How to break your crane

[oldfart387]

1:49 too long.

[landykid60]

slowly, slowly,,

[motoxjosh616]

How to be a jerk off, post dumb videos with no action, I have more action sitting on the toilet!!!!!!!!!!!!!

[NickandFriendsCo]

i liked the part with the crane

[ltrich50]

Something gonna happen here?

[ehsnils]

A swinging load is always bad when operating a crane. Especially if you are near the rating for the crane already, but swinging stuff is a danger for everyone around.

[EvAbLaZiNgGaNgA]

this video is bere cunt

[havenstein1]

you knee fucker i'll just got more bored do not put this kind of shit on youtube.

[YaterSpoon86]

The operator compensated with the boom to control the sway.

[kejkatie]

This must be THE dullest video on here (sorry)

[MicahCooper11]

That happened to my weiner once

[lookinaround23]

safety pays boys the boss may be mad, but not as mad as he is when he writes the check to get it all fixed!!! aint no rodeo and it aint no race, slow steady continuous movement.

[mrhh2010]

how does the boom break,,,, it doesnt,,,, and NO way does that silo top weigh 60 ton having worked in heavy hauling and lifting all my working life i can defo say YOUR FULL OF SHIT

[bigredtruckfromal]

@mrhh2010 The top piece was stuck, generating a load over 60 tons. When it broke free, that caused the boom to snap back. No, it doesn't weight 60tons normally. But the load he put on the crane was over 60 tons trying to break it free.

[mrhh2010]

@bigredtruckfromal how do you know it generated a load of over 60 tons, ALL SPECULATION. Bottom line is driver fucked up an as always yanks dont know what the fuck there doin

[bigredtruckfromal]

@mrhh2010 I know because I was there and I asked the operator...and just an FYI, this was in Alabama

[mrhh2010]

@bigredtruckfromal still in yank land an still a big fuck up using prehistoric tools to do a job

[TheHammersdude]

@bigredtruckfromal Yank means american... is Alabama not in america?

[bigredtruckfromal]

@TheHammersdude Yankee is also what southerners call people from the north, thought it was being said by someone in the US, not a Brit...my mistake

[sx727]

@bigredtruckfromal i think the operator was feeding you a line dude cause you can clearly see the boom go down first. then it comes back up really fast. that tells me probably a friction rig and the boom ran on him cas he didnt cover it with a drum and probably didnt have enough throttle when he threw the boom in. if he would have been pullin up on it you would have seen it come back first. it doesnt look like it is hooked either.

[markcaetano]

@bigredtruckfromal Just casually, it's still in america.

[TowTruckJoe1]

@mrhh2010 Yep. No yanks in ALABAMA. LOL...But a fucking predicament none the less. I'm glad it wasn't me that had to sort this shit out.

[dedeede34]

@mrhh2010 the fuck u talkin about? how we yanks dont know what were doin....someody needs a history lesson

[bexnomad]

@dedeede34

you got no history... stupid Yank!

[lithkoman]

@mrhh2010 brush your teeth

[RonShawLargo]

@mrhh2010 So... I gotta ask... What the hell does being an American have anything to do with what happened here with this crane? I mean, do I need to tag you with some Stupid British videos or something. Nothing is worse than the arrogance of someone thinking that because of where something happens, thats the issue. This could have happened anywhere. For someone trying to be taken seriously, you sound stupid by making remarks like that!

[Altejago]

@mrhh2010

Settle down grandpa, not everyone here likes know it all yank haters....

[YaterSpoon86]

@bigredtruckfromal So what you are saying is it wasn't the crane operator's fault? Correct?

[ls3drew]

My two cents. Looks like this operator MAY have grabbed for the hoist and accidently grabbed the boom instead. And there is no way that lift was 10 tons over capacity, the dynamic forces being generated on this crane from all that drifting would have sent it falling, plus the section that may have taken damage would have certainly failed................. I see possible damage to a boom section here, not the entire boom.

[zyxl1]

i still waiting for the break

[beaglebob]

I might be wrong here but after working on sites for over twenty years i've never ever come across a tower crane that can lift 50t.......

I'm going to be totally honest here bigredtruckfromal and say you are full of fucking shit!!!!!!!!!!!.

[bigredtruckfromal]

@beaglebob well, apparently you've never worked on the sites with cranes the size of what we need...

[jashobeam2006]

@beaglebob That does not look like a tower crane, and a Favco 760 can pick 60T.

[xXskull1candyxX]

im going to my local crane now

[jimbo80982]

I expected a huge crunch and a big collapse but no ... silent...

[nerone76rotw]

Panico ..Pauraaaaa!!!

