I dont get it. All these videos showing guys working the bolt, dropping the mag, etc.
Everyone who watches these videos already knows what the little turny-turn things are on a scope, and what a magazine is, and where the magazine is, and how to extract it, and what a trigger is, and how to action the bolt.
Just shoot the darn thing and record that!
Everyone!!!! Stop already. Just shoot and record and post.
No more open close open close open close on the dang bolt. In case we've all
@kahai808 Matt Perry of Perry Custom Gun. He had a 6.5 Hart in stock so I just sent him my BA and he turned it around real quick. My action was already trued up, but he double checked everything and then coated the whole thing in Cerakoate before he sent it back. Shoots .3 MOA. GAP could rebarrel yours in whatever you like as long as they have the barrel in stock. Most people I know are shooting some sorta 6.5 or 6mm.
I have a sps tactical .308. Shoots alright. Barrel touches the stock though when on the bi-pod. SWFA 10x44 fix. Burris tactical low variety. Egw 20mn base... The last thing I want is this b&c a5 on my gun... Then Im done!..... Maybe....lol
I'm thinking of getting one of those scopes for my new Remington 700 SPS Tactical. What do you think? I had Randall do the barrel on my AR15 also! Lives in sketchy place, but he's a nice guy and did a great job.
I've watched this a couple of times. I always appreciate the way you go straight for the safety check. Very professional, exactly the way it should be done. Thanks.
@joezbackwith2gatz recoil feels like im shooting a .223. as for it being loud, i dont really know, because i use double hearing protection. its hard to tell.
@kahai808 My ARs are lefty and my Savge... Im ambi but I shoot rifle lefty but shoot pistol righty but can shoot both ways. It makes it a pain to construct a carry systems for everything. I have a video of some of my load out stuff too... I have been adding more to my "heavy Loadout system".
I getting ready to buy a bolt action .308 but i dont know what kind Ive been researching and Im looking for somthing tactical very accurate up to 600 yards and price is around 600-700
@miltnxc123 I would go with a Remington 700 sps. You can get them for around 600 bucks. I would shoot Federal Gold Medal Match 168gr Sierra Match King Boat Tail. The barrel has a 1:12 inch twist which would be good for the 168gr bullet. Dont go cheap with optics. You'll regret it if you do. Nikon, Millet, Burris... you can find pretty decent sights threw these companies
thanks for the info on the pelican case, but i'm looking at a drag bag style with shoulder straps. the brand i'm looking at comes in 40, 50 & 60 inch lengths. trying to fit the rifle pretty close, especially when its a soft sided bag. if i go with the 50 inch, i'll have way too much extra space. the case i may have to order from england, so i have to get it right the first time. thx
hi, did the Bell and Carlson add to the overall length of your rifle? have my eye on a nice tactical case (40"), and my ltr is now 39", but may want to upgrade the stock later? thx
One of the more informative vids on the LTR, thanks. Whose mag set up / bottom metal did you use? Did GA install it for you? Now that you have used the mag for awhile, have you had any problems with it, was the upgrade worth the investment? Thanks for your time. Cheers! Paul
Just put on lay-a-way (funny I know) the new 700 SPS Tactical AAC with the 20" 1/10 twist barrel... This is my first rifle, the salesman said it would be excellent to 500 yards... I can't see myself needing to reach much further than that... What kind of scop would you recommend? Great job on your rifle btw.
@rednoseroxy well if you looking to spend around 500 or less i would go with a variable power scope like a Bushnell Elite, Millet TRS, even Vortex makes a decent scope. For around 500 yard you wont need more than a 15-17x scope. If you wanna spend the big bucks then i would go with Nightforce, I love mine and wish i didnt spend the money on this Millet LRS-1 and just save up for the Nightforce i have on my other video. Good luck
Nice I have the same stock headed my way and will be heading out to AR15 barrels house tomorrow to have him install an fte and badger knob on my remington 700 5r. Small world huh! also if you didnt know he and a few others started a forum CAPRC.com check it out if you havent already.
Man i feel super bad now! wish you had gotten my reply on CAPRC. after you sent that PM lastnight, a guy on calguns.net bought the whole set-up. if it falls through you'll be the first to know!
Do u like the millet?
Does it return to zero?
ruger204able 2 months ago
@ruger204able not any more after using Nightforce. Spend the money and cry once!!!! Get something higher end
kahai808 2 months ago
@ruger204able not any more after using Nightforce. Spend the money and cry once!!!! Get something higher end
kahai808 2 months ago
@ruger204able not any more after using Nightforce. Spend the money and cry once!!!! Get something higher end
kahai808 2 months ago
how much was the whole wyatt magazine set up?
ruger204able 2 months ago
@ruger204able its about $240 with a 5 round mag.
kahai808 2 months ago
I dont get it. All these videos showing guys working the bolt, dropping the mag, etc.
Everyone who watches these videos already knows what the little turny-turn things are on a scope, and what a magazine is, and where the magazine is, and how to extract it, and what a trigger is, and how to action the bolt.
Just shoot the darn thing and record that!
Everyone!!!! Stop already. Just shoot and record and post.
