for the money yo spend this is crap. you could spent the same on a cooler master case getting better quality and if you spend slightly more you can get better quality.
NOTICE!! I have purchased it and i can confirm the video reviewer removes the dust filter wrongly, so do not be put off by the way he removes the filter. His filter was placed wrongly on the underside of the case with pulling hook facing outwards towards the RIGHT >>> (towards the drive bays) causing the reviewer having to bend the filter risking damage. Mine was CORRECTLY fitted on the underside of the case with pulling hook FACING UPWARDS ^^^ thus no bending and easy removal.
@Dean129012 Obviously you do not have this case because if you would do a little more research, there is a piece of metal in the way of allowing this top be possible, its the piece right infront of the top 180mm fan that the side panel hooks on to. It would of been nicer to see it be able to be removed from the side, but just learning you can remove it without having to remove the actual fan like the bottom is still a good feature.
@GodDragon1 i have used the case, i built one for a client 2 weeks ago, maybe you got a dodgy batch because the fan filter does come out easily from the side like it was intended.
who cares about removable motherboard tray, I understand that it is very useful for most people but the problem is that it ads to the cost of the case and for majority of people that cost difference is very significant. Removable motherboard tray would be more important for enthusiasts who swap out hardware but clearly this is not an enthusiast level case.
@UnrealGlider No, It is. What I am saying is that it makes no sense to apply the same standards to budget cases. A 40$ case will not have an aluminum frame or a removable motherboard tray.
@UnrealGlider I guess i just posted that message because it was the exact same price as the FT02 when i posted which happens to be a much better case than this FT01. But even now at it's new 200 dollar price tag, it's still overpriced and i can get a much better case for the price point.
the filter for the top fan is on the side now.. not the inside anymore. it works now just like the front one.
But beware.. If you have a mobo like an asus p6x58d with sata ports facing sideways rather than upwards.. it is a pain to route the cables thru the provided cable management holes.
keep that in mind.
all in all tho.. very nice case for the money and presently there is a 30 dollar rebate thru newegg making it only 170
Oh. After seeing Obsidian 800D and the Silverstone RV01, they are better looking than the ATCS 840. LOL. But still have a long time before I can change my casing. Got my build less than a month. Thanks anyway. :D
Well right now I'm looking around the internet for a computer case for my first custom build, and I'm really interested in this case especially. The only thing I need help with is, why is it bad that there is not an access hole in the motherboard tray? I'm sorry for asking, I'm sure pretty much everyone knows why, but this is my first build and I'm still learning a lot. I would really appreciate the help. Thank you
That acesshole allows you to add retension plates for large CPU coolers. If your into overclocking you will find this troublesome...if your into gaming you might get away with a medium sized cooler.
well if you have a large CPU fan you have something called a retention plate. it goes on the back side of the mobo and helps screw in the fan. the down side of not having it be accessible is that you cannot remove you fan without removing your motherboard. hope this helps
go for black. the drive bay covers on the silver case do not match with the rest of the case. The only problem with a black case is that dust becomes more apparent on the exterior of the case. BTW I have an old TJ02 (silver) case and I love it. It is a hybrid aluminum case, but it is more rigid that a full aluminum case.
It blows air in, so all the air goes out the PCI-e, ports, and Rear fan keeping the graphics card and CPU cooler... and as I said, its put like that to keep dust from getting in.
howcome I have a dell computer and when i have it laying down the CD drive opens like normall but when I use it as a tower it wont open and i have to use a pin and place it through that little hole next to the CD/DVD drive
wow that is a monstrous card (hd4870x2). i think the lian-li amorsuit 08 should be good, the cosmos s is also a good choice(this case has a very good width). here in my place they are selling the cosmos black label (fantastic case)
I would like to know that also. The TRUE1366 RT is about 160mm tall. The case width is 210mm. But, we don't know how deep the motherboard standoffs are.
I have to say this is an excellent review. I especially liked the graphics card length measuring, as well as the round up at the end. It certainly looks good and there aren't that many cases which have a plain window - which is cool.
