also the reason your single neo mag slowed it down, referred to as "eddy current breaking"
Been doing a little experimenting of my own concerning the same thing, eddy's are the bane of electric motors and transformers, but if you've ever got the induction motor from an old record deck, that actually utilizes eddy currents to work.
How old of a record deck, what brand and how? Thanks for the info. I think the fly wheel is magnesium. I cant seem to measure these "currents" they are not magnetic. The little infromation I can find on this was termed "a motional electric field" by a professor at Berkeley and always is coupled with gravity
Magnesium does have some of the properties of aluminium where it comes to magnets, but you will find a lot of non magnetic metals will be affected by eddy's, one interresting experiment is a copper tube about 12 inches long with fairly thick wall, drop a neodymium down inside and it floats to the botton, not drops as expected.
the records decks would be something out of the 60s 70s 80s, the fan in my microwave uses an induction motor.
Heres the deal when I filmed this video it was with my cell phone and at the time had NEVER visited you tube. Travis was just someone standing there that I asked what time it was. And was filmed for my friends and was never intended to be viewed by the general public. I am serious build one, then, objectivly and with an open mind tell me that I am "trippin' "
By the way, i don't know about Mg but for sure Aluminium is turning magnetised when span--the spinning polarises the molecules. May be the same thing happens to Mg which may add to the interaction with the other (crossed) magnets.
Thanks for sharing! Thing is that, not only magnets, but mass also accumulates energy like a spring. Many experimentors try with light wheels with no mass which works more rarely.
Type search on Reidar Finsrud: his stuff runs months on end...
First I make no wild claims in the video or discription all the video is is a showing of a strange "effect" the disk does not "run" by itself (in the video I actually use a grinder to spin the flywheel) BUT it does not ever "pull" the magnets it only "pushes" them (it does not matter which pole is facing the flywheel) and after further experimentation it is my opinion the the disk is "deflecting" GRAVITY. I can NOT observe or detect ANY magnetism or electricity from the flywheel.
First I make wild claims in the video, disk does "run" by itself, a strange "effect". "pull". "pushes". it is my opinion the the disk is "deflecting" GRAVITY. I can NOT observe or detect ANY magnetism or electricity from the flywheel.
You cannot observe any magnetism from the flywheel (how do you expect to "observe" it?) but i tell you for a fact that in the case of aluminium it gets magnetic when span. Put iron peelings on a flat surface above the turning flywheel and see if they regroup (without other magnets around!)
That is Exactly how I came to the conculsion I held a plexiglass tray with iron filings above the flywheel/rotor combination to try an observer the flux interaction between them and there was NO FLUX above or coming from the flywheel. It is my theory that it is not some strange new power from the "other side" but simply gravity being "thrown" to the side of the flywheel.
good theory look up the properties of that material to interact with the aether,(graviton energy feild) and the m theory might have to do with gravity!
So far as telling the navajo their religous story is evil. Well, if we can tell a murderer he is evil. Then I have all the right in the world to tell the navajo that they are believing in evil demonic forces that wish to control them and that they need Jesus. What they do with that is their choice. You cannot say all religions are the same or right. Jesus claimed to be God incarnate. If you wish to continue this discussion I will gladly do it via e-mail.
They would write the big picture. Which Genesis 1 obviously is doing. Then they would start again and fill in details. We see this style of writing throughout ALL of genesis. You don't believe. Go ask an expert in ancient hebrew at a nearby university.
Before any rain had started. Also, you are incorrect in assuming that Genesis 1 and 2 are seperate accounts. We know know from archeaological finds of ancient babylonian and simialer cultures documents that this was how ALL cultures of that time wrote.
The mists in gen 2 are not speaking of anything divine. If you simply read the passage IN CONTEXT. You will see it is speaking of the HYDROLOGICAL cycle.
Ok, you are making the DEADLY assumption that if something is spiritual then that means it is good. The Bible clearly states that satan and his demons pose as angels of light. I would spend time to actually quote, but, I don't need to. Because it is there. I believe i understand where your duality idea in the bible comes from. After doing a small amount of research.
And go ahead and tell the Navajo Nation that The Sand painting "Whirrling Logs" is evil, Yes, Usen were sent here to teach us, and show us to be rightous to one another. That is NOT EVIL, no matter how you look at it.
Well, it is somewhat interesting. Most likely Lorenz law at work. Nothing special. I am really struggling to see your "technical" drawing theory. Nor can I understand this duality you speak of. Show me that in Christianity. Actual biblical chrsitianity. Show me dualism in the bible. I have read it 4+ times. It isn't there. Any technology the ancients had was given to them undoubtedly. Not by aliens, but by demons posing as aliens. Evolution is not fact.
yes it did and is-WHILE IT IS SPINNING, at slow speeds the effect IS present BUT the disk does not become "magnetic" the "force" from the disk olny PUSHES there is no atraction is pushes equaly on BOTH magnetic poles
please tell me the setup of this device..what kind of parts are used..i see the inlines wheel..and the magnets (how are they lined up?) and the big wheel?? is that all??