No more open close open close open close on the dang bolt. In case we've all
Buzzywuzzys 3 months ago
like your vids, bro. Nice guns!
TheRubberDuck139 3 months ago
PIcked up a whole new barrel and action for my AICS. Thinking of grabbing FTE, What do you think?
DallasfuckingTT 5 months ago
@DallasfuckingTT hey bro, where did you pick up your barreled action?
kahai808 3 months ago
@kahai808 I found it online. It was a .308, but I rebarrled it in 6.5 creedmoor.
DallasfuckingTT 3 months ago
@DallasfuckingTT who did the work? where did you get the barrel?
kahai808 3 months ago
@kahai808 Matt Perry of Perry Custom Gun. He had a 6.5 Hart in stock so I just sent him my BA and he turned it around real quick. My action was already trued up, but he double checked everything and then coated the whole thing in Cerakoate before he sent it back. Shoots .3 MOA. GAP could rebarrel yours in whatever you like as long as they have the barrel in stock. Most people I know are shooting some sorta 6.5 or 6mm.
DallasfuckingTT 3 months ago
@DallasfuckingTT what are you shooting. creedmoor, grendel?
kahai808 3 months ago
@kahai808 6.5 Creedmoor 140 AMAX
DallasfuckingTT 3 months ago
what height are your scope rings?
akaQ9 7 months ago
@akaQ9 i dont have the rifle anymore, so i couldnt tell you. Sorry about that
kahai808 7 months ago
Would you recommend the millett scope for a first time long range rifle setup.
InsertGun 7 months ago
@InsertGun i think its a good starter scope, my buddy just shot his out to 1k. its will definitely do the job
kahai808 7 months ago
I have a sps tactical .308. Shoots alright. Barrel touches the stock though when on the bi-pod. SWFA 10x44 fix. Burris tactical low variety. Egw 20mn base... The last thing I want is this b&c a5 on my gun... Then Im done!..... Maybe....lol
laoster12 7 months ago
@laoster12 wtf? lol
xxjon94xx 5 months ago
How much for the Old stock? Shipped To Vegas, Also how much for the scope you show here, No sense letting the old stuff lay around. Thanks
healthpimp 7 months ago
@healthpimp they are both gone.
kahai808 7 months ago
how much was the gunsmithing to thread and mount the muzzle brake?
davidvelarde619 9 months ago
@davidvelarde619 around here its about $150-$200
kahai808 9 months ago
@kahai808 How do i torc it down to the specified torc settings? What are the specified torc setting anyways on a B&C?
llama833 8 months ago
@llama833 for Remington 700 its 65 inchpounds
kahai808 8 months ago
Who did you Bolt Knob on your Remington 700 LTR, how much did it run you? Sounded like you said HS Precision.
EddyArkadian 9 months ago
@EddyArkadian the Bolt Knob is a Badger. they are like 35 bucks.
kahai808 9 months ago
Who did you Bolt Know on your Remington 700 LTR, how much did it run you? Sounded like you said HS Precision.
EddyArkadian 9 months ago
I'm thinking of getting one of those scopes for my new Remington 700 SPS Tactical. What do you think? I had Randall do the barrel on my AR15 also! Lives in sketchy place, but he's a nice guy and did a great job.
thenetwerx 11 months ago
@thenetwerx i would just go with something better. spend the extra money, you wont regret it.
kahai808 9 months ago
how does your camera record backwards? like in a mirror or something
Delta8559272 11 months ago
@Delta8559272 my laptop does for some reason. In the video it looks like a left handed 700 but its a right handed 700.
kahai808 11 months ago
How heavy is it now with all the mods?
NiceHeadMr 11 months ago
@NiceHeadMr it probably weighed around 12-15 pounds. its a beast
kahai808 11 months ago
I've watched this a couple of times. I always appreciate the way you go straight for the safety check. Very professional, exactly the way it should be done. Thanks.
9009pepper 1 year ago
@9009pepper I appreciate that!
kahai808 1 year ago
Awesome setup man... Hows the recoil? After you put the brake on was it a lot louder? Keep me posted... Thanks.
joezbackwith2gatz 1 year ago
@joezbackwith2gatz recoil feels like im shooting a .223. as for it being loud, i dont really know, because i use double hearing protection. its hard to tell.
kahai808 1 year ago
@kahai808 Cool... Thanks man and double hearing protection is the way to go. Thanks for the reply.
joezbackwith2gatz 1 year ago
@joezbackwith2gatz Do you have a project? Should put a vid of it!
kahai808 1 year ago
@kahai808 I have a few videos of my Savage and my Carbine. Check them out and let me know what you think.
joezbackwith2gatz 1 year ago
@joezbackwith2gatz yeah seen your carbine. sweet rifle man, i noticed it a lefty. first time ive seen the left side ejector!
kahai808 1 year ago
@kahai808 My ARs are lefty and my Savge... Im ambi but I shoot rifle lefty but shoot pistol righty but can shoot both ways. It makes it a pain to construct a carry systems for everything. I have a video of some of my load out stuff too... I have been adding more to my "heavy Loadout system".