I do agree too guys.Although my new case does have removable m-board tray my old one was a thermaltake and quite expensive and it didn't feature a goddamn tray.:P
I can't understand that why do they but removable motherboard trays to big full tower cases where's already alot free space and not to the mid-towers that are so cramped inside
any normal, descent pc case must have removable m-board tray. i have onevery cheap,noname pccase with freetray, but suprisingly - many expencive cases do not have it. like it is a huge effort to produce them with removable tray :-/
I bought myself a thermaltake bach vx mid-tower case and when i installed my motherboard with a huge cpu cooler i almost broke the cpu cooler when trying to get to the screws of the mohterboard :)
really nice case for estethic, btw I read about a problem in graphic cards cooling if you keep up the upper hdd retention box.
So I think that a overclocker should remove it anyway, even if he doesn't need more room.
Unhappy to see how bad are positioned dust filters and the lack of removable mb tray... i'd like to see what Rodny thinks about the Lian Li PC-A17, which actually I think is little better than this one (and also cheaper).
Lian Li one has also removable mb tray as far as I know.
I would like to have this case to have a side fan, an easier way to remove the filter, and to have labels for the power, and reset button. since the reset looks like a power...
Nice video there Rod. I like your videos, but everytime I notice you mentioning "Removable Mobo tray". Is that really such a big issue? How many times in the lifetime of the PC would someone work on Mobo replacements? Not much, right? I don't see that as an issue.
The top Air filter seems flexible and should not be much of a hassle to be removed.
What I would like manufacturers to do is to have a cover over the case USB / Firewire / Audio ports.
How can it be kickass when the top filter fouls when removed? Any advice on how to get Vista to accept sata drivers without a floppy drive? Thanks Rodney!
for the money yo spend this is crap. you could spent the same on a cooler master case getting better quality and if you spend slightly more you can get better quality.
MrRoosterfoot 1 month ago
NOTICE!! I have purchased it and i can confirm the video reviewer removes the dust filter wrongly, so do not be put off by the way he removes the filter. His filter was placed wrongly on the underside of the case with pulling hook facing outwards towards the RIGHT >>> (towards the drive bays) causing the reviewer having to bend the filter risking damage. Mine was CORRECTLY fitted on the underside of the case with pulling hook FACING UPWARDS ^^^ thus no bending and easy removal.
gtern298 2 months ago
Hi guys, frame instake (front and top) is alluminium too? Or Steel? Foam heats the machine?
Sorry for my poor english :(
neo12neo 9 months ago
Unfortunately, the motherboard tray is not removable.
cssmrlava 10 months ago
omg you pulled out the top dust filler wrong, it you just pull it from the side.
maybe you'res was just put in wrongly.
Dean129012 1 year ago
@Dean129012 Obviously you do not have this case because if you would do a little more research, there is a piece of metal in the way of allowing this top be possible, its the piece right infront of the top 180mm fan that the side panel hooks on to. It would of been nicer to see it be able to be removed from the side, but just learning you can remove it without having to remove the actual fan like the bottom is still a good feature.
GodDragon1 1 year ago
@GodDragon1 i have used the case, i built one for a client 2 weeks ago, maybe you got a dodgy batch because the fan filter does come out easily from the side like it was intended.
Dean129012 1 year ago
Comment removed
Tomazelio 1 year ago
Comment removed
Tomazelio 1 year ago
who cares about removable motherboard tray, I understand that it is very useful for most people but the problem is that it ads to the cost of the case and for majority of people that cost difference is very significant. Removable motherboard tray would be more important for enthusiasts who swap out hardware but clearly this is not an enthusiast level case.
alex14469 1 year ago
@alex14469 This is not an enthusiast level case? Ok...^^
UnrealGlider 1 year ago
@UnrealGlider No, It is. What I am saying is that it makes no sense to apply the same standards to budget cases. A 40$ case will not have an aluminum frame or a removable motherboard tray.
alex14469 1 year ago
@alex14469 "but clearly this is not an enthusiast level case."
Direct quote from you..
UnrealGlider 1 year ago
What a donk, overpriced case.
Scott97169 1 year ago
@Scott97169 Overpriced? Full a unibody full aluminium case? for £130? AND a window? ARE YOU DUMB?