I agree with Btentzer, the interaction between the magnets and the flaywheel can be explained by the lorentz law. A current is induced in the conductive surface by a changing magnetic field. The current has its own magnetic field, which is sometimes referred to as a counter magnetic field. I do suspect that there was an advanced civ a long time ago though. IEEE uses the yin yang symol to represent AC. lol who know, maybe they know the secrets of mans forgetton history.
The AllSeeEyes, I ask you, what is going on with the WhiteCap known as
the "i" such as i'X i'Y i'Z. Finally, i'W.
Two twine as one, in love
cakegy 3 months ago
This is brilliant, I am going to build one asap!
repawnd 5 months ago
perpetual motion?
Morningstar667 10 months ago
This has been flagged as spam show
Free energy technology exists!But the Oil coporations life depends on covering this up,Find the real deal, a free energy device at LT-MAGNET-MOTORdotCOM ,Free yourself!
perplexfraction 1 year ago
Does perpetual motion with magnets exist?
bRadicalmagic1 1 year ago
@bRadicalmagic1 No, natural magnets my seem like they have an infinite source of energy but that's not entirely true. Overtime the stored magnetic energy wears down, especially through use. Why do you think some magnets fall off your refrigerator while others are nearly impossible to peel off?
Electromagnets have an unlimited source of magnetic energy but only through a limited source. Unless someone figures out how to cause an electromagnet to power an electromagnet perpetual motion is a myth
Darkwatch20 1 year ago
This has been flagged as spam show
Energy sources without the need for fuel or energy input exist ,But the Establishment doesn't want ppl to know this,Check this free energy magnet motor at LT-MAGNET-MOTORdotCOM ,Free yourself!
polysemousncrk 1 year ago
so for how much of time can this wheel spin by it own
cids7777 1 year ago
This is great for a frictionless gear or pulley. I think this would make for a good patent!
johnroach1 1 year ago
So this is significant because a non ferrous flywheel is creating a magnetic force that is spinning the magnets?
Indygoguy 1 year ago
I think it's a nice set up only because it is so simple. But as far as being able to produce electricity it can't. Once a load is placed on the wheel to capture the energy it will slow down and shortly after stop. Great stuff though I thinks it awesome to explore the idea of free and never ending energy. Good luck and happy hunting,
LivingAboveCloud9 1 year ago
What do you mean can't produce electricity- I have no problem agreeing with you about the "load" thing- wont stay spinning if the mag rotor is under a load. Knot quite correct the device has started and brought up to speed a very heavy flywheel that will keep going. Still know good--BUT i have produced AC voltage with a non contact coil (0.6v) without effecting performace.
whalespitindustries 1 year ago
@whalespitindustries As soon as you draw any current, it will slow down. I like the demo though!
valveman12 1 month ago
its a new power generator
stevil901 1 year ago
Isnt this almost like a perpetual motion?
sada3393 2 years ago
Mind-Blowing, thanks for sharing this amazing video!
iamnaagaraa 2 years ago
perhaps its because its 4am here but I just tried to read your side bar, I think you could be mad.
1jks 2 years ago
could be (if they think your knuts-your knot a threat) send me an email and I will forward my whole research database. And KNOW I AM KNOT Tripping
whalespitindustries 2 years ago
of course it spins the magnets becouse it is made of dimagnetic metal, you said it yourself it would work if you made it out of copper too. it work becouse of induction and magnet edies forming in the dimagnet metal ...the flywheel
1crazyfocker 2 years ago
Hey, this is spam....
"The duality of religion..." That is a very true statement. And it is quite amazing once you realize that the pyramids in Egypt were buitl 13,000 years ago and not the 5000 or 3000 claimed today.
We are not inventing anything new... we are only rediscovering what is lost.
watch?v=6pr8K5aD0MQ
Keep your head up!!
JC
RuffleTheTeacher 2 years ago
How strong is this thing? Does it have enough power to run anything and if so what? How fast can it recharge a car battery? A 9 volt battery?
eviltwinx 2 years ago
"there is nothing ferrous on or in the flywheel (allthough it has some iron in it.."
Produces torque, and you have produced electricity with it, yet you can stop it with your hand. Whalespit indeed. Must be a social experiment; How many dumbasses on youtube are there. Well, this video proves there at least two.
MensaMeme 2 years ago
I think I know what is going on. My hope would be that a large mass spinning would throw off gravitons which interact with the magnetic field of the magnets.
however what I think is happening is not eddy currents at all. It is simply how the magnetic field is reflected by the large metal flywheel back onto itself. this will repell the magnetic wheel and will work the same as N or S and no matter which direction.
