your input voltage is 13.5 volts and output 1.304 hmmm from very little energy invested and results of more energy output is called overunity, thats not free energy its more like saving money on electric bill, building a motor that doest consist of input voltage just only outputs voltage that is my friend free energy.
Hi McLarenF1rus.Input voltage was 4.5v and it was also charging a 9v battery.This test was more to see how the magnet behaved when a load is put on it and you can use a lot more generator coils if you want.A motor which has no input is an idea many are working on and magnets will be involved you can be sure if this ever happens but i am happy with solar energy as that is a free resource which we should embrace.Thanks for your comment.Jonny
Free energy is finaly here!But the Oil coporations life depends on covering this up,Find a motor that needs no fuel or input at LT-MAGNET-MOTORdotCOM ,Let the revolution begin!
I invented a breakthrough energy source which violates the law of energy conservation. I have a PROOF that there are electrodynamic phenomena that violate the law of energy conservation. I am looking for $6M for a prototype and patents.
@lawsarejusttogovern Actually it is going to cost much more. But if I have $6M, then I can make a partial prototype that proves it over-unity operation. It may turn out that it has to be a big device, just the building to house the partial prototype may cost $2M. Do you really think I could get the money by starting a non-profit organization? How do you suggest I go about it?
@henrykay01 I guess I should start off by saying have you made a prototype, a small scale version? If yes do you have a patent on it... Do you have a Mutual Non-Disclosure Agreement made up? I just don't get how a prototype would cost that much...And finally what is your intention with this outcome, are you looking to make money or do this for other reasons?
@lawsarejusttogovern As far as I know, a small-scale version is a matter of somewhat distant future. A big version can be made much sooner, but it requires a component that is not on the market. So I have not made any prototype.
Hi Dilekz.You think this is strange then have a look at my satellite vids.
I don't make these motors with the specific goal of overunity but there are lots of ways to recover energy from these motors so when you add it all up,it may be closer than you think.Thanks for your comment.jonny.
@jonnydavro Well with some systems you will get very close to 100%. But probably without load. There is nothing wrong with experimental things. I actually love it. Trying things out makes yourself smarter and you get a better view of the situation. But i find this a very funny video in how the magnet rotates :)
Ok quick question for the newbie, what if you have a coil of copper wire ( l l )and drop a magnet down it ( - )?... dose it generate a current or does the magnet have to go back and fourth? ( l - l )
Hi.The magnet has to be moving to induce a voltage.If you drop a sphere magnet into a Bedini coil with a third winding for a pickup coil then this works really well as sphere's will spin on the spot and as long as the magnetic flux is cutting through the coil windings then it will generate.Hope this helps.Regards jonny
Hi bridobrido.This vid shows my first attempt to recover some energy and i have since refined my pickup coils though it is still running underunity although utube user "4christonly1"has one off these motors self running.Thanks for your comment.Regards jonny.
@jonnydavro Thanks for your reply, I've been practically obsessed with magnetics for the last week and a half, I've already drawn 50 pages of concepts but it takes a while to recognize what is feasible and what is not. I've only started to research online. I want to direct my attention to systems that have already been replicated and figure out how to use them in conjunction with the existing forces of nature.
Hi.bridobrido.Coils and magnets are indeed fascinating and not completly understood so there are plenty of new things to discover.Thats what make's experimenting in this field so exciting as you will find out when you start to construct some of your concepts.Working in harmony with nature sounds like the way to go as i am sure there are energy sources yet to be discovered and exsiting ones utilised.For online research,chech out energeticforum and overunitydotcom.Happy experimenting.Regards jonny
I would try some type of Teflon or oil at the bottom of the spinning magnet. Something that has a good molecular contact level and keeps things smooth. This way you get rid of the bouncing and etc.. Hrmm what if we placed the magnet in WATER ? Air is nice :) I almost have the feeling you could use glass and a oil type on the surface. To break the resistance.
