Added: 5 months ago
From: bearishtrader
Views: 24,723
Sort by time | Sort by thread (beta)

Link to this comment:

Share to:

All Comments (63)

Sign In or Sign Up now to post a comment!
  • 4hrs @ 12amps in a super insulated container add water......... steam? If it works?> put it up online "live" for 3 days without 12amps of input. What is the Voltage input? @ 120v x 12a 1440 w @ 220v x 12a 2640w @ 480v x 12a 5760w 1 100w light bulb .833333333amps @120v or 1 100w light bulb .454545454amps @220v ????? Hope it works Was my grandfather right when he said----------- Wish in one hand sht in the other and see which fills up first /???
  • unloading the reactor is astonishing :)

  • Comment removed

  • I couldn't see the back side of the container , to see if the hose was still attached, the big insulated steam hose ?  lol.

  • lets have one i can get rid of my water tank and use this instead what a great shower ill be having

  • Clamp meter will give False readings at low amps. (below 1 amp)

    nice video.

  • Looks it work s like a electric stove.With input 2.2Kw, out put boiled water and stream.

    Where is the proof it can work on self-sustain mode for a long term with low energy input but high energy output?

  • SO MY REASON TO BELIEVE THERE IS

    CARBON NANOTUBES

    IS ALSO cos can contain Y-RADIATION (gamma rays) at least in part....

  • FROM

    NEW ENERGY TIME

  • There are five known stable isotopes of Nickel, and here on Earth they are found in the percentages shown in the chart above. These isotope ratios are the same on Earth as they are in meteorites and in the Sun, and are pretty universal to any sample of nickel naturally found here on Earth.

  • If you want to create copper from any of these elements by adding a proton (hydrogen nucleus) to them, here are the reactions you're looking for: * 58Ni + 1H → 59Cu*,

     * 60Ni + 1H → 61Cu*, * 61Ni + 1H → 62Cu*, * 62Ni + 1H → 63Cu*, * 64Ni + 1H → 65Cu*.

    That doesn't look so prohibitive, does it? Of course,

  • there is the fact that you've got to overcome the tremendous Coulomb barrier (the electrical repulsion between nickel and hydrogen nuclei), which -- according to our knowledge of nuclear physics -- requires temperatures and pressures not found naturally anywhere in the Universe. Not in the Sun, not in the cores of the most massive stars, and (to the best of our knowledge) not even in supernova explosions!

  • if I know carbon nanotubes avoid the light to get inside and multi-walls permit to keep inside the heat and convert the electricity in parallel tunnel.so thus can make hydrogen to react to single atom to even more single weak reaction between the muon and neutrino.but just i said is theory how cold the catalyze can react.so is much more freaking fantasy.so I m not a expert technical chemical in this fields.but Alberto Rossi , he only a business man not a technical,he is like Jean-Claude Mas..

  • My toaster gets a lot hotter a lot faster than this thing and it doesn't even require hydrogen or water!

    Gee, wouldn't this have been SO much better if all the electrical inputs were simply disconnected? Who cares what the meters are reading, since we have no idea how they are connected?

    I predict that one day we'll find out why this contraption is all wrapped up in foil.

  • @Astrobrant2 It's wrapped in foil so that Big Brother doesn't read it's thoughts! LOL

  • if any carbon nanotubes inside....?

  • @GeneralMarian2010 what does carbon nanotubes has to do with this?

  • .be/heTzvy2ALRo

  • looks like a fake and aint producing no more steam than tankless hot water heater. 47 lilograms of water per hour? thats the rate but what was the volume over time in ss mode? bet he dont want to pinochio it yet....it will blow his delusion that this box is a nuclear reactor. it is not. the results are not a secret. this is hot water heated by electric elements and stored. ( best heat storage is salts molten with water) in vacuums. no temp drop in 18 hours.

  • A petition to ask the White House to purchase and test an E-Cat can be signed by going here: wh dot gov/j3P

  • petition for the e cat. go to free energy news dot com

  • i bought a tankless water heater from ebay that draws 50 amps. thats at 220 volts and thats 11kwatts. so i could put that in that hokie thing and run my mouth about temps all day. for that matter run my mouth about all the tech crap and still this does not mean that some #4 wires and a tankless water heater aint in the box. they are about the size of a carton of cigarettes. or maybe he solved the worlds energy problems. which is true. if he did then i guess all the arab countries will be totally

  • 2.5Kw input??Seems it is a electric stove!

  • VERY NICE....?????

    LOOKS LIKE THEY START TO UNDERSTAND THE STANLEY MEYERS HEAT / STEAM RESONATOR...????? WE ALL READY POST A VIDEO ON OUR CHANNEL THEWATERENERGY1..!!!!! HEAT STEAM RESONATER..!!! COOL...

  • @THEWATERENERGY1 REALY NICE WORK.....?????

    AT LEAST HE CAN SHOW THE HAET ELEMENTS .....?????

    BUT HE IS NOT DOING THAT ...!!!

    SO HE STILL HVE TO PROOF IT....!!!!

  • @THEWATERENERGY1 CHECK THIS VIDEO STANLEY MEYER EXPLAIN IT ALL READY IN 1992....(Stan in switzerland_6.avi ) THERE IS A LOT MORE VIDEOS HERE AT ( StanleyMeyerVideos CHANNEL ) FOR THOSE WHO"s LIKE TO UNDERSTAND WHAT ROSSI IS DOING..!!!

  • i want to buy one don't care if doesn't obey the laws of physics who cares .as long as it works and it can run all my heaters in my house for free than im up for it.