Cheers
JOHN
abigpicture 2 years ago
Lets get the specs and build it if NO electricity or powered motor is involved. Only all permanent magnets. I for one will try to replicate it if what is shown is real and not rigged. I will be waiting for specs and blueprints.
64298 2 years ago
Comment removed
64298 2 years ago
LOOKS LIKE ---Mike is not trippin' no outside power involved. read the comments watch again. no trick no scam just an interesting "effect" it works and will be the basis for many useful products
whalespitindustries 2 years ago
or a more direct ansewer would be --no look at it again its a wheel off of a "scooter" , roller blade,
whalespitindustries 2 years ago
@64298 jeez you're so stupid..look a-hole its a skate wheel with a 1/4 inch
bearing...wake the fuck up from your cynical space.. show us the projects you're working on ... os sit down and shut the fuck up!
goose2goose2 1 year ago
How much tourk can it handle? No tourk no power!
AdomStar1 2 years ago
TOURQUE? LOTS OF IT.........
whalespitindustries 2 years ago
Look up paramagnetism. Some materials like aluminium and copper produce an near equal and opposite force under a changing magnetic field. That's what is happening here. I hate to leave a comment on these thing because there are a lot of people willing to defend "free energy" quite offensively in some cases. I suggest you try performing a controlled experiment using the same amount of force, with and without the magnets and see the effect it has on how long the flywheel spins. good luck.
nanoBorg88 2 years ago
Great Job!!! Keep up the good work. My magnetic motor gets 25KW. I also use the ancient symetry to produce power. The Tri-Metatron Magnetic Motor will be out on the market early next year. My torque machine does not need help starting simply inject the rotors into the stator and WA LA, there the power is..absolutely AMAZING!!!
Magnetmotorman 2 years ago
I dont know if anyone is aware but the spinning magnet is also turning do to airflow from big disc... its not all magnetic, diamagnetic, supernatural... whatever
fairlanejay 2 years ago
I know why this work. I tried once to let a magnetic ball fall through a aluminium pipe and the ball fell very slowly. I realized that aluminium is a litle bit magnetic. YOu cand read that too. Even copper is a little. Because of the big mass of the flywheel are more magnetic particles in the wheel so they can move the magnets. So alu kind of acts like iron, but much less atraction force to the magnet. Thats what I know so far...
consti11 3 years ago
there is NO attraction olny repulsion. It does not matter which pole of the magnet that is facing the disk- it olny pushes the magnets away.
whalespitindustries 3 years ago
I havent read any of the other comments, and Im not sure what this video is supposed to be showing but I just had to comment on consti11's idea that copper and aluminium are magnetic and can therefore slow a magnet falling through a pipe of said material. He's right that this will work but he's wrong about the reason.the magnet slowing is because the pipe (aluminium/copper) are conductors, which create electricity when a magnetic field is moved through it.Lenz's law slows mag w/drag like effect
frankensteinmoneymac 3 years ago
kinda lame if you input the energy with a power tool
truvak 3 years ago
Questions
1 dimensions of the large disc
2 type of magnets used
3 if left how long has the unit run for
4 can you give information so the experiment can be repeated
CraigColliass 3 years ago
OK, now put it to use and generate electricity with it. Can it sustain rotation with a slight drag to turn/spin an armature to provide electricity or does it just stop?
Let me know.
johnnyboypdq 3 years ago
I was searching for vids with the keyword= maggots,
AND I GOT THIS KRAP
DancingSpiderman 3 years ago
wayyyyyyyyy too long sentences
Golith14 3 years ago
I shall call these non-considered forces "magnetism"
The wheel still has magnetic lines of flux, strong enough to effect the more powerful magnets of the smaller wheel.
The earth and the moon operate on tidal magnetics in a similar way (thats actually pushing the moon further away).
madcapHPS 3 years ago
Maybe there are steel reniforcments in the wheel? what knid of wheel is this? even if so the duration of the spin seems pretty good
digitalenigma00 3 years ago
I still haven't thought of a practical use of what you found, but I think it is very interesting that a non-magnetic material interacts with magnets that way. Keep digging, there's tons of things yet to be found. :)
clavaque 3 years ago
have an open mind
No you have confused and open mind with an empty head. You have bi neuron disconnect disease
fizzguts 3 years ago
Seems to me that you've wasted far more energy defending your theories than can be stored by your flywheel :)
mjoemoon 3 years ago
what we have here is a failure to investigate! and/or read- I haven't defended anything but the facts: 1.have an open mind (or S.T.F.U.) 2. dont assume anything (or just think you KNOW) 3. go ahead and try it-you dont gotta BUY it. 4. I'm right (go ahead and explain it to me then (While your at it- Is gravity a particle, wave or what?) oh sorry textbook doesn't cover that yet does it. BUT gravity sure is everywhere now isn't it-regardless of my defence of it(or not)that and the fact this is fun
whalespitindustries 3 years ago
problem is that any force will slow or stop the spin. Therefore there is no torque. How can you make a motor out of it?
