Not terrible but buy a set of polished black rims son.....dont paint your hubcaps lol looks terrible i kno i tried it haha believe me new set of kicks on the car will do wonders, not a fan of how the exhaust system sounds though : / but yea headlights dont look good on cobalt tinted try just buyin a set of halos with black chrome in em dude way better.
thats awesome man... my buddys cobalt is a work in progress too, i found the ss spolier for $ 115 on ebay and bought it for him for christmas. then he brought a body kit and had the spoiler and body kit installed, but he couldnt afford to get any of it painted yet.. but yea i found that gloss spray tint about 2 years ago. so i figured id just spread the good word to ya. your cars looking good.
@THEJ35U5 you can buy this can made from 3M called adhesive remover that you can buy from wal-mart or an auto store and you spray on the badge and let it soak on the adhesive on the other side of the badge but be careful because if it soaks too long it can damage car paint. Once its soaked you get like fishing wire or floss and run it underneath the badge and get the rest of the "sticky" stuff with the adhesive remover.
every body check my vids and hook me up with your ideas and comments, so far i have cold air intake, stage 3 kit, with turbo, new headers, chip mod, and power programmer, i just got new 17's put on, and i have a body kit in the garage that will be put on in a month, now i have a 08 cobalt ls and i want halo head lights but they dont make them yet, i no this b/c iv orderd 2 of them from sites that said they had them, but THEY DONT MAKE 08 models yet, and i have 17inch rims for peroformance
Hey man not to be a dick or anything.. i think your car has potential... But i think the tint on the heads and tails looks terrible... my buddy has a cobalt just like this and we used "Nightshade Spray on Tint" it works amazing, its a nice glossy smooth finish and it still emits a lot of light.. you can find it at any local auto parts store sych as O'reilly auto parts. its $10 a can but you can tint out about 3 cars per can. trust me its WAY worth it. Its cheap and easy! and Looks amazing
@fairchildz yea i got that on my taillights and it does work good especially the dupont brand that i used. and my car is still in progress cause now i am saving for rims and i had a SS spoiler put on it and its painted to my car...i will make new video if you want to see the progress?
i ad the 3M adhesive remover from wal-mart and then slowly pour it on the trunk above the emblem and slowly just pull the emblem off. make sure you remove or wipe off the adhesive remover cause it will remove paint. then when the emblem is off there will still be the adhesive on it so just keep using the remover and use your finger to rub it off and rinse with water. it also helps to use floss just to get the emblem off. thanks
the muffler shop and i decided on just switching to a 2.50" and the midpipe is custom made at the shop, i suggest you go to a muffler shop and get it done so you get what u want. and the super 44 muffler is the best muffler i have ever gotten-you wont be upset
why would you paint hubcaps black instead of getting new rims? it looks really dumb with black hubcaps and stick wheels under those. the rest of the car looks nice though
hey i can only make soo much money in the service and i will be getting rims in january then i will post up the new video, plus it looksbetter than silver so i painted them. and i haven't been home to get rims
well the plastic comes right off. then what i did is i removed the valve cover( if you look its like 12 bolts holding it to the intake) then buy some valve and engine paint and just paint it but let the paint bake on in the sun. Then be sure to put a new gasket on plus gasket sealer.
Not terrible but buy a set of polished black rims son.....dont paint your hubcaps lol looks terrible i kno i tried it haha believe me new set of kicks on the car will do wonders, not a fan of how the exhaust system sounds though : / but yea headlights dont look good on cobalt tinted try just buyin a set of halos with black chrome in em dude way better.
BlindSight1234 6 months ago
Did you paint your bow ties or buy them?
upfrontjoker 6 months ago
i have a problem with the engine power loss how i fix
rubcobalt 8 months ago
hey dude...
does your engine have a DOHC??
if so i wanna know where you got it and how'd you get it in there....
dyone3 11 months ago
thats awesome man... my buddys cobalt is a work in progress too, i found the ss spolier for $ 115 on ebay and bought it for him for christmas. then he brought a body kit and had the spoiler and body kit installed, but he couldnt afford to get any of it painted yet.. but yea i found that gloss spray tint about 2 years ago. so i figured id just spread the good word to ya. your cars looking good.
fairchildz 1 year ago
gay. period
tzook8 1 year ago
please buy some rims lol
MarcsMobileAudio 1 year ago 2
not bad car, get rid of those hub caps and buy a nice set of rims
PULLtheTRIGG3Rbitch 1 year ago
my car now has a painted SS spoiler...looks good! new video?
ALsBlkLS 1 year ago
how did you debadge the car?
THEJ35U5 1 year ago
@THEJ35U5 you can buy this can made from 3M called adhesive remover that you can buy from wal-mart or an auto store and you spray on the badge and let it soak on the adhesive on the other side of the badge but be careful because if it soaks too long it can damage car paint. Once its soaked you get like fishing wire or floss and run it underneath the badge and get the rest of the "sticky" stuff with the adhesive remover.
thanks
ALsBlkLS 1 year ago
@ALsBlkLS ok thanks a lot man
THEJ35U5 1 year ago
@THEJ35U5 Heat gun, plastic razor blade and adhesive remover such as All-sol.
