SZF CNC-Crash

[b2dmastersniper]

so much power

[MetalGods]

go to 48 sec

[CTHARDCORE606]

"OH, so thats what F300. is in the program"

retards

[SteamingObe]

The vise lifted before it even made a x y move. I've never had a vise lift in my live. I'm curious as to what was in the spindle, weather it be an endmill, or say a 2" indexable mill. That's just pure stupidity. 

[Schmuhfix]

Feuer aus der Spindel... die ist wohl hin ^^ Hätte er das Potti besser mal langsam aufgedreht. Dafür isses da !

[pawelgatorade]

what did you expect from sombody who keep his camera sideways

[left4deadtheone]

Schlecht

[Unimatrixzero1]

Aua nicht hauen!

[MrXtacle]

If someone did this to my machine, I would slap the shit out of them :<

Well, I work in a Mazak, so you would be a pretty shitty programmer for something like this to happen.

[astriknon]

Damn, that thing took some time to alarm out. Once did that with a 3/4 endmill at 1500 rpm on HRS. Accidently left out a G01 where my last movement was a G00. Needless to say, i never seen a carbide endmill explode like that.

[mreeuwij]

that was not fast enough, faster.

[rivercarper01]

FMAX 

[MrNeoFromMatrix]

0:45

Ok, des hat ma gsegn, des war jetzt zvü xD

[guppyslayer1968]

@Polybun: Spindle bearings? That whole fucking machine was totaled except for the control box.

[Mountaindoodoo]

@guppyslayer1968 lol doubt it.

[VbGang1]

nice in den schraubstock reingefahren

[fall22123]

Never saw sparks come out of a spindle before.

[Polybun]

well, looks like the spindle bearings are done on that one.

[75SaJaPa82]

looooooooooooooooooooooooooooo­oooool

[thundergod1988]

HAHAHA Geil!!

[MegaJohnhammond]

is that a horizontal machine? Or did the guy holding the camera fall down drunk?

[JTMarlin8]

HAHAHAHHAHAHHAHAHH FUCK YOU

[DarryllK]

All I can say to that is suck shit! If the prog was dry run first or checked thoroughly that wouldn't have happened.

[ROCKNTV1]

lol, and a good light show @ the end

[stillbashingmetal]

@ROCKNTV1 HaHa!

[lrrhcb]

thats what happens when you have people barely qualified to operate the vice running those machines

[stillbashingmetal]

@lrrhcb So true,my friend, so true!

[KChurch86]

Protip: Don't do that.

[rick371]

jesus christ!!!! thats what happens wen u put a G00 instead of a G01, done it before but not quite on this scale..only snaped a 10mm end mill

[torifan1976]

sparks from the gage line means the taper is pretty much fuked.

[adisharr]

Wow that's the worst crash I've ever seen lol :-P

[THEbaSeFreAK]

haha Germans ^^

[nilshasser]

@THEbaSeFreAK no, austria

[bigjayrawls]

G01 not G00

[C7H042]

@bigjayrawls At least with a low feeding...

[dj6927]

OK students. See how the tool is very close to the material? Now turn the coolant on and move the tool in 8 inches. OH SHIT! I mean 8 thou. Oops!

I thought like a lot of other people did. Bet it will never run as well again.

[dtiydr]

That gotta cost.

[xPoPo07x]

dry runs save spindels

and vices

and tooling

and time

that does suck though good luck when you get it back up and running

[milico83]

excelente vídeo ademas tendré mucho mas cuidado a la hora de operar la CNC. y lograr aprender del la reacción que tienen estas maquinas cuando colaciona la fresa en fin.

exitos

[StickerMedia]

Hahaha, that's fucked up!

I did the same with a Hardmetalbit 8mm, but it survived!

[flolito14]

"Ok do hot ma jetzt gsegn dos woa zfü! " ...jap damit könnte er Recht haben :D

[Mitsugejl]

A zero too much punched in at the feedrate perhaps?

[rivercarper01]

Even the best machinists have a crash from time to time, just like valentino rossi possibly the best rider ever, crashes out of races.

[Roger674]

Untrue when your learning its fair enough if you have a crash.

If your a good machinist you won't crash like me and i've only been turning for 2 1/2 years!

[rivercarper01]

@Roger674 Well, best of luck to you, I hope you continue with your good machining practices.

[Engelwerke]

*Jo, des hot ma gsehn, des woar zfü* Richtig, hat man gesehen. Ich tippe mal auf Wiener Kollegen.

[Snobel]

WOWO!!!!! BURRRNN!

[xjohnson42]

haha yes!

[XAR1862]

AUSSCHUSS....MUAAAAAAAKS...