Best that I can see is that you make a generator out of it to recharge a battery, and run a real motor off of the battery.
pkrska 3 years ago
nice idea of free energy
PRODVDi 3 years ago
nice idea of free energy
PRODVDi 3 years ago
What? You replied to me but did not realize the problem?
pkrska 3 years ago
What is the much larger wheel from? Can it come in a smaller size while still achieving the same results if not better?
cdowell1976 3 years ago
an engine built like that made to sustain something serious is far too weak, and the magnetism even from permanent magnets would fade far quicker.
RemiusTheAwesome 3 years ago
you are stupid you know. why the fuck
cm250fine 3 years ago
Why the fuck? Because eye sea what eye see. And I know what eye know. I'm stupid? Your the dumb fuck that doesn't have an open mind. Make one then get back to me.
whalespitindustries 3 years ago
Im sorry one fo my dumb ass friends was one my computer and typed that shit in.I love this stuff myself
cm250fine 3 years ago
Thank you, I had a hard time believing the comment after seeing your reasearch into HHO
whalespitindustries 3 years ago
you are stupid you know. why the fuck
cm250fine 3 years ago
A flywheel that heavy on smooth bearings would spin for a very long time, even with out the magnets...
nasanction 3 years ago
How do you figure? Is there something you know & are just hinting at? Shoot me an email here to my account. I'm interested.
cdowell1976 3 years ago
scam
leeroyjenkinsii 3 years ago
yes the physics they teach these days is certainly a scam, but what can you do but look into, and verify things yourself.
whalespitindustries 3 years ago
Sorry, I hate having to be so sarcastic! What or How or even Why could this be a scam? People like you really need to open their minds-maybe even start with opening your EYES. There is NOTHING even REMOTELY scam like in this---whale whatever you want to lable it----gift, to any and all who have inteligence enough to know that it is truely a GIFT to all mankind. Thank GOD for leaving this information here for us to find and re-learn. Michael LaGrow whalespit at inbox com
whalespitindustries 3 years ago
One of the most interesting displays of eddy current that I've seen in a while..
It's the principal that you move a magnet across a magnetic or non-magnetic material and the magnet excites the electrons in the opposing material, just like wire in a generator armature winding.. When you excite the electrons the current it induces in the non-magnet generates an electromagnetic field that interacts with the magnet, usually causing a dynamic braking affect..
klexn 4 years ago 8
Yeah, wow you could probibly power a small fan with that, not a car...
PinoX7 4 years ago
this reminds me of a motor found in an old russian pickup player. it had 2 coils witch are known to produce magnetic fields, they where static, but the interesting thing was that the rotor was pure aluminum. i loved to play with that...
encodion 4 years ago
vey intersting but what actuall is happeninge here could you explain maybe? thanx
leviterande 4 years ago
what is the wheel made of and the magnetic cross? does it turn by itself? how long will it turn? where did the parts come from?
troyboy76127 4 years ago
try dropping a neodymium magnet through a copper pipe and you will see the light.
SlavaVB 4 years ago
oh dear, oh dear, oh dear. The metal doesnt have to be magnetic, it only has to be conductive which magnesium is. ANY conductor moving through a magnetic field get a current induced in it. This in turn creates a magnetic field in the conductor. Given that the magnets are on a rotating spindle as the magnetic field created by the back emf interferes with the permanent magnets it causes them to spin. The pattern of hte magnets is irrelevant. The field just has to be there.
LukeSkyscraper 4 years ago
Since current IS magnetism, it is unnecessary to think in terms of recursively converting magnetism into current and then back into magnetism. It seems like some text books were written to confuse this point, causing us to consume mental resources in an endless loop.
themanyone 4 years ago
i love ya!
mojokiss 4 years ago
Do some A level physics and you will understand this is nothing more than the effects of a few eddy currents, the swastika has nothing to do with it.
DandHProductions 4 years ago
Digg deeper than level a physics and you will find you know nothing about "eddy currents" lenz law or lorenz law is not explained by modern physics. And the four magnets ARE stuck together in a "swastika" and it does have somthing to do with it.
whalespitindustries 4 years ago
If that is true then I am dead, I have been on many roller coasters that use eddy current braking to ensure the safety of the passengers, it's exactly the same principal of a magnet moving past a non magnetic, conductive material and being pushed back by the current it induces in the conductor.
DandHProductions 4 years ago
And I suppose your not flying away into space because you dont know what gravity is either? No really, I'm sorry for the sarcasm but I have done reasearch and the term "eddy currents" just doesn't explain "why" or "what" is happening. If the disk is spinning it olny "pushes" the other magnets away at no time is there any attraction to either the N or S pole.
whalespitindustries 4 years ago
No attraction is required. What is happening is that the magnet is inducing a current in the disk and usually this would cause a force in the opposite direction to the rotation of the disk.
