I am ignorant of how old it may be. Can you tell your viewers if this is an old surplus engine, from a defunct aircraft? And, how much did you pay, for it?
@LOlamVaEd The aircraft version of this engine was mostly used in the Boeing A75 Series Stearman, also known as the US Army PT-17 "Kaydet". It was also used in the Fairchild PT-23. It's a WWII surplus engine. A number of agplanes (cropdusters), including some Stearmans, did fly with converted tank engines! Such aircraft could operate only in the Restricted Category. The DC-3 used either Curtiss-Wright R-1820s (DC-3, DC-3A, DC-3B) or, more commonly, Pratt & Whitney R-1830s (DC-3C, C-47, C-53).
To those who have down thumbed the comments saying it should have a prop for cooling or at least some sort of flywheel:- Unlike your car engine, radials (intended to be used in a plane) rely on the large propeller to act as a flywheel and smooth out the power pulses and give the crank some inertia. Without it, the engine won't idle reliably, and it puts extra strain on the crankshaft.
well a person could run an engine like this guy does for a short time without the prop i think the cylinder arangement allows this engine to run without the props flywheel effect
it needs a prop or test club for cooling and it will also act as a flywheel which im sure it needs to run happily.
wrxguynz 2 months ago
............ FAIR FUCKING PLAY you putting that in a car if so i bet that would bomb down any road :D
CRUC1F1CAT1ON 4 months ago
That shit looks like something out of MadMax. i fucking love it!
wuerp 10 months ago
Great , just Great! I also have a radial engine that I just got started. Please check out
my video at sainthelena1. I love round engines.
sainthelena1 10 months ago
Put this on your lawnmover, and your neighbors will be P-I-S-S-E-D.
Kitfugl 1 year ago
did this come out of a sherman ?
warmfreeze 1 year ago
Now you got er' goin' ... Time to put it to work in some kind of rig !
Gearloose100 1 year ago
@glovztoshow ...Um.. because the carb wasn't wide open. You can start a car engine without it connected to anything too (neutral?).
andTO86 1 year ago
You must put out some good block parties for your neighbors to put up with that POS
vipleather 1 year ago
Did the crank shaft showing out front have a fan to cool the engine ? or was it water cooled.
curtbarile 1 year ago
it came from a sherman tank really old tank
dragata1 1 year ago
what an engine ,....a real beast!!
kevrs2 1 year ago
Hi there, just wondering what these things weigh? Probably a bit heaveyer than my old stationary engines!
steamwally 1 year ago
I live in Florida and that would make one awesome AIRBOAT MOTOR.
Not only would it fly across the glades at near sonic speed it would
also scare away every gator within 10 miles.
4freespeech 1 year ago
Are uou goning to make that a running vehicle a la Mad Max, or is it only intended to be a static display?
Mechknight73 1 year ago
DUDE!! put that in my little isuzu pick up, helzz yeaaaaaaaaa
spikonaleash 1 year ago
Batgold, is this an old DC-3 engine?
I am ignorant of how old it may be. Can you tell your viewers if this is an old surplus engine, from a defunct aircraft? And, how much did you pay, for it?
Thanks in advance.
LOlamVaEd 1 year ago
@LOlamVaEd This engine came out of a Tank. It was never in an aircraft. it was something like 70 lbs. heavier than an equivalent aircraft radial.
Batgold 1 year ago
@LOlamVaEd The aircraft version of this engine was mostly used in the Boeing A75 Series Stearman, also known as the US Army PT-17 "Kaydet". It was also used in the Fairchild PT-23. It's a WWII surplus engine. A number of agplanes (cropdusters), including some Stearmans, did fly with converted tank engines! Such aircraft could operate only in the Restricted Category. The DC-3 used either Curtiss-Wright R-1820s (DC-3, DC-3A, DC-3B) or, more commonly, Pratt & Whitney R-1830s (DC-3C, C-47, C-53).
daytenmillion 1 year ago
Damn thats the smoothest running radial ivé ever heard.
Lasselkv28 2 years ago
Jeez, I bet the neighbours hate you!!
chevvylover 2 years ago
To those who have down thumbed the comments saying it should have a prop for cooling or at least some sort of flywheel:- Unlike your car engine, radials (intended to be used in a plane) rely on the large propeller to act as a flywheel and smooth out the power pulses and give the crank some inertia. Without it, the engine won't idle reliably, and it puts extra strain on the crankshaft.
christhesnaildriver 2 years ago
Also, those cylinders are air cooled, and rely on the prop to force air through the fins, This doesn't matter for short runs like this though.
christhesnaildriver 2 years ago
No cooling will make it shut down not so fare away ...
GpunktHartman 2 years ago
hook it up to a clutch on a go kart lol
Bamchucknorris 2 years ago 3
put a blade under it and make that into the worlds meanest lawn mower
diveplane 2 years ago 3
This engine should have a 1/2 prop on it for cooling whilst running on a stand.
silver760 2 years ago
there should be a prop atleast for cooling
Bamchucknorris 2 years ago
well a person could run an engine like this guy does for a short time without the prop i think the cylinder arangement allows this engine to run without the props flywheel effect
bernard240vdc 2 years ago 2
bet the neighbours love you.......sounds cool anyway..
fjbutch 2 years ago
No flywheel? I am confounded!
fangus503 2 years ago
didnt know radials had flywheels
robby844 2 years ago
@fangus503 it has a small flywheel on the back.
silver760 2 years ago
yep briggs is a peace of shit villiers is much better and that is to
TheLaurencekid 2 years ago
I need one of these for my lawn mower!
Squarerig 2 years ago 2
Yes, Better than some piece of "Pigs and stratton!"
steamwally 2 years ago
lol nice quiet neighborhood, cars driving by, and a guy starting a huge engine XD only in America!
coolbluelights 2 years ago 6
Shouldn't there be a prop on that thing?
pencon61 2 years ago 4
haha. Sound Just like my car. :-)
MrWombatPPC 2 years ago
Now thats an engine !!! Sure wish I could hear it close up. Thanks for showing.
Michaelxxx1936 2 years ago 2
ô Burrão, essa máqui serve pra acoordar os vizinhos, você têm ódeio deles ???
plazezwski1234 2 years ago
Looks like it still has good compression.
wanagthigh 2 years ago
If I were the neighbor i'd be there pushing the start button.
Robkat3751 3 years ago 23
Bet the neighbors love you!
simonspiers 3 years ago 19