Tether Android to Xbox wirelessly (mtu phone settings)

[Hardcorecaddy001]

So in conclusion after everyone saying they have the right output to change their and everyone else saying it doesn't work, what does work? None of these work on anything apparently. Is there a real way to open a phone's mtu?

[MillzyNigga860]

Anyone her that screaming in the backround

[DJRoastPrince]

Does it wrk for HTC EVO 3D

[9snaga]

Is there any way to do this with a non-rooted phone? Anyone, PLEASE I have an HTC desire HD

[drewscs]

@9snaga aye 2nd this 

[op116]

Sumcd

[op116]

It says since is dinied

[cmalloy24]

My Bionic does not have the file 'PPP0' in path /sys/class/net. Where can I find the MTU file location?. Can anyone verify the correct path and file name for the rest of the Bionic crowd? thanks.

[forgetthename16]

what if you have the droid citrus? what would i need to type then?

[angrym0use]

@forgetthename16 you have to remember I posted this video a full year ago...

[hahaveryfunnyOHYEAH]

so how do the games play online? are they smooth?

[ransomdev14]

Can you just use 3g mobile hotshot?

[forgetthename16]

@ angrym0use

i thought it was a good vid. i also seen you had barnacle wifi tether next to wireless tether, ive tried to get wireless tether but it wont work on my phone. (android 2.1) ive used barnacle for about two months and i have never had a problem with connecting to XBL as well as playing online. rooting your phone, i just used z4root. which i downloaded from 4shared.com

[Arev0]

cant you just use dr tcp

[angrym0use]

@Arev0 on a phone?

[Arev0]

@angrym0use the way I did was a little diffrent I used a Pc my mistake

[computerhacker68]

bad vid

[angrym0use]

@computerhacker68 for content or presentation? it was my first video I ever put on youtube, so I didn't expect much from it

[hahaveryfunnyOHYEAH]

@angrym0use how did the actual gameplay run online? Was it smooth?

[angrym0use]

@YouCheckinMyBeats what error are you getting now? All I can say is just restart the app for tethering or restart your phone. Keep trying....

[0105760]

I just make my PC connect to.my galaxy s 2.2 hotspots then plug in Ethernet cable MAKE SURE U HAVE NETWORK SHARING that's it

[0105760]

I think I might get Droid bionic

[Ghosstt2010]

i didnt watch ur whole video so did u have to connect ur laptop to ur ps3 at end? b.c i found a way on ps3 how to do it without having to connect ur laptop to ps3

[angrym0use]

@Ghosstt2010 Congratulations. you should have watched the whole video...

[larissatea]

lg ally by the way

[larissatea]

when i pull up the terminal emulator and type su and enter it reads su: permission denied how do i get arounf this error? sorry to bother you man

[staticbg]

@larissatea ur phone needs to be rooted

[Robertsmith2002]

Ass, thanks anyway

[Robertsmith2002]

Xbox 360 s????? In laymens you mean slim ????

[angrym0use]

@Robertsmith2002 yes, that is what I mean. sorry I used technical/official terms and hurt your brain. I am truly sorry for this indiscretion

[Ghosstt2010]

how do i do this for ps3

[angrym0use]

@Ghosstt2010 I've never tried it with a PS3. but considering, that the video only shows me changing the phone and not the xbox, then I think it should be about the same way. All you need is a way to connect the ps3 to the wireless your phone is broadcasting.

[TechWareTutorials]

hey i get no lag which is great and didnt have to change mtu settings but one thing is i have a moderate nat and im wondering is there a way to open my nat using terminal emulator or something

[moderngears3]

Does anyone know if the htc evo can play xbox 360 games online without lag with the wifi tethering

[VikingNightmare]

Hi, could you please tell me where can i find a list of commands for the android terminal emulater for galaxy S, I am most sure that this is not a standard linux terminal and thus many things could differ, also asking this since a friend requested this from me and google just doesn't seem to turn up the relevant stuff. Just a list of commands available in the android terminal emulater for galaxy S. THNX in advance

[angrym0use]

@VikingNightmare Beats me. I had to figure all this out on my own. As far as I know, there is no guide or list of commands. Just look at linux commands, type it in, and see if it works. Sorry this is all the advice I can give, but I'm just a lowly college compsci major

[VikingNightmare]

@angrym0use thnx for your reply, I have graduates computer science, but it is always better to ask, since it is the phone of a friend, i don't wanna render it useless... :D

[angrym0use]

@VikingNightmare Good idea, better to be safe. Good luck with it!

[rvaldez420]

how do u update xbox live its not letting me! please help!

[angrym0use]

@rvaldez420 if you're connected correctly, it should just do it. it may take a while since it's off your phone if it's a large update, but otherwise there should be no problems.