Newton's third law now comes into play. The magnet, exerting a force on the disk against the direction of rotation, experiences a force in the same direction of the rotation, causing it to move as if it were a gear meshed with the disk.
DandHProductions 4 years ago
Just for clarification A level physics isn't the same as a level A in physics, it's what we Brits do before university.
DandHProductions 4 years ago
Just for clarification.....You haven't explained----ANYTHING. Go ahead and look it up. Modern physics has the words "eddy" "lenzs"ect. but NO idea WHY OR HOW. Newton may very well have been ---whale, WRONG. Have you looked into any "new" research, like string theory for instance. Someones wrong because math of the BIG does not play whale with the math of the very small now does it?
whalespitindustries 4 years ago
I have explained it to the same extent I could explain that an electrical generator works because the movement of the wires through a magnetic flux causes the electrons to move in the wire generating an electric current. In biology we don't know the exact mechanism of some metabolic pathways but we can still say that they are there because you can measure a response in the cell to the addition or removal of certain compounds.
DandHProductions 4 years ago
Just because the exact mechanism isn't know that doesn't make a supernatural explanation anything less than the pile of bull it is.
DandHProductions 4 years ago
What is supernatural about GRAVITY. (other than you dont have any idea (of your own) what it (gravity) is. Oh sorry your basing your argument without having seen the material I will (and have sent) to EVERYONE who has asked. Please send me an email address that eye can send attachments tooo.....I maybe I can provide enough information to show you that ---NO Sir, I am not "tripping"
whalespitindustries 4 years ago
Open an old hard drive power it up and hold a magnet over the spinning disk, it floats, same thing here. the mags induce a field in the metal... take a neo magnet and let it slide down a pice of copper or alumin. on a great slope, it's cool how it moves slowly down it.
drphu 4 years ago
Eye have, and was surprised that the old hard drive WILL start and turn the very same rotor package thats in the video.
whalespitindustries 4 years ago
it doesn't do create anything
drphu 4 years ago
History has been waiting for you all this time. All the hard working professors and scientists who wasted their time in the best universities in the world should bow down to your invention and your deep knowledge of magnets and camera positioning. Genius !
OrlandoSF 4 years ago
Thank You, All is for mankind when the time was right--right now. I am grateful for everyones intrest it has helped motivate me and reassure myself that I do indeeded SEA WHAT EYE SEE. I have and will continue sending as much information to anyone who asks. Just send me a message with an email adress that I can forward attachments to and I will forward all of my notes to any and all. whalspit at inbox dot com.THE GOD, HAS BLESSed US ALL. I'm NOT TRIPPIN'
whalespitindustries 4 years ago
It should be going 3 to 5 years if you are claiming more energy than out, lol.
perseidsst1862 4 years ago
Have you tried adding the other 3 mag rotors in the drawing? Could become even more amazing! Very interesting.
PS for all the people who want everything to fit into their "Laws", keep in mind there was a time that there was a 'Law' that said the Earth was flat!
RockManAU 4 years ago
Anybody can try this, it is a common trait of high strength magnets over aluminum. If you get a peice of glas and put a truly smooth peice of flat aluminum on it you can quickly pass a magnet close to surface in sweeping motion and the block of alloy will slide.
441rider 4 years ago
Paddlewheels are great get an alternator hooked up.
441rider 4 years ago
Eh... Im not so amazed to see most of the effect being done by air drag.
Paxmax 4 years ago
I asure you NONE of the effect is from air.
whalespitindustries 4 years ago
Hahaha, ignorant fool.
Move your hand buddy, do you feel that sensation on your skins surface? What do you think it is?
What makes you think that spinning wheel should be exempted from that effect?
It's not suspended in vacuum dude.
Paxmax 4 years ago
I assure you paxmax, Yourte idiot.
It's clld eddie current. It's a current you jackass. Not air. Yor very existance is a disappointment to the human race. Go jump off a building!
FLABERGAG 4 years ago
its a disk you stupid! its not a fan!
joseamirandavelez 4 years ago
A flat disc does not push any air... You can easily see that it rotates even at slow rpm's.
joseamirandavelez 4 years ago
ıs there an electric motor that the flywheel take the spining power. Or only magnetcfield is enough for spininig
roninn366 4 years ago
From what I have seen, there is a spindle with magnets attached secured to skate wheel (for the bearings). Secondly there is a large non-magnetic flywheel free spinning on its own spindle and bearings. Using a grinder tool to 'spin-up' the flywheel causes the magnet rotor to spin in sync throughout the flywheel process of using up its energy via friction.