UnrealGlider 1 year ago
@UnrealGlider I guess i just posted that message because it was the exact same price as the FT02 when i posted which happens to be a much better case than this FT01. But even now at it's new 200 dollar price tag, it's still overpriced and i can get a much better case for the price point.
Scott97169 1 year ago
the filter for the top fan is on the side now.. not the inside anymore. it works now just like the front one.
But beware.. If you have a mobo like an asus p6x58d with sata ports facing sideways rather than upwards.. it is a pain to route the cables thru the provided cable management holes.
keep that in mind.
all in all tho.. very nice case for the money and presently there is a 30 dollar rebate thru newegg making it only 170
TripleXBeatz 1 year ago
I HAVE THIS xD
devilfish97 1 year ago
I think that he is wrong pointing the front ports at 2:17, take a look, I'm not sure
MrDucktaper 2 years ago
6:26 This is a kickass product !
straxjam 2 years ago
Nice case.
SonsOfHateSphere 2 years ago
It looks like it came out of a cardboard box , literally
cjgan80 2 years ago
wtf isnt a kickass product for this guy........i watched 14 or so reviews and he said all 14 were kickass
tf2godlikespy 2 years ago
there are some great products..
kidowner 2 years ago
@tf2godlikespy
the antec 1200 is kick ass
its 100% kick ass
RoCRoikar 1 year ago
@RoCRoikar Antec 1200 is alright ^^ Binning mine though and going for this FT01 thing
UnrealGlider 1 year ago
lol, ditto. pretty much all the cases this guy reviews are all kick ass, that's why. :V
Shadowfury 1 year ago
@Shadowfury I kept watching vids and found one that he said was only " great" and sadly that was my case
tf2godlikespy 1 year ago
@tf2godlikespy just because he says its great doesnt mean its not a kickass chassis
audax5435 1 year ago
Is there any case that is something like this? But it is a full tower case and have an access hole.
xMExHKSx 2 years ago
closest one is a coolermaster atcs 840. dont know what you mean by acces hole though.
AnDaTeSa 2 years ago
o yea. has all the holes you want.
AnDaTeSa 2 years ago
LOL. Thanks.
xMExHKSx 2 years ago
ATCS 840 really is a badass. If it is black interior, then it rocks.
xMExHKSx 2 years ago
well there is no window on the case but if you plan on making a window. you can buy matt black paint and DIY.
AnDaTeSa 2 years ago
Oh. After seeing Obsidian 800D and the Silverstone RV01, they are better looking than the ATCS 840. LOL. But still have a long time before I can change my casing. Got my build less than a month. Thanks anyway. :D
xMExHKSx 2 years ago
Well right now I'm looking around the internet for a computer case for my first custom build, and I'm really interested in this case especially. The only thing I need help with is, why is it bad that there is not an access hole in the motherboard tray? I'm sorry for asking, I'm sure pretty much everyone knows why, but this is my first build and I'm still learning a lot. I would really appreciate the help. Thank you
RhigoThePally 2 years ago
That acesshole allows you to add retension plates for large CPU coolers. If your into overclocking you will find this troublesome...if your into gaming you might get away with a medium sized cooler.
connell256 2 years ago
Alright thanks a lot, it took forever for an answer lol. Thanks
RhigoThePally 2 years ago
get raven 02
im doing my first build but getting a pro to build it for me.
he has the FT02 and the RV01. and he likes the RV02 ten times more than both of those.
EFBoler 2 years ago
too bad for RV02.. difficult removing the harddrive cage or harddisk if you have a large video card especially dual SLI setup...
aparach 2 years ago
i love rv02 but it's too small :(
momo1tm 2 years ago
well if you have a large CPU fan you have something called a retention plate. it goes on the back side of the mobo and helps screw in the fan. the down side of not having it be accessible is that you cannot remove you fan without removing your motherboard. hope this helps
hiphopapotomas 2 years ago
Ohh ok. Yeah this is definately the biggest piece of info I've gotten lol. Thank you very much.