joezbackwith2gatz 1 year ago
Where did you get the muzzle break? I've been looking all over!
blparker10 1 year ago
@blparker10 I'll send you the link man
kahai808 1 year ago
@kahai808 sweet thanks man! I found them at Midway. I'm just trying to figure out what size now lol
blparker10 1 year ago
@blparker10 what are you shoot, caliber?
kahai808 1 year ago
@kahai808 i used the 5/8"-24
kahai808 1 year ago
@kahai808 .308 SPS tactical. It has the big bull barrel.
blparker10 1 year ago
@kahai808 .308 SPS Tactical. I have basically the exact same setup as you. Stock, knob, det mag, harris, I have Nikon optics tho.
blparker10 1 year ago
@blparker10 nice you got a vid of it. love to see it!
kahai808 1 year ago
I getting ready to buy a bolt action .308 but i dont know what kind Ive been researching and Im looking for somthing tactical very accurate up to 600 yards and price is around 600-700
miltnxc123 1 year ago
@miltnxc123 I would go with a Remington 700 sps. You can get them for around 600 bucks. I would shoot Federal Gold Medal Match 168gr Sierra Match King Boat Tail. The barrel has a 1:12 inch twist which would be good for the 168gr bullet. Dont go cheap with optics. You'll regret it if you do. Nikon, Millet, Burris... you can find pretty decent sights threw these companies
kahai808 1 year ago
thanks for the info on the pelican case, but i'm looking at a drag bag style with shoulder straps. the brand i'm looking at comes in 40, 50 & 60 inch lengths. trying to fit the rifle pretty close, especially when its a soft sided bag. if i go with the 50 inch, i'll have way too much extra space. the case i may have to order from england, so i have to get it right the first time. thx
TheMoonrakers 1 year ago
hi, did the Bell and Carlson add to the overall length of your rifle? have my eye on a nice tactical case (40"), and my ltr is now 39", but may want to upgrade the stock later? thx
TheMoonrakers 1 year ago
@TheMoonrakers it added about an inch. I got mine sitting in my Pelican 1750 case with lots of room left.
kahai808 1 year ago
One of the more informative vids on the LTR, thanks. Whose mag set up / bottom metal did you use? Did GA install it for you? Now that you have used the mag for awhile, have you had any problems with it, was the upgrade worth the investment? Thanks for your time. Cheers! Paul
TheMoonrakers 1 year ago
I looked up AR-15 Barrels website. I couldn't find their address...... Sick rifle sir.
laoster12 1 year ago
Nothing funny about layaway! Guns are expensive!!!! And so are optics! How much are u looking to spend?
kahai808 1 year ago
Just put on lay-a-way (funny I know) the new 700 SPS Tactical AAC with the 20" 1/10 twist barrel... This is my first rifle, the salesman said it would be excellent to 500 yards... I can't see myself needing to reach much further than that... What kind of scop would you recommend? Great job on your rifle btw.
rednoseroxy 1 year ago
@rednoseroxy well if you looking to spend around 500 or less i would go with a variable power scope like a Bushnell Elite, Millet TRS, even Vortex makes a decent scope. For around 500 yard you wont need more than a 15-17x scope. If you wanna spend the big bucks then i would go with Nightforce, I love mine and wish i didnt spend the money on this Millet LRS-1 and just save up for the Nightforce i have on my other video. Good luck
kahai808 1 year ago
Real sweet!!
xxSURExxSHOTxx 1 year ago
@xxSURExxSHOTxx Thanks
kahai808 1 year ago
awesome gun dude! what much did u paid for the gun before the mods?
wesker07Xx 1 year ago
@wesker07Xx
I ran me about a $1000.
kahai808 1 year ago
I found another one no worries, so what did you get to replace it?
Juice56107 1 year ago
@Juice56107 trying to get an AICS
kahai808 1 year ago
Nice I have the same stock headed my way and will be heading out to AR15 barrels house tomorrow to have him install an fte and badger knob on my remington 700 5r. Small world huh! also if you didnt know he and a few others started a forum CAPRC.com check it out if you havent already.
Juice56107 1 year ago
@Juice56107
it is a small world, i was the guy that had it for sale, i hope you got my reply. it already gone man!
kahai808 1 year ago
@Juice56107
Man i feel super bad now! wish you had gotten my reply on CAPRC. after you sent that PM lastnight, a guy on calguns.net bought the whole set-up. if it falls through you'll be the first to know!
kahai808 1 year ago
how isnt it left handed? the bolt is on the "left" side
puzzler19 1 year ago
@puzzler19 That's just how my camera recorded it. Trust me it's not left handed
kahai808 1 year ago
Yep 20" barrel and fluted.
kahai808 1 year ago
20" Barrel correct? Is yours fluted?
BIGDEZUL 1 year ago
Yeah I can do one, maybe this weekend. But if not maybe next month, I'll be gone for a month or so.
kahai808 1 year ago
Are you going to do a shooting video of that gun? Nice setup!
svkmrch75 1 year ago
@svkmrch75
Videos up of me shooting it
kahai808 1 year ago