Kewl I have the same amp but I always keep it on overdrive with bass 10 mid 2 treble 7-10 depnds how much distortion I want and gain inbetween 5-6 while the volume is around 2-3
I don't know if it's the amp or guitar but when I try to play a song using the high 3 strings E B and G it sounds all scratchy n bad like for solos it's good but for strums it's like a cat gettin ra*ed
press the white button it will give u the distortion i have the same amp. i get my metal sound with treble 10 mid 3-4 bas 2-3 and volume 2 or what ever floats ur boat:P
USE GAAAAAAAIIIINNN, push the white button, and set the gain to about 6 or 7 fiddle with the tone on you're guitar and the amp a bit to get the sound you want by ear... but most importantly, USEEEE GAAAIIIINNN lol
Hey, do you think if will sound fine if i add a boss ds-1 distortion pedal and leave the amp in a clean channel using the distortion on the pedal only?
you just need 2 cords... hook the 1st one into the input spot in the amp and the output spot of the pedal. hook the 2nd into the input slot of the pedal and the guitar... works perfect, PLUS this is how its always been done... no fancy line 6 hookups and stuff
no... in the clean channel it gets insanely loud (atleast on the SD1 and the DS1 should make it louder because ot drives it harder)... play it on the drive channel without gain and itll be great but in the clean channel youll probably damage the amp
@asheyu. If you want a heavy metal type of sound just turn bass treble and mid to 10 and press the ch select button and turn the gain to 10 and the volume on the left and that should leave you with a heavy metal tone.
sorry ment the volume in the right, dont turn to high! only if your on stage i suggest a begginger volume to be like 2 and a half thats pretty loud in a room.
turn on the channel select thingy and turn both the gain and volume down to 1 and slowly turn it back up until u get to the volume u want. the distortion on this isnt that greet though
Delay, Reverb, Reverb+Delay, Chorus, Chorus+Delay, Chorus+Reverb, Flange and Tremolo xD an video with my new Epiphone Les Paul Special 2 is coming soon ;)
what was the last song you played?
Siqqen 5 months ago
@Siqqen Bang Bang by Nancy Sinatra
Gho5ty 5 months ago
if that is a behringer vtone gm 108 underneath the bullet 150 i have both of those amps
MrSchroyer 8 months ago
I just got one yesterday, I love this amp!
CapnTac 1 year ago
30 watts=
sjeito 1 year ago
where were the knobs when u played nothing else matters?
plz respond
thx!
csguitarsk8dude 1 year ago
@csguitarsk8dude Effect Knob on Chorus + Reverb ;)
Gho5ty 1 year ago
@Gho5ty thank you sub/sub?
csguitarsk8dude 1 year ago
Kewl I have the same amp but I always keep it on overdrive with bass 10 mid 2 treble 7-10 depnds how much distortion I want and gain inbetween 5-6 while the volume is around 2-3
I don't know if it's the amp or guitar but when I try to play a song using the high 3 strings E B and G it sounds all scratchy n bad like for solos it's good but for strums it's like a cat gettin ra*ed
killAFreakZeak 1 year ago
@killAFreakZeak haha like u'r last sentense
Gho5ty 1 year ago
can you make it sound like Avenged Sevenfolds guitars?? THNX
LooneyboyzCR 2 years ago
how you put a metal sound??? i dont get the explication you gave to kevinjonas
xXtomangelXx 2 years ago
And nothing else matterssssssss....
WeWillNotRockYou1 2 years ago
how do u get the metal sound on this amp because i have it but i cant figure it out
KevinJonas4Lyfe15 2 years ago
Switch the Channel to Distortion and Turn on some Gain ;)
Gho5ty 2 years ago
haha thankss!!
KevinJonas4Lyfe15 2 years ago
@Gho5ty Can you use a pedal with this amp, coz I've hear that you couldnt and I have one and wouldnt know where to plug a pedal in.
Gishki 2 years ago
Read some posts earlier^^ no there is no input for any Footswitch BUT! you can plug a effect pedal between your guitar and the amp ;) try that
Gho5ty 2 years ago
@Gho5ty thanks alot man really helped ;-D
Gishki 2 years ago
press the white button it will give u the distortion i have the same amp. i get my metal sound with treble 10 mid 3-4 bas 2-3 and volume 2 or what ever floats ur boat:P
5124alex 2 years ago
and turn up the bass, cut the mid, and make the treble really low... gives you a REALLY heavy sound
sergeant137 2 years ago
USE GAAAAAAAIIIINNN, push the white button, and set the gain to about 6 or 7 fiddle with the tone on you're guitar and the amp a bit to get the sound you want by ear... but most importantly, USEEEE GAAAIIIINNN lol
000NoctemAeternus000 2 years ago
oki thnx :)
Dasher848 2 years ago
Hey, do you think if will sound fine if i add a boss ds-1 distortion pedal and leave the amp in a clean channel using the distortion on the pedal only?