RhigoThePally 2 years ago
The dust filters are a huge failure.
ethr95awd 2 years ago
It's quite ugly...for a Silverstone
TheLittleWorldofGaz 2 years ago
IMO Silverstone >>>>> Lian Li.
edge160 2 years ago 5
good thing we all have are opinions then
iheartcomps 2 years ago
Posted on my birthday. LOL
AMVDawg 2 years ago
Yeah its pricey but i think im gonna save up and get one, they are sweet
itsame32 2 years ago
Damn, can't find any cheaper than $259AU. Love the TJ07 but didn't want a full tower. So this was perfect.
tgluak 2 years ago
yea mate. just bought one from PCCG. they are so nice
Chemical1203 2 years ago
silver or black? ...
:D
gamermax007 2 years ago
go for black. the drive bay covers on the silver case do not match with the rest of the case. The only problem with a black case is that dust becomes more apparent on the exterior of the case. BTW I have an old TJ02 (silver) case and I love it. It is a hybrid aluminum case, but it is more rigid that a full aluminum case.
edge160 2 years ago
Best case EVAR! :P
bob333336 2 years ago
Comment removed
gabeherb345 2 years ago
Your not suppose to.... Its defeats the perpose of the positive air pressure, to keep dust out, and its a single top fan not 2...
bob333336 2 years ago
It blows air in, so all the air goes out the PCI-e, ports, and Rear fan keeping the graphics card and CPU cooler... and as I said, its put like that to keep dust from getting in.
bob333336 2 years ago
howcome I have a dell computer and when i have it laying down the CD drive opens like normall but when I use it as a tower it wont open and i have to use a pin and place it through that little hole next to the CD/DVD drive
Jose04811 2 years ago
well its dell, they do stupid shit
bob333336 2 years ago
lol cause its true
Jose04811 2 years ago
Looks like a CM 690 ...
dude0ok 2 years ago
wanna have it tooooooo :(((
SpiELpLatZroCkeR 2 years ago
I have this case, Its so bad ass I <3333 it sooooo much!
bob333336 2 years ago 2
This comment has received too many negative votes show
die please
laidt0rest 2 years ago
I love you to.
bob333336 2 years ago 4
Do u love me 2?
xD
Just kidding...mate...seriously...-_-'
Don't say yes
AndyIsBack94 2 years ago
This has been flagged as spam show
Yes, I want to be with you forever, and ever, and ever
bob333336 2 years ago
-_-
AndyIsBack94 2 years ago
Too expensive.....
chinghinkee 2 years ago 3
@chinghinkee Well if you buy an expensive case u can use it for several builds because there is a reason to the cost.
WeztNinja 1 year ago
a clear case of great concept but not very well though through... that filter made the deal breaker for me, else I'd get this
realgundam 2 years ago 3
U can take the filters out...
bob333336 2 years ago
i reallly want this case, but its so fucking expensive!
laidt0rest 2 years ago 3
I have it, its the best case I have ever had, I <3333 so much!
bob333336 2 years ago
great case i must say
EpicNerdz 2 years ago
will it work with the x58 motherboards?
mcorpus01 3 years ago
ATX motherboards will fit.
RON3N 3 years ago
i have problem.just got 2 gainward rampage 700gs glh triple slot graphics cards.cant find the right case.does anyone know anything about it?
neploxojxxx 3 years ago
wow that is a monstrous card (hd4870x2). i think the lian-li amorsuit 08 should be good, the cosmos s is also a good choice(this case has a very good width). here in my place they are selling the cosmos black label (fantastic case)
VIVICK 3 years ago
Will a Corsair 1000hx PSU fit in this case?
Desty37 3 years ago
Yes, it should fit since that power supply is about 8 inches long.
apocgamer 3 years ago
pho shizo
mcorpus01 3 years ago
This is definitely my next case.
apocgamer 3 years ago 3
HD QUALITY FTW!!!!!
gabriel4eva 3 years ago 11
Wow. Im watching this in HD O.o
Claizen 3 years ago
will this cooler fit ? Ultra-120 eXtreme-1366 RT
digitaltactics 3 years ago
I would like to know that also. The TRUE1366 RT is about 160mm tall. The case width is 210mm. But, we don't know how deep the motherboard standoffs are.
bigbluedragonfly 3 years ago
Standoffs + motherboard are a lot less than 5cm!
audigex 2 years ago
type "&fmt=22" at the end of the url for ultra HD
stupidguyaabbcc 3 years ago
This is my current favorite case, and when I build i7 and tri-SLI in a month or two, it's gonna go in one of these.