AdminOnDuty 4 years ago
Here is a good test: Rig up a bicycle generator to your magnets and power a bicycle headlight. Spin the wheel up and see how long it will run with the light on, and again with the light off. Leave everything else in place and just flip a switch to connect the light. This will tell you how much load you can put on your device and result it has on its inertia. If it looks promising, then power a small dc motor instead of the light and attach it to the flywheel to drive it :)
AdminOnDuty 4 years ago
The torque on the rotor is incredible. loads of load lol
whalespitindustries 4 years ago
You can do this test easily with a rubberband driven off the magnetic spindle to the generator.
Give it a go and let us know :)
AdminOnDuty 4 years ago
From what I gather in the posts the magnets are being turned by the flywheel with little or no degradation to the energy in the flywheel. However, the fact that the wheel can be stopped using a stationary magnet confirms that there is a magenetic field being generated in the flywheel that has the opposite polarity of the magnets.
AdminOnDuty 4 years ago
I assure you that the orientiation of the magnets does not matter. The spinning disk only pushes, never atracting it pushes the N pole of the magnet and it pushes the S pole of the magnet.
email me I'll send you more
whalespitindustries 4 years ago
How long will it run on it's own? How can I build one?
bass4grace 4 years ago
i find this interesting
TeslaVoltageInfinite 4 years ago
whatever eddy current is wild to watch but thats about it time check
timgebhart 4 years ago 2
what i dont get it what time is it by the way
timgebhart 4 years ago
I timed how long it continued to spin 28-31 mins
whalespitindustries 4 years ago
take away the magnet spinner and see how long it spins then!
AustinSwill 4 years ago
one more time, after it is at full speed-the presence of the rotor package does NOT SLOW THE FLYWHEEL DOWN AT ALL. no magnets spin time 30-42 mins. w/magnets 30-42 mins. And useing just one magnet I can bring the disk to a full stop in under 4 mins.
whalespitindustries 4 years ago
The magnetic rotor has no load, and it diamagnetically pushes the wheel such that the only loss is in the skateboard bearings as far as its concerned. This loss compared to flywheel energy is probably less than 1/4 turn. The real test will be when the magnets are attached to a load as I have suggested.
AdminOnDuty 4 years ago
How do you get around the laws of thermodynamics? ;)
joebot1 4 years ago
WOW! you can get around the law? How?
whalespitindustries 4 years ago
er, what?
Your trying to build a perpetual motion machine with magnets right?, it can't be done!
joebot1 4 years ago
maybe not. But the technology can be used to power an hybrid motor... when it starts to slowdown you can rev it up just like he did with the grinder... It may be difficult to use this on a vehicle because of gyroscopic accelerations... or maybe not... who knows?
joseamirandavelez 4 years ago
So the magnets actually make the wheel spin longer than it would with the inital push from you alone?
jibbity99 4 years ago
no but they dont slow it down it spins equal amount of time w/magnets or w/out
whalespitindustries 4 years ago
is there a logical explanation to this? I mean if it works it is great but how can you explain the magnets are rotating without any force at all (given the flywheel is non magnetic). But actually you can see the magnets moving as if there where a magnetic field...
joseamirandavelez 4 years ago
send me an email address that I can send attachments to and I will send all info upto date
whalespitindustries 4 years ago
awsome a littel more work on it it will power your house im gona build one
rc51horndog 4 years ago
Everyone knows --its "lorentz law" or "lenz law" so just accept that and be done. Funy thing though when you get right down to the "physics" of it, modern physics is at a loss to explain either of these laws
whalespitindustries 4 years ago
gravity has nothing to do with it, as this thing would work better in outer space as it would inside a gravity field. Also, the swastika has nothing to do with it's operation, well other than add to the seemingly mysteric way it operates. sorry man, theres nothing religious, magical or otherwise abnormal about this, this principal was even used on the brakes of the car used to attempt a new land speed record
Fentanyl3 4 years ago 3
this isn't as amazing as it appears, the magnets are simply inducing eddy currents into the large rotor and those eddy currents in turn create an electromagnet the then creates an induction motor of sorts. that where and induction motor gets it name, by a magnetic field INDUCING a current, and repulsing magnetic field into the rotor, you have created nothing but a simple inefficient induction motor
Fentanyl3 4 years ago 2
You come off as insane, but this is fucking cool.
keep doing whatever crazy "translation" shit your pulling
CKC90 4 years ago
Hi,
Here's the explanation of this phenomenon : when any conductive material is moved in a magnetic field (or when the magnetic field changes with time), Foucault's currents are induced in the material. In turn, these currents create a magnetic field (like an electro magnet). The new field is opposed to the field which created it, which creates a repulsive force (for a more thorough explanation, look up Lenz's law).
twilight1138 4 years ago
Then wouldn't it just generate the same amount of magnetic field or maybe less? then the magnets would not rotate...
joseamirandavelez 4 years ago
Super cool Big Daddy!Check mine out.
tracmag 4 years ago
This is how old bicycle speedometers worked, they had an aluminum cup that was rotated by your wheel.
ktn11355 4 years ago
watch?v=wt3It6d1o_Y&mode=related&search=
RBare2007 4 years ago
Ok, I'm back because I'm intrigued, did you time the longest run, if so how long?
