Ok so I have a Bmw 745i o4 and my Halos are out on both side an on the drivers side the whole headlight is out im online now buying bulbs on Partgeek.com how many do I buy
These Angel eye rings are available for E36 3 Series models, check out our site
To remove the corner light you need to recess the clip with a screw driver and gently pull the light towards you, and it should pop right out.
Unfortunately we do not carry any angel eye rings for non projector headlights, we do however have full headlight options. Which come with LED angel eye rings and Projector low beam housings.
@marcelzk If you have the clip-in type, you simply need to put the screwdriver in the same hole in the engine bay (as shown in the video) and pry the clip towards the outside of the car while putting forward pressure on the corner lens. If you have questions contact us at Stealth Auto. Good luck!
Instead of a towel, I used blue tape. I add a couple of layers on to the bumper when taking off head lights. The two bottom screws under headlights take the headlight out first and then you can take out bottom bracket. It would be easier to get to when headlight is out.
@jonsutubechannel haha mmm...iono....I mean in all honesty, if i were to say that infront of my friends, they would call me a faggot (not a cigarette but a flaming homo gay person) ha
Thanks for the video. I've ordered CCFL Angel Eyes for my E36 and they will arrive tomorrow :) . I know, that from BMW to BMW there is a HUGE difference, but I will still follow your instructions, just to be safe :)
3:12 this is where i break it lol.
iM3E46 1 week ago
Would this process be the same for a 745LI?
dorotwhy 2 weeks ago
please i need help can someone make a video how you install them on a vw touran 2005
karoletsimulator1 2 weeks ago
Ok so I have a Bmw 745i o4 and my Halos are out on both side an on the drivers side the whole headlight is out im online now buying bulbs on Partgeek.com how many do I buy
AcyBaby704 1 month ago
in the instructions book that came with my angel eyes says"easy DIY" but after seeing this turns out for me that is quite a big job. lol
babyhollywoodisdead1 2 months ago
do you remove the head light same way for a 740il 95?
NEY310LA 3 months ago
I am planning to purchase a set of angel eyes/halos. Do I have to buy HiD bulbs for high and low beams?
XxSylentChaosxX 3 months ago
These Angel eye rings are available for E36 3 Series models, check out our site
To remove the corner light you need to recess the clip with a screw driver and gently pull the light towards you, and it should pop right out.
Unfortunately we do not carry any angel eye rings for non projector headlights, we do however have full headlight options. Which come with LED angel eye rings and Projector low beam housings.
Halo's and angel eyes are the same thing.
StealthAuto 4 months ago
Can you still put on angel eyes even if your BMW doesn't have a projecter
PrinceRocky561 4 months ago
Is there a difference between Halo and Angel Eyes?
HasteTheDays 4 months ago
hey man will this work on my '94 325i? please respond i'd really appreciate it
robertparkersmu 5 months ago
I have a 1992 BMW 325is. Will this work with my car?
SasquatchGroove 6 months ago
i go a '99 328ci e46, but i dont got the screw on top of the corner light. so i think its a clipping system.
i tried to pull it out, but the corner light it didn't came out.
should i try search the screw or jank it out?
marcelzk 7 months ago
@marcelzk If you have the clip-in type, you simply need to put the screwdriver in the same hole in the engine bay (as shown in the video) and pry the clip towards the outside of the car while putting forward pressure on the corner lens. If you have questions contact us at Stealth Auto. Good luck!
StealthAuto 7 months ago
all i know is that you are my hero
and NO HOMO i freaking love you!!!!!
thank god somebody made a good video you're the best
22REDzOne 8 months ago
@22REDzOne Thanks for the great compliment! We do our best to help you out.
StealthAuto 7 months ago
Instead of a towel, I used blue tape. I add a couple of layers on to the bumper when taking off head lights. The two bottom screws under headlights take the headlight out first and then you can take out bottom bracket. It would be easier to get to when headlight is out.
JCruzify1 10 months ago
tkoautoparts web
TKOAutoPartsdotcom 11 months ago
Coupé is not pronounced "coup", it's pronounced "coupay".
Bloody hell.
colin4393 1 year ago
@colin4393 But we are in america. It's pronounced coup. We don't say stupid stuff like bloody hell =]
jonsutubechannel 1 year ago
@jonsutubechannel It doesn't matter, you Americans have butchered the bloody English language! haha.
Bloody hell is a great word.
colin4393 1 year ago
@jonsutubechannel haha mmm...iono....I mean in all honesty, if i were to say that infront of my friends, they would call me a faggot (not a cigarette but a flaming homo gay person) ha
jonsutubechannel 11 months ago
@colin4393 he's american that's how we say it
nintendo007 9 months ago
Thanks for the video. I've ordered CCFL Angel Eyes for my E36 and they will arrive tomorrow :) . I know, that from BMW to BMW there is a HUGE difference, but I will still follow your instructions, just to be safe :)
KaloyanBeshev 1 year ago