Very nice :) Now you just need to float it by use of another magnetic force ;) This way you get rid of the friction and you can see somthing really take off............
As I said in your earlier video, this is PURE genius!!!!! I believe this is operating like a homopolar motor and yet, you are using pick-up coils to tap the energy AND the magnet does not slow down! Good for you. Man, this is cutting edge stuff. Great job!
Hi Bill.Thanks for your kind comment.I think there are plenty off suprises to come with this motor yet.Your thoughts on it's operation are interesting, keep em coming.Also while iv'e been waiting for some more bridge rectifiers to turn up i have managed to get the motor running at full speed on 11mA .
I really hope someone with an oscilloscope replicates this and give's us a clearer picture off what is going on.I know nothing about scopes so am no use there.Thanks again Bill regards jonnydavro
Hi Kevin.Adding more coils will be my next step.I just wanted to see if the magnet ramained stable in the presence off the pickup coils with this test and it does.Thanks for the tip on the rectifier.Regards jonnydavro
your input voltage is 13.5 volts and output 1.304 hmmm from very little energy invested and results of more energy output is called overunity, thats not free energy its more like saving money on electric bill, building a motor that doest consist of input voltage just only outputs voltage that is my friend free energy.
McLarenF1rus 1 year ago
Hi McLarenF1rus.Input voltage was 4.5v and it was also charging a 9v battery.This test was more to see how the magnet behaved when a load is put on it and you can use a lot more generator coils if you want.A motor which has no input is an idea many are working on and magnets will be involved you can be sure if this ever happens but i am happy with solar energy as that is a free resource which we should embrace.Thanks for your comment.Jonny
jonnydavro 1 year ago
This has been flagged as spam show
Free energy is finaly here!But the Oil coporations life depends on covering this up,Find a motor that needs no fuel or input at LT-MAGNET-MOTORdotCOM ,Let the revolution begin!
breeannaqktjbl 1 year ago
Now do that experiment in a vacuum to see if you can get more power
Anonymousg64 1 year ago
I invented a breakthrough energy source which violates the law of energy conservation. I have a PROOF that there are electrodynamic phenomena that violate the law of energy conservation. I am looking for $6M for a prototype and patents.
H. Tomasz Grzybowski
tel. +48-512-933-540
henrykay01 1 year ago
@henrykay01 why does it cost 6m? Why don't you start a partner project a non profit org...
lawsarejusttogovern 1 year ago
@lawsarejusttogovern Actually it is going to cost much more. But if I have $6M, then I can make a partial prototype that proves it over-unity operation. It may turn out that it has to be a big device, just the building to house the partial prototype may cost $2M. Do you really think I could get the money by starting a non-profit organization? How do you suggest I go about it?
henrykay01 1 year ago
@henrykay01 I guess I should start off by saying have you made a prototype, a small scale version? If yes do you have a patent on it... Do you have a Mutual Non-Disclosure Agreement made up? I just don't get how a prototype would cost that much...And finally what is your intention with this outcome, are you looking to make money or do this for other reasons?
lawsarejusttogovern 1 year ago
@lawsarejusttogovern As far as I know, a small-scale version is a matter of somewhat distant future. A big version can be made much sooner, but it requires a component that is not on the market. So I have not made any prototype.
henrykay01 1 year ago
@henrykay01 what component isn't on the market?
lawsarejusttogovern 1 year ago
@lawsarejusttogovern and henrykay. It may be better if you have your conversation via the personal message feature.Thanks Jonny.
jonnydavro 1 year ago
@jonnydavro nice vid jonny ;) will do!
lawsarejusttogovern 1 year ago
Hi, this is a strange way of making a motor.. but you will certainly not get more then 100% energy back.
Dilekz 2 years ago
Hi Dilekz.You think this is strange then have a look at my satellite vids.