RBare2007 4 years ago
I have run the wheel up to speed and timed it (NO mag rotor) 35-38 mins, run it up to speed again (w/ mag rotor) 32-36 mins. And I will mention that I can take a single neo magnet and bring the flywheel to a stop with out touching it in about 2 mins. send me an email address that I can send attachments to and I will send you as much info to you or anyone else who would like to experiment. whalespit at inbox com
whalespitindustries 4 years ago
I would hazzard a guess that the large flywheel is aluminium?
which supports my theory on eddy currents, also the reason your single neo mag slowed it down, referred to as "eddy current breaking"
Been doing a little experimenting of my own concerning the same thing, eddy's are the bane of electric motors and transformers, but if you've ever got the induction motor from an old record deck, that actually utilizes eddy currents to work.
RBare2007 4 years ago
How old of a record deck, what brand and how? Thanks for the info. I think the fly wheel is magnesium. I cant seem to measure these "currents" they are not magnetic. The little infromation I can find on this was termed "a motional electric field" by a professor at Berkeley and always is coupled with gravity
whalespitindustries 4 years ago
Magnesium does have some of the properties of aluminium where it comes to magnets, but you will find a lot of non magnetic metals will be affected by eddy's, one interresting experiment is a copper tube about 12 inches long with fairly thick wall, drop a neodymium down inside and it floats to the botton, not drops as expected.
the records decks would be something out of the 60s 70s 80s, the fan in my microwave uses an induction motor.
RBare2007 4 years ago
All I can say is look up "eddy currents"
Good video, good demonstration, thanks for sharing.
RBare2007 4 years ago
actually, I have built one, diffent morphology though...as for my comments, chill-out man, did'nt know you were so sensitive.
tetekofa 4 years ago
Can u hook it up to some electricity measuring device and see how much power is being generated?
AngryRam 4 years ago
I C
tetekofa 4 years ago
Build one yourself. Before you continue to ridicule somthing you don't understand. It's not magic. Modern Physics does not play well with gravity.
whalespitindustries 4 years ago
thats true...
joseamirandavelez 4 years ago
..mikes tripping, look ma..no hand..wow...huh..slow..note.. it does'nt matter..which direction..grinder..time check...uh..travis?? idontknow..uh..about five-o-clock..thats close enough..
tetekofa 4 years ago
Heres the deal when I filmed this video it was with my cell phone and at the time had NEVER visited you tube. Travis was just someone standing there that I asked what time it was. And was filmed for my friends and was never intended to be viewed by the general public. I am serious build one, then, objectivly and with an open mind tell me that I am "trippin' "
whalespitindustries 4 years ago
Dear whalespit,
what's wrong with your magnetism detector?
tetekofa 4 years ago
Nothing and I DO indeed have a magnatism (cell sensor) detector.
whalespitindustries 4 years ago
in your opionion whalespit, how does one "deflect gravity"?
tetekofa 4 years ago
By the way, i don't know about Mg but for sure Aluminium is turning magnetised when span--the spinning polarises the molecules. May be the same thing happens to Mg which may add to the interaction with the other (crossed) magnets.
8R8 4 years ago
Yeah but if that was true it would be pulling and pushing. It's only pushing! What your saying isent phesiable.
P.S. this is roy, Im on my friends account. lol
superman4346 4 years ago
Thanks for sharing! Thing is that, not only magnets, but mass also accumulates energy like a spring. Many experimentors try with light wheels with no mass which works more rarely.
Type search on Reidar Finsrud: his stuff runs months on end...
8R8 4 years ago
First I make no wild claims in the video or discription all the video is is a showing of a strange "effect" the disk does not "run" by itself (in the video I actually use a grinder to spin the flywheel) BUT it does not ever "pull" the magnets it only "pushes" them (it does not matter which pole is facing the flywheel) and after further experimentation it is my opinion the the disk is "deflecting" GRAVITY. I can NOT observe or detect ANY magnetism or electricity from the flywheel.
whalespitindustries 4 years ago
First I make wild claims in the video, disk does "run" by itself, a strange "effect". "pull". "pushes". it is my opinion the the disk is "deflecting" GRAVITY. I can NOT observe or detect ANY magnetism or electricity from the flywheel.
what U said.
tetekofa 4 years ago
You cannot observe any magnetism from the flywheel (how do you expect to "observe" it?) but i tell you for a fact that in the case of aluminium it gets magnetic when span. Put iron peelings on a flat surface above the turning flywheel and see if they regroup (without other magnets around!)