Dasher848 2 years ago
This amp hasn't any inputs for footpedals, so u have to buy a pedal like the boss ds-1 if u want to switch clean to distortion by foot ;)
Gho5ty 2 years ago
you just need 2 cords... hook the 1st one into the input spot in the amp and the output spot of the pedal. hook the 2nd into the input slot of the pedal and the guitar... works perfect, PLUS this is how its always been done... no fancy line 6 hookups and stuff
sergeant137 2 years ago
no... in the clean channel it gets insanely loud (atleast on the SD1 and the DS1 should make it louder because ot drives it harder)... play it on the drive channel without gain and itll be great but in the clean channel youll probably damage the amp
sergeant137 2 years ago
any tips on how to get that AC/DC Sound
OakCliffDavid214 2 years ago
Turn on CH Sellect, Make the gain to max, lower the volume to the right of the ch select butt, and mix some with the tone and bass and some
SwanteRSk8 2 years ago
How di I get the metallica sound on this amp?
brava0123 2 years ago
u dont
JAespies 2 years ago
2 words, crank drive
sergeant137 2 years ago
How do I get a clean blues sound on this amp?
WesFR 2 years ago
i have a bullet amp from 1992 with 38 watt and it´s still working fine
Feileiks 2 years ago
how much watt this amp??
cheneng123 2 years ago
thanks ppl am a beginner n this helped me
hirokum 3 years ago
benutzt du in diesem video die epiphone les paul speciall II?
Bezirk38531 3 years ago
jopp
Gho5ty 3 years ago
Hey man can you message me how to get good distortion on this thing.
DougDoesIt 3 years ago
i got that 1 to :D
thepker122 3 years ago
heey, i've just started playing guitar
and i have that same amp,
and have no idea how to use it..
what settings should i set the amp if i want a punkish sound? :)
asheyu 3 years ago
@asheyu. If you want a heavy metal type of sound just turn bass treble and mid to 10 and press the ch select button and turn the gain to 10 and the volume on the left and that should leave you with a heavy metal tone.
thepker122 3 years ago
sorry ment the volume in the right, dont turn to high! only if your on stage i suggest a begginger volume to be like 2 and a half thats pretty loud in a room.
thepker122 3 years ago
Thanks for the demo,but as all the Fender Bullet range ,it s sound totally crap!Harsh and too crispy....Try a Vox DA!
221961LIO 3 years ago
i know it doest sound awsome but its alright
suveneer 3 years ago
how do you get distortion on this amp???? plz help i cant get it to have distortion plz help
lightbomber5 3 years ago
turn on the channel select thingy and turn both the gain and volume down to 1 and slowly turn it back up until u get to the volume u want. the distortion on this isnt that greet though
xXemoidolXx 3 years ago
you press the little white button... and make sure tha gain volume is on and the volume to the right of the little white button
VooDooPooh 3 years ago
how do u turn off the effects
jorgensen4life 3 years ago
Just turn the Effect potie down ;)
Gho5ty 3 years ago
so i have the amp, but i need help,
can you turn the effectøs oföäöäöäöä+
jorgensen4life 3 years ago
DO WANT
14icedtambourines 3 years ago
Great video. Thanks a ton for the informative and instructional demonstration!(an excellent
time offering from a truely "good headed' dude).
erth2myk2b 3 years ago
I have this amp and i think it sucks! The sound is to scratchy with distortion. I want to get a better Bullet amp.
SpecialMonkeySquad 3 years ago
I've bought a Fender Frontman FM210R
this amp rocks! ;)
Gho5ty 3 years ago
to fix the scratch on the amp you need to put the rythm tone knob on zero.
weaver350 3 years ago
Thanks, you helped me make up my mind that this amp would be adequate for my son's guitar playing needs. I'll be getting it for him.
tudidru 3 years ago
how did u get distortion at 1:50
blackout560 3 years ago
Cool clip, man, thanks!
mtfr 3 years ago
i have that amp
wooooooo!!!!!!!!!
28simpson28 4 years ago
I'll buy the same amp ^^
EMKOLPRULLZ 4 years ago
how to do you get the effects like it is in 1.50 mins ish?
laralauraxxx 4 years ago
i got same amp =]
dixiefun 4 years ago
Geiler amp
VisionRoyaL 4 years ago
thx
Gho5ty 4 years ago
Und was war das am ende?
ParanoidHelo 4 years ago
nice amp, nice effects... delay... reverb... drive... what more?
what about your new guitar? show us a video with it.
feliperocks23 4 years ago
Delay, Reverb, Reverb+Delay, Chorus, Chorus+Delay, Chorus+Reverb, Flange and Tremolo xD an video with my new Epiphone Les Paul Special 2 is coming soon ;)
Gho5ty 4 years ago
Cool good job!
Naruto1151 4 years ago