[gs0829]

None of it worked at all for me, Im using a T-mobile Mytouch Slide 3g. And when I type cd pdp0 (or cd ppp0) they both say "Cant cd to pdp0 or ppp0" then I typed "ip link list" and a bunch of stuff came out, so then I typed "Ip link set dev pdp0 mtu 1500" but it still didnt work at all, wat should I do?? Instead of Xbox 360 im doing it to a Ps3 slim 120gb... Please help thank you.

[angrym0use]

@gs0829 if you can't cd to those, then they probably don't exist on your phone. the stuff that comes out of "ip link list" is important. that's how you tell which one is the data. "pdp0" is for the galaxy S. "ppp0" is for the droid. yours is obviously something different. try "ip link set dev pdp0 mtu 1500" but replace "pdp0" with whatever you see at the bottom of the list when you do "ip link list". I've never used a Mytouch. hope this helps. let me know what happens or if you need more help

[gs0829]

@angrym0use Ok thank you man, I will let you know what happnds, thanks again..

[juniorcarreon91]

hello i have a samsung vibrant rooted and ive followed your instructions but i keep on getting the mtu message. is there something that has to be done differently? any help id appreciate it.

[angrym0use]

@juniorcarreon91 I haven't had a chance to try this with the vibrant. when you type "ip link list" it should show you all the connections and the mtu for each one will be in there. that's how you can know it works.

I say in the video that my data connection is called "pdp0" and that the moto droid is called "ppp0". maybe yours is called something different?

that's about as much as I can help without further info about the problem

[abillich]

@angrym0use I also have a vibrant and followed your video but i still keep getting the MTU error from xbox live. in the list it is pdp0, same as the captivate. i tried typing "ip link list" but it gives me an error saying that ip doesn't exist. maybe i'm typing it in the wrong place or the wrong way? also, i saw one of your comments that said you typed "set pdp0 mtu 1500" instead of "mtu=1500". i tried it both ways to no avail. any other ideas?

[angrym0use]

@abillich I will try to get some time with a vibrant and see what I can do. I'll try to post a solution as quickly as I can, but don't hold your breath, I'm a college student. in the meantime, just keep searching and let me know if you find anything

[abillich]

@angrym0use Hey, just wanted to let you know i got it working for t-mobile on the vibrant. I talked to one of my friends who is a computer networker and he works alot with linux. Instead of typing "mtu=1500", type "echo 1500 > ./mtu", then type "cat mtu" to confirm the change. Also, that is "[period][forwardslash]mtu". I noticed you can't really see the period in there so i wanted to clarify. Please update the description if you don't mind to reflect this for all the T-mobile people. Thanks!

[Forsaken712]

i have nexus one , which originally creates a wife hotstop.. im connecting to xbox live but the NAt is strict. How to fix ?

[angrym0use]

@Forsaken712 I'm sorry, I don't know of any way to adjust the NAT type. The best I've ever gotten is Moderate. Please let me know if you do find something about it though

[pilotbrianlaggren]

hey im running into a problem i set the mtu to 1500. im able to connect to xbox live for a matter of seconds before i get an error on barnacle saying "nat restart: message too long" please help!!! input would be lovely. samsung vibrant

[angrym0use]

@pilotbrianlaggren instead of barnacle, try the "wireless tether" app. that's what I use.

[theonewingdemon]

hey man did what u said in video and no go for me still get the MTU problem i have a Samsung Captivate and followed everything set MTU to 1500 and no go (my phone is rooted)

[angrym0use]

@theonewingdemon did you follow the info in the popup (@ 1:51) in the video? that works way better and lasts. if you have tried that, what exact error are you getting?

[todjihad]

Dude you rock man! I've been asking everyone on XDA about this mtu settings and looked all the way to the end of the internet, thanks. WHat is your name on xda? I'm going to post this up and give ya credit! I'm TheToddFather. I also have a have the captivate too.

[todjihad]

@mouse Hey i thought i got this working, I use mobileAP it was disabled by att. I did do a ls and saw that my is pdp0 . However my setting dosnt stick when i apply the mtu=1500 , I also tried the suggestion ip link set dev pdp0 mtu 1500. No dice but when i look at the settings from doing the ip link list it says pdp0 1500. Is their another adapter i should apply this too as well besides the pdp0?

[angrym0use]

@todjihad I just tried it myself to make sure that it still works. when you do "ip link list" and it shows "pdp0 1500" you should be golden. pdp0 is the only one you need to do it for. If this is not working, then the error is probably not with the mtu settings. what exactly does it say when you try to get on live?

[angrym0use]

@todjihad Hey, thanks a lot! My name on xda is the same, angrym0use.

[forgetfull88]

this aint workin out for me :( i try to connect but xbox connects the disconnects... did word for word wat u did too!! moto droid 2.2 rooted (wifi tether)

[angrym0use]

@forgetfull88 I just borrowed my friend's moto droid to test this on my xbox. I just did the same thing as in the description, but instead of "mtu=1500" type "set ppp0 mtu 1500". and that worked for me. I tested it on both the 360s and the 360 with a wireless thing. please let me know if this helps.