8R8 4 years ago
That is Exactly how I came to the conculsion I held a plexiglass tray with iron filings above the flywheel/rotor combination to try an observer the flux interaction between them and there was NO FLUX above or coming from the flywheel. It is my theory that it is not some strange new power from the "other side" but simply gravity being "thrown" to the side of the flywheel.
whalespitindustries 4 years ago
good theory look up the properties of that material to interact with the aether,(graviton energy feild) and the m theory might have to do with gravity!
wildhart7 4 years ago
I was going to comment, but not going to waste my time. was going to say "when it runs for 42 days un-assisted, then it's not a joke, until then..."
tetekofa 4 years ago
So far as telling the navajo their religous story is evil. Well, if we can tell a murderer he is evil. Then I have all the right in the world to tell the navajo that they are believing in evil demonic forces that wish to control them and that they need Jesus. What they do with that is their choice. You cannot say all religions are the same or right. Jesus claimed to be God incarnate. If you wish to continue this discussion I will gladly do it via e-mail.
Bellski717 4 years ago
Please send me an email adress that I can send attachments too and I will send you more pics and more of my "theory" whalespit AT inbox. com
whalespitindustries 4 years ago
They would write the big picture. Which Genesis 1 obviously is doing. Then they would start again and fill in details. We see this style of writing throughout ALL of genesis. You don't believe. Go ask an expert in ancient hebrew at a nearby university.
Bellski717 4 years ago
Before any rain had started. Also, you are incorrect in assuming that Genesis 1 and 2 are seperate accounts. We know know from archeaological finds of ancient babylonian and simialer cultures documents that this was how ALL cultures of that time wrote.
Bellski717 4 years ago
The mists in gen 2 are not speaking of anything divine. If you simply read the passage IN CONTEXT. You will see it is speaking of the HYDROLOGICAL cycle.
Bellski717 4 years ago
Ok, you are making the DEADLY assumption that if something is spiritual then that means it is good. The Bible clearly states that satan and his demons pose as angels of light. I would spend time to actually quote, but, I don't need to. Because it is there. I believe i understand where your duality idea in the bible comes from. After doing a small amount of research.
Bellski717 4 years ago
The laws of thermodynamics is completely against evolution.
Bellski717 4 years ago
I am sorry you can't SEE what eye SEA.
whalespitindustries 4 years ago
And go ahead and tell the Navajo Nation that The Sand painting "Whirrling Logs" is evil, Yes, Usen were sent here to teach us, and show us to be rightous to one another. That is NOT EVIL, no matter how you look at it.
whalespitindustries 4 years ago
Well, it is somewhat interesting. Most likely Lorenz law at work. Nothing special. I am really struggling to see your "technical" drawing theory. Nor can I understand this duality you speak of. Show me that in Christianity. Actual biblical chrsitianity. Show me dualism in the bible. I have read it 4+ times. It isn't there. Any technology the ancients had was given to them undoubtedly. Not by aliens, but by demons posing as aliens. Evolution is not fact.
Bellski717 4 years ago
What it the longest it has spun after you give it a simple push? Thanks!
k4zep 4 years ago
this flywheel is not as balanced as others i have BUT I have had this one going 20 mins (I have another all steel wheel going fo 42 mins)
whalespitindustries 4 years ago
thank you a lot, which polarity does the magnets point to the wheel???
jorgerojo73 4 years ago
it does not matter the spinning disk PUSHES and never "pulls"
whalespitindustries 4 years ago
Genius!
FLABERGAG 4 years ago
but it looked plenty magnetic when you slowly spun it...
intj123 4 years ago
yes it did and is-WHILE IT IS SPINNING, at slow speeds the effect IS present BUT the disk does not become "magnetic" the "force" from the disk olny PUSHES there is no atraction is pushes equaly on BOTH magnetic poles
whalespitindustries 4 years ago
So around that flywheel is aluminum?
And there's a spinning magnet.
They pro-pell each other?
FLABERGAG 4 years ago
you're telling us you were not able stopping it by hand???
elfranz 4 years ago
no, just that once disk and magnets are up to speed the flywheel will continue to spin as long as it would have with no magnets present
whalespitindustries 4 years ago
please tell me the setup of this device..what kind of parts are used..i see the inlines wheel..and the magnets (how are they lined up?) and the big wheel?? is that all??
kallstrom74 4 years ago
flywheel=old excercise bike (non ferrous)magnesium
magnets+hot glue+ hollow brass tube(shaft).25x2x1 neo
power=small grinder w/wire brush
whalespitindustries 4 years ago
I agree with Btentzer, the interaction between the magnets and the flaywheel can be explained by the lorentz law. A current is induced in the conductive surface by a changing magnetic field. The current has its own magnetic field, which is sometimes referred to as a counter magnetic field. I do suspect that there was an advanced civ a long time ago though. IEEE uses the yin yang symol to represent AC. lol who know, maybe they know the secrets of mans forgetton history.
seneca67 4 years ago