CobaltBuddy 1 year ago
Comment removed
THEJ35U5 1 year ago
how much does it cost to "black out" the lights? and how much do black rims cost? and how much do tinting windows cost?
Snoop524 1 year ago
watd u use on the headlights n tail lights
armguffieproductions 1 year ago
@armguffieproductions hey you want a video on how to and wat product. and updated car video?
ALsBlkLS 1 year ago
every body check my vids and hook me up with your ideas and comments, so far i have cold air intake, stage 3 kit, with turbo, new headers, chip mod, and power programmer, i just got new 17's put on, and i have a body kit in the garage that will be put on in a month, now i have a 08 cobalt ls and i want halo head lights but they dont make them yet, i no this b/c iv orderd 2 of them from sites that said they had them, but THEY DONT MAKE 08 models yet, and i have 17inch rims for peroformance
Slitzz689 1 year ago
but i gotta say i like your engine bay..looks pretty sweet..
fairchildz 1 year ago
Hey man not to be a dick or anything.. i think your car has potential... But i think the tint on the heads and tails looks terrible... my buddy has a cobalt just like this and we used "Nightshade Spray on Tint" it works amazing, its a nice glossy smooth finish and it still emits a lot of light.. you can find it at any local auto parts store sych as O'reilly auto parts. its $10 a can but you can tint out about 3 cars per can. trust me its WAY worth it. Its cheap and easy! and Looks amazing
fairchildz 1 year ago
@fairchildz yea i got that on my taillights and it does work good especially the dupont brand that i used. and my car is still in progress cause now i am saving for rims and i had a SS spoiler put on it and its painted to my car...i will make new video if you want to see the progress?
ALsBlkLS 1 year ago
looking good man if you ever get tired of those headlight covers try using window tint.its cheap and looks as good =)
zerosk8ter9 1 year ago
where did you get the headlight covers from?
MrTroublemaker91 1 year ago
how much did that injen intake run ya? you see good results?
myersa31 2 years ago
about $250 and the sound and performance is very good, i recommend it more than the other intakes, its worth the money
ALsBlkLS 1 year ago
okay man does the chevy emblem leaves holes when you take it off? Or is it just 3M tape like the rest?
TinyWeyant1989 2 years ago
no no its just an adhesive that holds it on. it comes off fairly easy. thanks for comment!
ALsBlkLS 2 years ago
K man thx for the response... And you have a good looking car. Are you planning on getting rims or anything.
Oh and did you use fishing line and 3m adhesive remover or what?
TinyWeyant1989 2 years ago
The badge on the front bumper has four holes behind it. The ones on the drunk do not, they're just glued on and come off easily.
ncs553 2 years ago
no the rear emblem just leaves residue from tape which come off. and the front emblem has 4 holes for the pins to be guided on.
ALsBlkLS 2 years ago
very nice cobalt my only sugestion is tinting the windows to at least 20%
badboyzfirebird 2 years ago
idk this is the tint i got when i bought it.
ALsBlkLS 2 years ago
how'd you take off the chevy emblem in the back?
molerat253 2 years ago
Very carefully, apply heat, use something non metal, like a plastic spatula, wax when done =)
MS6FTW 2 years ago
i ad the 3M adhesive remover from wal-mart and then slowly pour it on the trunk above the emblem and slowly just pull the emblem off. make sure you remove or wipe off the adhesive remover cause it will remove paint. then when the emblem is off there will still be the adhesive on it so just keep using the remover and use your finger to rub it off and rinse with water. it also helps to use floss just to get the emblem off. thanks
ALsBlkLS 2 years ago
Where did you find the midpipe, cause I want to use a 2.25" Flowmaster Super 44 as well, and by the way, cool car
suburbanator91 2 years ago
the muffler shop and i decided on just switching to a 2.50" and the midpipe is custom made at the shop, i suggest you go to a muffler shop and get it done so you get what u want. and the super 44 muffler is the best muffler i have ever gotten-you wont be upset
ALsBlkLS 2 years ago
why would you paint hubcaps black instead of getting new rims? it looks really dumb with black hubcaps and stick wheels under those. the rest of the car looks nice though
mattnd123 2 years ago 2
hey i can only make soo much money in the service and i will be getting rims in january then i will post up the new video, plus it looksbetter than silver so i painted them. and i haven't been home to get rims
ALsBlkLS 2 years ago
where did you get your Valve Cover at my cobalt ls just had a plasek cover on it
allper2008 2 years ago
well the plastic comes right off. then what i did is i removed the valve cover( if you look its like 12 bolts holding it to the intake) then buy some valve and engine paint and just paint it but let the paint bake on in the sun. Then be sure to put a new gasket on plus gasket sealer.
ALsBlkLS 2 years ago