[XAR1862]

AUSSCHUSS....MUAAAAAAAKS...

[jtjoser]

For all those fighting if its a horizontal or vertical.... use ur brains and look at the coolant drip! VMC... Gravity gives it away...

[tlsumner]

@jtjoser

LoL ! Answers to the most complex questions can often be found in simplicity.

[jtjoser]

@tlsumner

lol. Tell me about it! These are people that only use 10% of their brain.

[helrob75]

respect, at least 20000$ repair, your boss surely loves you

[TheDanie1988]

hahah wie geil is das denn hahahaha scheiße is schadenfreude geil hahahah

[FeurichChips]

Die Spindel ist platt oder?

[HardstyleScythe]

"oke des hot ma gseng des woa zfü"

lol so gschmeidig bleiben muss man mal ;)

[dtiydr]

When glowing sparks fly from a bearings on a CNC something will starting to cost, especially when its the one in the spindle.

[vihnu]

dryrun with machine lock on would have prevented this. and after that dryrun with imaginanry pice " floating in the air"  would have saved you from this very expensive crash. always double or triple chek every thing, nice crash tho.

[thchris]

hahaha.. die stimmen dann im hintergrund "uhhh" "aaahh" "ohhhh" xD



[LameBoy0815]

Disgusting!!! Big LOL

[krisjk2]

That whole machine is scrap now.

[joleenmorganjohn]

Wow! I've seen lots of fireworks from the tool or evan the holders, but never from the spindle taper itself. Must have been alot of damage on that one. Every operator,setup man,programer, and machinist alive has done(or will do) some kind of crash like this. CNC or manual. I guess the machine is not new no more!

[cooldudejm2007]

WOW... haha not bad im a second year student just started programing cnc mill with Mas. cam and wont ever do this but stuff happens ]

[drummerboy67003]

Hearing that spindle just made me cringe. I wouldn't even tell anyone. Just clock out and go back to McDonalds. I've seen a 2" carbide endmill shatter into dust. Thank god the supervisor did and not me.

[MWL4466]

@drummerboy67003 Yes that's true, just start pushing your toolbox out the door!! And yes, it's usually the supervisor or boss that does the stupid shit like this! That's how they become supervisor's.

[BADFISHHHHHH]

10k spindle

[PaulyThaDon]

Holy crap that moved the whole vice !!! Big crash lol,I had a high speed drill shatter into my stomach once messed up the z axis. had no glasses on was so lucky

[AndoCommando3]

that......was.....awesome!!!!!­!!!

[alderaforall]

time to take the walk of shame to the office and tell the boss what you did. Ah well, this shit happens to all us, no one is immune.

[Galfonz]

It's easy to joke about this happening, but the machine tool company should look into the design of its user interface. If the interface were designed properly it should be very hard to do this. For example in a machine this expensive how many % extra would it cost to install 3D scanners to look at the tooling and setup and avoid this? I'm thinking one "save" would be worth it. Also, setup would be faster because people wouldn't take so long checking with a machine backup.

[schlaznger]

when the misterious sparks come from the tool the machine does not work very good anymore. Just an observation

[dpamidon]

yah, I'm a repair tech. I see this shit every day, most likely a core spindle. bearings are shot. lol

[jeetendrag10acc2]

jesus..thats frightening

[ChuckLukas]

Typisch Ösis :) 

[SPUNKKK]

lol, "trainer crashes the whole thing!..." - Did he get to pay for it then? :)

[dtiydr]

That gotta cost.

[tolletapirhuefte]

ooooooooooooh shit never saw this. thank you god

[Rolf990]

Die Spindelhersteller freuen sich!!

[MoserHias]

Spinndel is broken - i think^^

[rikk06]

omg lol noobs. who set the height offsets for that?

[SPUNKKK]

sparks from the spindle ... that cant be good

[chuychele]

wtf

[jmar1371]

Oooops... That computer isn't a very good machinist.

[boomersoonerks]

hmmm... sparks from the gang... yeah there goes $40,000....

[SerbianResistance]

das lager der spindel wird wohl gelitten haben ... und zwar derbe

[davearmie]

Sparks coming from the GAGE LINE! Something tells me that mill ain't gonna be up and running for a few more days.

[josefhoedl]

holy shit

[WMaxx91]

Housten, we have a Problem... A broken spindle^^

[MISTOdodo]

pwned

[DekuTreeOfKokiri]

Well time to look for a new job

[BandTheGathering]

whaha i hope i dont do that on school xD

[UsaLaThEmAstErWelDEr]

pretty bad:)))

[SteamingObe]

duh huh hhuh i think we got a problem George...

