my motherboard supports the Intel G31 g33 overlock if any of 3 or 2.8 ghz? is to avoid bottleneck with my hd 4670 .. oh and another thing .. I have 300 watt .. that's a problem?
SuperPi is shit for measuring CPU performance. It's not well-threaded. Use a multi-threaded application to see more noticeable performance differences.
its a DG33BU classic with 1333FSB but i never got over 2.2 it just crashes like a peice of shit..i think that its caus i already crashed the processor once.-_- i must say i was noob but now im ok on that. still ill go with a core 2 quad
@dnzota yea i got the box of the processor its realy written core 2 duo and i know its my mobo i discovered it cant do anything good i cant even cahnge the clock in bios i just orded a new one with a 17 from tigerdirect thnaks for the reply tho
HELPP!! I dont know if someone will help me but any way I have the same prosesor but one of my cores (core 1) is at 1178.3ghz and hould be 1800ghz core 2 is fine but I want to overclock it t 2.5-2.8ghz is my cpu dying or what!!!!!
Hmmm... yea it does have a little bit of that problem, but nothing close to the worst i have seen. It has pretty good contrast and looks good and is considerably cheap (this shows in the backlight leaking ;D).
P5NSLI, i have the board too....its a nForce 570i SLI mobo....which is claimed that its not good at overclock at all....but you can try find some guides....they say that this mobo cant go over 300FSB
Great job but might try to set your NB to 1.40v or so? Command rate for RAM can be set at 2T if you have the option all looks good from here other then that.
I think the command rate is set to 2T when its on auto but im not sure. I havent set the NB because it seems to work better on auto dont know why maybe its because the voltage regulators make it run at higher voltages than max but i would have to check with a multimeter.
Song name?
inhuman82 3 weeks ago
Nice,atm i have mine E2160 at 4,16 Ghz Temp are -50C.= -122F
jeffreyamd 1 year ago
@jeffreyamd Liquid nitrogen cooling???
hyperdude144 8 months ago
@hyperdude144
No just air with CM V10,and i had my case in a space with -2 Celsius room temperature.
But if i oc more its would not start further then the bios.
Nice tho GL
jeffreyamd 8 months ago
This has been flagged as spam show
It's true, I make around $15 a day with AdSense from my blogs... It's easier to use the technique I found at ez-casino(dot)com, though...
margotChasemkon 1 year ago
my motherboard supports the Intel G31 g33 overlock if any of 3 or 2.8 ghz? is to avoid bottleneck with my hd 4670 .. oh and another thing .. I have 300 watt .. that's a problem?
gracias
xzisaak 1 year ago
How did you overclocked your CPU?? What did you changed on bios settings?
pramedic911ems 1 year ago
yo guy. i have the same bios screen. but it wont let me do anything to overclock it. do know how to get it overclocking because myn wont let me.
GamerGuy320 2 years ago
I managed to keep stable this cpu at 3400 but with no visible improvment from 3100... superpi had the same results in 3100/3400 frqns.
dnzota 2 years ago
SuperPi is shit for measuring CPU performance. It's not well-threaded. Use a multi-threaded application to see more noticeable performance differences.
Atheismrulez 2 years ago
Muito bom o video parabéns.
Olha qual a temperatura que o seu cpu ficou?
italoeapulso 2 years ago
i have a 1.80ghz C2D E2160 and i cant overclock it more than 2.2 ghz :( i should go for the 3 ghz one
damien345 2 years ago
what motherboard you have? I have P5N-D (nforce 750i) and uses 1333FSB and 1.5V and i achieved 3Ghz easily
kongbingyuan931202 2 years ago
its a DG33BU classic with 1333FSB but i never got over 2.2 it just crashes like a peice of shit..i think that its caus i already crashed the processor once.-_- i must say i was noob but now im ok on that. still ill go with a core 2 quad
damien345 2 years ago
it's dual core not core 2 duo. your motherboard is the problem.
dnzota 2 years ago
@dnzota yea i got the box of the processor its realy written core 2 duo and i know its my mobo i discovered it cant do anything good i cant even cahnge the clock in bios i just orded a new one with a 17 from tigerdirect thnaks for the reply tho
damien345 2 years ago
HELPP!! I dont know if someone will help me but any way I have the same prosesor but one of my cores (core 1) is at 1178.3ghz and hould be 1800ghz core 2 is fine but I want to overclock it t 2.5-2.8ghz is my cpu dying or what!!!!!
KetiNgSaaG 3 years ago
and then*
rgo872007 3 years ago
how can i get in to this menu
archvizerdm 3 years ago
ROFL!!!!!
When you computer is starting, it say BIOS or some shit like that and the press F2, and you got this menu.
Sorry my poor English.
rgo872007 3 years ago 2
Nice nice, bad screen tough! LG Flatron the best blacklight leaker on the planet
schemerzot 3 years ago
Hmmm... yea it does have a little bit of that problem, but nothing close to the worst i have seen. It has pretty good contrast and looks good and is considerably cheap (this shows in the backlight leaking ;D).
overclockerfx 3 years ago
you havent saw worse ones lol
kongbingyuan931202 2 years ago
I've got a P5NSLI...
Do I have to do everything in this vid if I just want to Overclock my E2160 to 2.6GHz (air cooled)?
zackunderscorefalcon 3 years ago
P5NSLI, i have the board too....its a nForce 570i SLI mobo....which is claimed that its not good at overclock at all....but you can try find some guides....they say that this mobo cant go over 300FSB
kongbingyuan931202 2 years ago
nice job dude
xdirt1 3 years ago
Great job but might try to set your NB to 1.40v or so? Command rate for RAM can be set at 2T if you have the option all looks good from here other then that.
Rick Arter
RickArter 3 years ago
I think the command rate is set to 2T when its on auto but im not sure. I havent set the NB because it seems to work better on auto dont know why maybe its because the voltage regulators make it run at higher voltages than max but i would have to check with a multimeter.
overclockerfx 3 years ago