New invented HAWT - JET wind turbine vs conventional turbine

[MilanKarakas]

It is not a problem get more efficiency out of the wind - it is problem to make it enough strong in order to prevent damage in the case of strong wind.

Try this on the real wind, and look when wind gust suddenly break your propellers.

[1crazyfocker]

i repeat too, its a simple number, that anyone that has applied for a patent gets. but i guess that is just to much when called out to come up with . and it will be up to those that watch you videos to deside, but it is clear now that they know!

[1crazyfocker]

cont

after watching your videos and going to your website, and then doing my own test, its safe to say that your idea does help, efficancy of a plus 2% to 5%, and that you are a scam artist. missleading others making far out claims, and out right lieing. you should be ashamed of your self! just tell the truth, it helps but no where near what you are claiming, so why make such outright lies, your website answered that. you give inventor a bad name and you are just greedy.

[TheTonchev]

@1crazyfocker

The showed is a fact. Please upload your tests. If not I will consider you as a bad man.

See some of my patents as official publications at: v3(dot)espacenet(dot)com/ tag: tonchev as inventor

[1crazyfocker]

@TheTonchev think what you like, now that i have put it out there, everyone will notice how it spins at the same speed at first, until your hands goes off camera as if to shut off a risistor of some sort. plus the fact i am still waiting for the patent pending number, its a simple thing, 947384657 see how easy it is to type numbers. a broken link does no good, a simple number that any one can check is proof. i think you truely are a hack and so will all that reads this

[1crazyfocker]

the more i watch your videos the more i think you are a hack. its funny how it started making the same power as the other blade, then you pan the camera up, and then as if you shut off something it suddenly speed up, if something was hooked up to the motor ie light bulb or a resistor then more torque would be needed to spin the motor(which is acting like a generator) then you shut off or remove the resistor then less torque is need and thos spins faster. cont

[TheTonchev]

@1crazyfocker

The shown is a fact.

No matter your ' empty' words

I and others are accepting only facts here. .

You can find my patents in all free patents data base/

Please send your patents as a numbers as example.

[derman077]

Nicely done thanks.

[sbflash311]

Someone needs to invent a device that harnesses breaking wind.

[derman077]

@sbflash311 They have that for cows. I'm not even kidding.

[tbyte]

Хубаво е да напишеш/кажеш площа на лопатите на 2-те перки и на това и на другите видоета за да си спестиш глупавите коментари, че само това е разликата. Не съм спец. но това което правиш не го ли ползват в момента на крилата новите самолети - върховете кой 'чупят' вихрите ?

[TheTonchev]

@tbyte

Разликата е в пъти и е очевидна. Функцията на извитите краища е същата като на самолетите, но понеже лопатите се въртят имат и допълнителна функция.

Иначе хората са различни и правят различни коментари. Някои могат да изглеждат глупави, но за мен всички са полезни.

[TheTonchev]

Yes. You are right. But it depend on the tip shape/design. In the case of very fast rotation the prop is self damaged. In this case blade tip arrangiments act as air brakes and prevented very fast rotation. Take in mind that low wind speeds is prevaling wind usually at most locations. That is why the capacity factor of new invented prop is much better.

[sjh7132]

I don't believe that prop is rotating anywhere near it's peak power point. You've added a little more area and a wall to keep the air from spilling off the sides. I think this would have less of an effect if the prop were spinning faster.

[TheTonchev]

The flywheel effect does not increase turbine power otput at all.The flywheel effect assists to smooth rotation, only.

[Yourbadnightmare]

It is possible that the added weight of the second one contributes to a better flywheel effect and not specifically the shape. Try adding or subtracting weight in your experiment and see if that does anything to the power output. Good luck, keep up the good work.