[kuei1248]

What do you expect from a guy who holds his camera sideways?

[jsnsykes]

@kuei1248 it's a horizontal you noob.

[kuei1248]

@jsnsykes Your mom is horizontal!

[killsomething1]

@kuei1248 pretty sure this is a horizontal machine...guy...

[jh4dc5s]

@kuei1248 I don't think he's holding the camera sideways. It looks like a Horizontal Mill.

[jh4dc5s]

@jh4dc5s No wait i think he is holding the camera sideways. Lol what a dumbass.

[ruscccpsia2010]

@kuei1248 It could be a horizontal spindle machine too.

[blow2184]

@pillemann1990,

die größe des werkzeuges spielt eigentlich keine rolle... die meisten crashs passieren im schnellvorschub (eilgang) und bis der abscherstift durch is, oder bei neueren maschinen die sensoren dazu kommen die maschine ab zu schalten, steht die schon lange auf den angegebenen koordinaten...

[Pillemann1990]

"gut" maschinen (sage ich mal) erkennen den crash und halten von alleine an..... das geht aber nur bei etwas größeren Fräsern.

[nvidiafighter33]

keine ahung haste

meinst du ne hsc maschine hält an

die hat so um die 50m/min vorschub

und bis 3g beschleunigung m

die merkt ned wenn sie in den schraubstock reinfräst

und wenn doch dann kann sie den HM fräser ned von 12000 upm auf 0 in 1 s. runterdrehen

[gummel82]

@nvidiafighter33 was bist du eigentlich fürn spacken...klar merkt die das ned, ein abscherstift ist auch ein mechanischer stopp du homo!

[LowRoller420]

it's a Hermle too.

[trati92]

der kommentar am schluss is ja geil

"des hot ma gseng des woa jetzt zfü"

[werder21a]

wo bleibt der probelauf bei einzelteilen sonst hies ja zweizelteile :)

[nodnarbnoob]

goodbye spindle and rotary table

hello 80,000 euro invoice

[WMaxx91]

Wie sagt unser Ausbilder immer?

Bei Probelauf, immer Hand am Vorschubregler ;-)

[bastian4434]

@WMaxx91 hast Einzelsatz vergessen ^^

[WMaxx91]

Ups, ist auch hilfreich^^

[RaVeN85]

it made nice sparkles lol

[fillerupagain]

HaHaHa! Glad thats not my machine!

[Budere]

Alter das wars. Übel....Aber wie sagt mein Abteilungsleiter? Wo gearbeitet wird passieren auch Fehler. *g*

[ydna2]

Looks like the tool dug in and the taper was grinding....goodbye wallet

[account0990]

versuchs mal statt g00 mit g01 ;-)

[speedfightLC]

Das wird aber mit Sicherheit keine DIN-Steuerung dran sein.

[marcoduradoni]

............ :|

[levisalo]

Ow ow ow ow ow ow!!!!!!!

[geremdu85]

yeeeeesssssssssss!!!!!

[Baderluck]

@marcoduradoni: Youve ever heard of HSc or G0? i guess no...

[philldk]

holy f.. bunch of morons! ever heard of using "grafic" before running the real program!

[SerbianResistance]

@philldk if grafic is correct, it can also crash, dumbass!

[kuei1248]

@SerbianResistance Yeah, especially in Mastercam's solid verify. For some reason it just can't simulate properly.

[insiderman01]

so ein scheiss haben die denn schraubstock einfach da rein gelegt oder was ^^

[KMXKMX125]

Respekt!! Also wenn das bei uns vorkommen würde oha... aber gescheppert hat das ja ganz gut und der kommentar hinterher zu geil^^

[LaxKingg]

wooow dude.. im studying how to run these right now.. thats freaky shit

[sucker1st]

ja fett, volle punktzahl ^^

[marcoduradoni]

s18000m3

f12000???

you are crazy?

for end mill of this diameter is enough s6000 and f3000....

your boss and the technic are incompetent for me...

[Kizmox]

Ever heard high speed machining?

Modern large diameter (15-25mm) carbide tools can take speeds like that without any problems when cutting aluminum.

[account0990]

Wenn man im eilgang fährt sollte man nicht im Material stehn ^^

[redzmvt]

I zigged when I should have zagged!SAHWWEEETTT!!!!!

[monozxr]

You idiot!!

I think you dont know anything about safe clearence? eg G00 Z100.?

[smallboss100]

Gratuliere dem Bediener. Ich hab auch schon einige crash gefahren aber so gefunkt hat´s noch nie.....

[Cabride]

Spinel glaub ich auch eher weniger. der Keilriemen wird gerissen sein, dess kommt da schon vor.