The only thing I don't like is the power button on the front.
They should have put it on the plastic thing with the reset instead of cutting into the aluminum.
It's expensive but not crazy expensive.
It's about $225 if I remember right.
emilyek1 3 years ago
tri sli in a mid tower... good luck.
weglarz 3 years ago
Hello! I am Japanese. Please let me my poor English. I have a question for native americans. What is the meaning of "pwn noobs".
Mr.Google, my English teacher would not answer my question. Please reply.
Best Regards
clambon1983 3 years ago
This comment has received too many negative votes show
That means something simular to this:
i will beat you shitless you no good.
something like that lol.
superownzU 3 years ago
"pwn noobs" is a modern internet slang phrase that means:
pwn = Beat, win, victorious
noobs = a beginner or novice
Prior to the internet and online games, the words pwn noobs never existed and is not found in an English Dictionary.
SilentKnights 3 years ago
Pwn comes began as a mispelling of the word Own. Now it's usually pronounced Pwn aswell.
Noob comes from the word Newbie which means beginner.
So to Pwn Noobs means To Own Beginners
MufF1N01 1 year ago
This has been flagged as spam show
Why do you review crummy hardware?
underwearskids 3 years ago
This comment has received too many negative votes show
Antec is the sex!!!
underwearskids 3 years ago
Antec 1200 pwns all.
But I would go for an Antec 900 over this one.
Dotszor 3 years ago
Jeah, im running with an Antec 1200 and no single peace of dust in my case! :)
MugenRac1ng 3 years ago
You don't get peace from the dust, are they scaring you? Maybe threatening somehow? You should tell to police.
drunken88 3 years ago 7
Your mom is dust?
MugenRac1ng 3 years ago
Antec P(wn)190
Wolfie123123 3 years ago
Could someone please tell me if this case can pwn noobs better than my antec 900? Please reply
zaz969 3 years ago
It's not worth the upgrade from an Antec 900.
epZii 3 years ago
looks like a pretty good case, probably expensive though.
Lvaneede 3 years ago
~250 on ncix
esaberia 3 years ago
its about 160-180 on newegg, not bad
XxGlamisDunerxX 3 years ago
really? I was expecting 200 and up
Lvaneede 3 years ago
nah, newegg has really good prices
XxGlamisDunerxX 3 years ago
Looks like a pretty nice case if you ask me =]
With a few could be an excellent case!
AlexOnFire424 3 years ago
... With a few *Mods*...
AlexOnFire424 3 years ago
*Hopes for a review on a Monster Mods or Thermaltake Mozart case*
adrienspawn 3 years ago
this case is awesome..
elcko123 3 years ago
I have to say this is an excellent review. I especially liked the graphics card length measuring, as well as the round up at the end. It certainly looks good and there aren't that many cases which have a plain window - which is cool.
ChadMaestro 3 years ago
this case has a bit of 900 and staker in it
xboxlive6 3 years ago
I do agree too guys.Although my new case does have removable m-board tray my old one was a thermaltake and quite expensive and it didn't feature a goddamn tray.:P
hardrock6327 3 years ago
I can't understand that why do they but removable motherboard trays to big full tower cases where's already alot free space and not to the mid-towers that are so cramped inside
ˇˇ
EstonianComputerGeek 3 years ago
I agree with you 100 %.
any normal, descent pc case must have removable m-board tray. i have onevery cheap,noname pccase with freetray, but suprisingly - many expencive cases do not have it. like it is a huge effort to produce them with removable tray :-/
crabs73 3 years ago
I bought myself a thermaltake bach vx mid-tower case and when i installed my motherboard with a huge cpu cooler i almost broke the cpu cooler when trying to get to the screws of the mohterboard :)
You can see the big cooler from my channel...
EstonianComputerGeek 3 years ago
It's not very beautiful case...
EstonianComputerGeek 3 years ago
cause its simple.