I don't make these motors with the specific goal of overunity but there are lots of ways to recover energy from these motors so when you add it all up,it may be closer than you think.Thanks for your comment.jonny.
jonnydavro 2 years ago
@jonnydavro Well with some systems you will get very close to 100%. But probably without load. There is nothing wrong with experimental things. I actually love it. Trying things out makes yourself smarter and you get a better view of the situation. But i find this a very funny video in how the magnet rotates :)
Dilekz 2 years ago
Ok quick question for the newbie, what if you have a coil of copper wire ( l l )and drop a magnet down it ( - )?... dose it generate a current or does the magnet have to go back and fourth? ( l - l )
friskydeadman 2 years ago
Hi.The magnet has to be moving to induce a voltage.If you drop a sphere magnet into a Bedini coil with a third winding for a pickup coil then this works really well as sphere's will spin on the spot and as long as the magnetic flux is cutting through the coil windings then it will generate.Hope this helps.Regards jonny
jonnydavro 2 years ago
So are you getting more out than you're putting in? Or is it just to look cool and get a little back of what was put in?
bridobrido 2 years ago
Hi bridobrido.This vid shows my first attempt to recover some energy and i have since refined my pickup coils though it is still running underunity although utube user "4christonly1"has one off these motors self running.Thanks for your comment.Regards jonny.
jonnydavro 2 years ago
@jonnydavro Thanks for your reply, I've been practically obsessed with magnetics for the last week and a half, I've already drawn 50 pages of concepts but it takes a while to recognize what is feasible and what is not. I've only started to research online. I want to direct my attention to systems that have already been replicated and figure out how to use them in conjunction with the existing forces of nature.
bridobrido 2 years ago
Hi.bridobrido.Coils and magnets are indeed fascinating and not completly understood so there are plenty of new things to discover.Thats what make's experimenting in this field so exciting as you will find out when you start to construct some of your concepts.Working in harmony with nature sounds like the way to go as i am sure there are energy sources yet to be discovered and exsiting ones utilised.For online research,chech out energeticforum and overunitydotcom.Happy experimenting.Regards jonny
jonnydavro 2 years ago
I would try some type of Teflon or oil at the bottom of the spinning magnet. Something that has a good molecular contact level and keeps things smooth. This way you get rid of the bouncing and etc.. Hrmm what if we placed the magnet in WATER ? Air is nice :) I almost have the feeling you could use glass and a oil type on the surface. To break the resistance.
rainmanp7 2 years ago
Very nice :) Now you just need to float it by use of another magnetic force ;) This way you get rid of the friction and you can see somthing really take off............
rainmanp7 2 years ago
Jonny:
As I said in your earlier video, this is PURE genius!!!!! I believe this is operating like a homopolar motor and yet, you are using pick-up coils to tap the energy AND the magnet does not slow down! Good for you. Man, this is cutting edge stuff. Great job!
Bill
Pirate88179 2 years ago
Hi Bill.Thanks for your kind comment.I think there are plenty off suprises to come with this motor yet.Your thoughts on it's operation are interesting, keep em coming.Also while iv'e been waiting for some more bridge rectifiers to turn up i have managed to get the motor running at full speed on 11mA .
I really hope someone with an oscilloscope replicates this and give's us a clearer picture off what is going on.I know nothing about scopes so am no use there.Thanks again Bill regards jonnydavro
jonnydavro 2 years ago
that just looks kind of cool. nice motor? lol
chrisf77 2 years ago
I love the single magnet bedini's...
It would be interesting to get a scope on it and see what it's doing...
As for power generation, do a search in yahoo for voltage doubleing rectifier and see if one of those might help...
I'd love to see what more gen coils gives...
comwarrior69 2 years ago
Hi Kevin.Adding more coils will be my next step.I just wanted to see if the magnet ramained stable in the presence off the pickup coils with this test and it does.Thanks for the tip on the rectifier.Regards jonnydavro
jonnydavro 2 years ago