[DaBenni1]

du hast null ahnung, wenn ich schon das wort "keilriemen" lese, lebt wohl im 18. jahrhundert oder?

oh man, keilriemen bei ner 5 achs-cnc mit 18.000rpm...

ou man

[thchris]

doch bei hurco schon ^^

[sorojan]

@Cabride

Keilriemen XDD

Hammer

Werkzeug wird direkt angetrieben

[gummel82]

keilriemen LOL wie hinterblieben bist du denn? warum die maschine danach automatisch angehalten hat wird wahrscheinlich am abscherstift gelegen haben...ansonsten...adieu zugspindel ;)

[suppiiiSchalli90]

Schlimm genug das man sich beim ansehen den Kopf verdreht.

Aber wie zur Hölle habt ihr das geschafft? :D

War der Schraubstock locker? Aber deswegen geht doch net die Spindel futsch oder? Da zerreißt es doch eher den Fräser..

Hab mal rechteckiges Flachstahl hochkant eingespannt und zack hat es rausgehauen :D Oh man da hab ich mich so scheiße gefühlt das mir sowas nie wieder passiert ist. jetzt überleg ich mir immer 5mal vorher wie ich mein Material einspann :D

[bhDirlewang]

jawoll

[freedownassbiatch]

jo des woa z´fü

[Jasper0379]

spindel ist schrott soviel ist sicher!!

[bastiboy16]

das ist richtig so

aufgezeichnet  note: +1

[mariuszmuniak]

fajnie. wyrwało to imadło. :)

[x106erFreakx]

sauber^^

[rossxchristie]

rapid movements are always dangerous if not proven!!

[PanWuWu]

Österreich!!^^

[victornajara]

LoL

[x69XhArDsTYlErX69x]

was habts ihr gmacht.?^^

[thchris]

die oessis :)

[gomichigan]

This is why you should always single block the first piece and proof it out. What a mess!

[theicebear2009]

wenns mal knallt dann richtig^^

[ctownsdelaval]

oops

[TheFlappes]

das nächste ma den schraubstock richtig anziehen :D

[thebigviper]

hehe ......das ist cool .. !!

Muss ich bei mir auffe arbeit auch mal machen .....aba ich mach das mit Upgrade ....OHNE KÜHLUNG :D :D

[darkcover09]

Job shop owners and machine tool operators will be talking about this new CNC from Siemens.

The CNC EyeTeam has just broken the story. Ive copied their news video on my YouTube page.

[TheKilja]

typisch szf halt *g* fohnsdorf rulezzz

[futzi122]

wie geil

zum Schluss wie er sagt:" Ok, des hot ma gseng des woa jetzt zu vül". Das ist Dialekt und heisst: "Ok, man hat gesehen das war jetzt zu viel."

[Behigh2000]

was zur hölle habt ihr gemacht?? :D:D

war die maschine neu oder gebraucht gekauft??

vielleicht die kugellager führung am arsch hatten wir mal dann hat die einen satz nach hinten gemacht und mir is der messerkopf entgegen gekommen

[Cheremon0815]

ohhh ja 20000 für ne spindel biste dabei ohhh ohhh

[FatihSultann]

WOW

warum schaffe ich sowas nie?

[TheSpike1984]

Damn, mein chef würd mich killen!!!

Derber Crash

[Slaytanic454]

Damn, what the hell kind of tool were you using?? You'd think the took would snap off before that shit happened...

[Asdpodkjas]

Der Schraubstock wurde nur hingelegt ... XD

[HardcoreMusik]

Wäre der Schraubstock richtig fest gewesen, wäre das nicht passiert ! Entweder der Fräser bricht oder das Teil fliegt raus, aber der Schraubstock würde halten. Außerdem ist das gar nicht so viel, falls die Daten stimmen wäre das ein Vorschub von 0,66mm / Umdrehung.

[YoDaPro]

Also nicht so viel ist übertrieben. Bei Kunststoff vielleicht... aber alles andere... Denke aber auch, dass der Schraubstock ned fest angezogen war :P.

[tornaci1977]

neue Spindel Kollege :-)

[WMaxx91]

Heftig!

Spindel muss wohl neu ausgerichtet und gelagert werden.

Krasse Scheiße.

[Horexsuechtiger]

Des is abartig hart!

Den Fehler macht der nimmer. Aber die reaktion is geil: Jetzt hat ma gesehen des war zu vüil....

[GUINILERA]

Z- Würger Crash ???

[baccus61]

My god! My worst nightmare. Now I know what it looks like for real and I will definitely be checking twice before cutting in the future.

I hope you worked it all out and got it back up to scratch.