I like it simple. I don't need useless LED lights. cause of that, im sick of my 900...
xtr1gunf00lx 3 years ago
its an awesome looking case.. i cant stand flashly lights and stuff.. nice and elegant like a benz :D
elcko123 3 years ago 3
01:56 very bad design.
evant3k 3 years ago
I love listening to the stock cooling
DeadHand1992 3 years ago
What motherboard was that when it showed that crossfire setup, its like red and black, its looks 100% kickass :P
EVGAguy2 3 years ago
ASUS P5K3-Deluxe
3DGAMEMAN 3 years ago
05:23 :C
Warkid1993 3 years ago
01:54 ? :D
shigalbigal 3 years ago
00:53
RenegadeFury 3 years ago
00:41
G4m3h4x 3 years ago
really nice case for estethic, btw I read about a problem in graphic cards cooling if you keep up the upper hdd retention box.
So I think that a overclocker should remove it anyway, even if he doesn't need more room.
Unhappy to see how bad are positioned dust filters and the lack of removable mb tray... i'd like to see what Rodny thinks about the Lian Li PC-A17, which actually I think is little better than this one (and also cheaper).
Lian Li one has also removable mb tray as far as I know.
dlospi 3 years ago
so many complaints. how the hell could something like this be kickass?
NolBC 3 years ago
really nice case, I like the dampening and ability to fit titanic size video cards in future :)
Vagmonster666 3 years ago
I would like to have this case to have a side fan, an easier way to remove the filter, and to have labels for the power, and reset button. since the reset looks like a power...
xtr1gunf00lx 3 years ago
yes, he did say shlong.
papooooog 3 years ago
@ 41 sec i could have sworn Rodney said "This makes it very shlong" hahaa
Falseproph3t 3 years ago 2
Yeah. :)
DerekFord95 3 years ago
LOL He does!
araz1994 3 years ago
i soo want to get a t-shirt saying The mother brd tray is nto removerble haah
warpenguin6 3 years ago
Or a T-Shirt saying I am wearing shoes with rubber soles which have excellent anti-vibration properties and won't scratch the surface :-)
shaurz 3 years ago
lol
xboxlive6 3 years ago
nice video .& a great case
m2uk550 3 years ago
what's a cp something else :p
for the hard drive?
donnei1992 3 years ago
lol look at the coolermaster cm 690, its almost the same
Toillettenwasser 3 years ago
Nice video there Rod. I like your videos, but everytime I notice you mentioning "Removable Mobo tray". Is that really such a big issue? How many times in the lifetime of the PC would someone work on Mobo replacements? Not much, right? I don't see that as an issue.
The top Air filter seems flexible and should not be much of a hassle to be removed.
What I would like manufacturers to do is to have a cover over the case USB / Firewire / Audio ports.
bandupatil 3 years ago
nice case ty !
alberto9911 3 years ago
"this is a kickass product"
Mupp1t 3 years ago
How can it be kickass when the top filter fouls when removed? Any advice on how to get Vista to accept sata drivers without a floppy drive? Thanks Rodney!
Rowdyeh 3 years ago
ottimo case.
nice review
sonZruleZ 3 years ago
good case
hussainmushahid 3 years ago
everybody is copying the 900 now... thermaltake, silverstone, coolermaster.
junkyjuice21 3 years ago
people were copying the silverstone tj07.
antec, coolermaster, thermaltake
CsS1337h4x0r 3 years ago
Truth be told.
destinationaeon 3 years ago
cool case
aznturtle1 3 years ago 2
Nice acoustic foam...
BigCowz 3 years ago 3
Wow Silverstone makes some clean looking cases. I really like the looks of this one.
MN12BIRD 3 years ago 2
Damn that looks nice.
Sy5temErR0r 3 years ago 3
Think I found my new case :D
XxGlamisDunerxX 3 years ago 3
sleek case. nice review
gnoLiscool 3 years ago 2
cool cool
Axcelaration 3 years ago 2
Nice review!
UnknownBallin 3 years ago 2
very nice case!
nexus213 3 years ago 2
Rodney Reynolds is the man
e4tshtanddie 3 years ago
verry nice as usual #D game man!
facci333 3 years ago 2
Nice!
CrialCrial 3 years ago 2
nice review
TriggerMediaValon 3 years ago