[Dillonfromforks]

That video gave me the chills. I couldnt imagiane swinging 60 tons into my boom like that.. At least he didnt drop it

[ibew196]

It appears as if the operator boomed down too fast and the load swung out, he then paniced, and then on the swing back to the boom he OVERcompensated, and thus brought the load into the boom, I've learned this in crane operation, I dont care WHOS in a hurry, nice and slow. DONT BE A COWBOY

[aam44Nose]

couldnt agree more no matter how much someone rushes u, u must ignore them and go slow. im 18 n my dad wants me to operate faster but i just ingnore him n others becuase if something happens they gonna blame u

[criscobucketeer]

well that ws ....u eventful

[criscobucketeer]

@criscobucketeer i meant UNEVENTFUL. i want my 2 mins back

[jamesandrew2000]

Title should read; HOW TO BREAK YOUR WILL TO LIVE.

[bisstube]

hmmm...looks quite normal to me. but im not a crane operator so...i guess its broken.

[hixxtimm]

"wow"WTF,this guy thinks its wreckingball,lucky it didnt come crashing down

[angrybig]

unnecessary waste of time. give it back to me

[pf126p]

I would have dropped the load on the first sway. I would say that was pretty lucky.

[SFtruckerWolf]

Load sensors are for girls.

[xxfm12xx]

i'd say he was shitting it in the cab!!

[tn5254]

yawn

[drummingfordrunks]

arent there supposed to be stabalizers  from the crane base to the building ?????

[brmadman4455]

If you don't know what you're looking at, this is boring.

[shabadoo384]

This is NOT good operating skills! That boom is high tensile steel, very strong but also very britle. This is a bee's dick away from being a fatality. if he had his computer set with the wrong boom configeration he should not be doing these sort of lifts.

[madisonelectronic]

I think this thing came close to being a pile of scrap metal.

[bigredtruckfromal]

Since when is running your load into the boom standard operating procedure?

[haha48]

@bigredtruckfromal looks like the wind caught it..

[crazieN8]

everyday crane OPs?!!!!! Your insane! Where the hell do you work that this is protocall?

[gingermoose]

This definately looks like its been speeded up. Sure its not just the wind making the crane sway? besides that its a f****** boring waste of time to watch!

[travishartley]

thats so fucked man i saw cranes sway before but nothing like that kudos to the man behind the sticks

[Rossman012]

where was this at? Whos crane?

[bigredtruckfromal]

I can't say where it was. But the crane was being rented by the mill

[wolfearie]

WTF.

[gentlemobster]

hey fools the title say it all, the crane got messed up. Luckily nobody was hurt!

[juan98hawk]

vete a la rechuchatumadre

[ripcurl010]

fucking turd

[yorchreloaded]

idiot

[fargpeace]

again WASTE OF TIME ........

[becky645]

Waste of freaking time. Don't post shit like this when NOTHING interesting happens. Stupid.

[Aprenticewoodspoiler]

I dont get it nothing broke

[bigredtruckfromal]

Right at the beginning, the load swings into the boom on the crane, which bent the supports. The crane company had to replace the entire boom after this.

[Aprenticewoodspoiler]

Thank you

[THEJEDEYEMASTER]

But it didn't break.

[ThunderDonkey]

so it's freaking boring.

[gaterskinz]

i think he meant how to break your crane from swinging recklessly.. notice how he booms into the load to stop it from swaying... good operation skills if you ask me

[juliogbox]

They delete hot women videos, but keep this shit. This wolrd is so unfair.

[CNJDUDE]

WELL???

[1drumdave]

The operator was smooth as a train derailment. Couldn't figure out if it was going up or coming down. He held it in that area long enough. Boom it down, or swing the f**ker right and go to the ground with it.

[a217andy]

WHAT A C U N T

[PackageSeverance]

fake, probably a simulation/game

[odmcarp]

is it over, i fell asleep. did something happen while i was out? i when to work, came back 8 hours later and this video was still going. well, good night

[tzxt123]

LMAO!!!!!! so true.

[JuanCho3D]

boring!

[5up3rAIN002]

"How to break your crane"!? but the crane didn't break!!!

[Miner0267]

@5up3rAIN002 one noob leader 8 nublets.

[Vancitiboi]

@5up3rAIN002 Shock loading the crane to the point of bending the boom qualifies as breaking the crane. It doesn't have to fall be be broken. If the boom was bent then the whole thing would have to be taken down and a new crane erected. The operator was probably shitting his pants

[Dutch3DMaster]

Looks like this was shot on an oil rig.

Also explaines the breaking waves-sound.

I think a crane on an oil rig is probably considered one of the most important tools, but I could be so wrong haha.

[farrellhunter]

How to be a wanker...

[TowTruckJoe1]

@farrellhunter LMAO. How appropriate

[xbackflipx]

How long does the crane operator need to get all that shit out of his shoes?

[coastalman226]

bet it took him along time to move after that with his underwear stuck up in his buttcheek's. Wonder if he quit working as a crane operator?

[dustin69798]

y the hell didnt it break??

[watchyourst3p]

WTF!

I wont break!