Invert Mini Trigger Bounce Problem

[foxracingcrazy]

At least it a good defect

[InvertMiniFreak]

Is that the techpn website on the computer in the background

[polskiskater]

Kid, if your gun doesnt make a clicking noise, that means your eyes are on. And i had the same problem. I changed the battarie and it was fine.

[nbdemo333]

r you sure the battery wasnt just dead



[paintballexpert97]

check board settings and trigger adjustment

[rumblefighter97]

What's wrong with my mini it dosent even make a clicking noise when you squeeze ur trigger pls help

[paintballexpert97]

@rumblefighter97 put your finger in the hopper socket and you will hear it this is

because your eyes are off and doesnt detect a paintball so it doesnt shoot

[remix476]

try to replace the microswitch

[InvertMiniFreak]

@remix476 minis aren't microswitched idk what it is but i know its not a microswitch

[zackrosario]

i faced tht prob once too...but it fixed when i re-adjust the trigger.

[thedeem0N]

so...take out the stock board, sell it on a Paintball Forum Site, Order a NEW one from Empire (Invert), take out the stock trigger, sell it, give it away, keep it, I don't care, then put it all back together (with either the replacement board from Empire, or Buy an Upgrade Board (if anybody even makes one)...that should fix it & if it doesn't then hell, try to enter tournaments with it anyways...

[ReaperBRAD]

is it good for it to bounce

[uofkboy]

You need a new battery; The red light tells you that. The lack of battery power is making the board turn to different modes than it should be in.

[paintballgod8795]

send it in

[xxbukwildxx]

mini dose the same thing but only when the batterys low so put in a new battery and it shud be fine

[eatzz1]

its prob ur bolt have u put it in properly cause sme thing happened to me i put the bolt bak in then out keept on doin that it worked after a while orr ur trigger is 2 tight try messin about with the ajustment on the trigger sand lossen it up

[PAINTBALL870]

@davinmills hahahhahahahhahahahahahahaah lolo,lololol  wow

[orreznorre]

Turn on the eyes and sett the BIP settings to about 5, maby higher and then shoot some paint and the bounce will disepear

[chispaworld]

It wasn't a battery problem, the main problem was the connection between upper board and the board. changed boards an everything works flawless.

To those saying BS, no it wasn't a battery problem, no it wasnt on full auto, and no it wasn't the magnet.

[wubangazz]

so stupid u have to mess with the magnet to change that

[fireball4008]

Are you sure it is trig bounce, I would recommend first resetting board to factory settings.

[skullwing04]

ill buy it

[donzinms]

red light= low battery! actually READ your manual!

[gndarklight]

yea prob on ramp

[kraft41dude]

its on full aouto

[chispaworld]

Baterry wasn't dead, but fixed the problem anyway. It was the trigger activation magnet, changed it and works flawless.

[zachisevil]

HAHA! you didn't fix it!

lol

I had this same problem, it would sometimes go full auto just like this. I wound up switching my sensor board out with my friend's and now both of ours works fine.

[pitcher1236]

@chispaworld it works flawlessly* there's nothing wrong with being grammatically correct

[javierel]

like basher said, low batteries can sometimes cause this. if that doesnt work try adjusting the trigger screws to change the activation point, and if that doesnt work, move the trigger out more and put some rare earth magnets on the back of the trigger

[chispaworld]

I think it's something in the connection between the foregrip and sensorboard, It seems that it depends in how tighten and how you're taking the foregrip, if it bounce or not...I've tryed without the grip and everytime the foregrip shakes, it shoots.

[basherbyrne]

your battery is dead!

nothing else!