Gigaminx assembly part 3

[fellowesairduster]

fellowes airduster

[azurezinc]

would u mind telling me wad program u used to do the effects n stuff? i mean the starting, like how u put the c4y logo n stuff

[PestVic]

just roxio easy media creator 9. now i use pinnacle studio HD UC

[azurezinc]

ok thx :)

[PrestonProductions1]

its called application tape

[metroidmen]

My center caps keep popping out. How do you keep them in?

[Greeneyeskater93]

sweet =D

[rubik294]

best gigaminx assembly on youtube

[nace112]

how do you keep the caps from falling off without gluing them in?

[UKSpeedCuber]

Glue them in.

Don;t use tack, it goes in the screws and gets really annoying.

[nace112]

what about when i have to adjust the tension? i know i could set it before i glue them. but what if i have to change the core or something?

[PestVic]

use elmers glue. its like the white glue. it will hold it strong enough and it will be easy to get to the core again

[RedRoost80]

well, you can handle it with care, you can glue it, but i recommend only small drops of krazy glue on the corners of the caps, key word is CORNER AND SMALL AMOUNTS!! (i glued my megaminx cap to a screw, which luckily i had another cube4you screw n spring. make sure there are no pieces touching it, and if anything, stick a small piece of paper (showin in james [cube4you's] 3x3 assembly tutorial on the forum) into the centre and then itll be harder to take off.

[nace112]

ok thank you that really helps a lot. that was the only issue that really bothered me on the gigaminx.(besides the turning)

[RedRoost80]

yeah. after i assemble it, i usually leave the centres off, with any puzzle, so i can adjust it, if its too loose i tighten and i keep doin it till its perfect then i disassemble, glue the caps down, test the rotation of the centres, then re assemble and sticker and mess up and solve =p

[arniex1]

that things insane!!

[3DaysTillGrace]

You know when there is a six minute sticker video that this puzzle is going to be pretty beastly. Now how do you solve it?

Like a 5x5?

[UKSpeedCuber]

You solve the centers, then edge pair.

[vifs]

I can't wait till i get a job after i move, so going to buy a gigaminx

[TheMachanga]

Thats a lot a pieces

[esquimalt1]

nvm it works now

[esquimalt1]

crap it's not letting me watch lol

[Truepatfan]

"An error occurred, please try again later." -.-

[DragonCuber]

Good work, I cna't wait to get mine :D

[PestVic]

SWEET DONE haha