  • wouldn't it be nice if this con-artist was for real. No more living on the grid, ohh well back to the solar panels.

  • myself i believe this man and think this technology is amazing and could dramatically change the world we live to a better place with no more wars for energy supremercy

  • the fossil fuel men will py people to discredit theis tech and say to the world that mr rossi is a scammer it has happened before all new technology that changes the current status quo is dangerous for some who are into making money and profit and are not interested in solving the energy crisis

  • the fossil fuel men will not go quietly into the night.

  • If this is a genuine fusion reaction, it should self-sustain as long as reaction temperature is maintained or exceeded. I would like to see the output driving a load eg, steam engine at greater than atmospheric pressure, It should be possible to measure decrease in mass of reactants, using e=mc2 to determine energy produced.

  • Rossi is a bull-shitter.

  • @dreamdiction why so

  • @gatheringoftheminds Watch from10:25 in this video /watch?v=15Ea92OViZw

    Rossi is a liar because he has a past record of being condemned by the Magistrates of Lecco, Monza, Milan and Turin. Rossi created a media event to persuade people he could do magic to create oil. Rossi took peoples money but he didn't produce a single drop of oil. Now he is running another scam with cold fusion which he will not allow anyone to test properly and which has never produced any electricity. Rossi = fantasist.

  • @dreamdiction Did you not just watch the October 6 megawatt demonstration. It was on self sustain mode for 3 hours boiling water.  Look at pure energy systems' articles on it.

  • (1) @gatheringoftheminds The Oct 6 test was another 'Rossi show' with no temp measurement on the cooling water flowing down the drain and no closed loop to measure and condense output steam back into the original volume of water. Retired Professor Focardi is a pointless wallflower who doesn't know Rossi's secret ingredient and the 1 MW machine is also pointless because it's merely 52 Fat-Cats joined together when there still has not been a definitive test of one single FatCat (27kw).

  • @dreamdiction Time will tell, but what is your explanation of what is happening in this video.

  • @gatheringoftheminds asks me . . . "what is your explanation of what is happening in this video."

    The venting steam shown 7 minutes into this video is the only evidence of the calorific over-unity claimed by Rossi. My comment numbered (3) already explains the venting steam.

  • @dreamdiction And all the others. It has endorsements from people much more qualified than you, no offense.

  • (2) @gatheringoftheminds A hand feeling the rumbling of boiling water is ridiculous. If the Fat-Cat can develop 15kw over unity then Rossi should bring six 45/50 gallon drums into the room, fill them all with water and use a closed loop system to raise the temperature of the 300 gallons from room temp up to 99 degC in 2 hours.

  • @dreamdiction I consider all the points you make are valid. If the E-cat would really work, he could do a lot of tests, to prove to all skeptics out there that the energy claimed is generated. I wonder how long this sharade will last before it will be proven it's not working. However, I find hard to understand the reasons for his actions. Is he unable to correctly measure the energy generated? See Wikipedia - Electricity from waste heat.

  • @nick1f Thank you for your Wikipedia Reference. I'm sorry to say that Andrea Rossi's behaviour is very suspicious. In his most recent test on the 28th of October he claimed to have produced 470kva (470watts) (>600hp) BUT throughout the test there was a 450kva Diesel Genset (generator) running. Rossi's motivation is simply that he enjoys making himself the focus of public attention and he will continue with his tricks so he can surround himself with the attention which he loves.

  • @dreamdiction That Genset footprint also fits their 600KW unit. I really hoped the e-cat was real.

  • @dreamdiction I was not clear with the wikipedia reference. Check wikipedia on Andrea Rossi (entrpreneur) and the paragraph about electricity from waste heat. In the past, he claimed a very high conversion rate from waste heat to electricity. The interesting thing is that he believed back then in producing these thermoelectric generators and his results were positive. An independent evaluation revealed much worse figures. I expect the same with the e-cats, if he'll accept a 3-rd party check.

  • @nick1f Someone has made a funny cartoon like a 1970s video game about Rossi. See the video link below

    /watch?v=N3PmDeMHiuw

  • (3) @gatheringoftheminds . The Fat-Cat continued to generate heat for 3 hours after electrical disconnection, but Rossi stopped the test because he was tired. Again this is ridiculous. If this Nickel/Hydrogen cold fusion is true then everyone involved would be happy to take turns sleeping on the floor so the test could continue for weeks. The steam venting at 7 min is normal for water which is 130 degC under pressure and you reduce pressure which makes the water erupt as reserve steam.

  • (4) @gatheringoftheminds .Rossi continues to avoid genuine undisputable calometric proof so he should be considered a fraud. Everything about this Rossi Saga is exactly what you would expect in a fraud, including the ridiculous “Journal of Nuclear Science” which is merely Rossi’s blog. Some people are actually saying they are not buying their winter heating oil because they hope to have their own Nuclear Fusion home heating in time for winter. Industrial 1 MW units available by Nov = fantasy.

  • Invention of the millennium

  • Looks like more smoke and mirrors to me...

  • Still not producing any electricity yet?

  • It appears that the water pump was shut off for the self sustain mode; it cannot be heard at the 6:00 mark in the video. Was there any steam being released during the self sustain mode?

    This seams like the exact same results you would get from a large well insulated pressure cooker. Why is there no scientific calorimetry to prove this device. It looks like it could be just more deception.

  • @lead2feather I agree with your observation. It's not a coincidence, Rossi has always evaded to allow a proper stationary calorimetric test, because such objective measurements would debunk his steaming dog-and-pony show.

  • @SH0LVA of course, he refuses to do some tests because he is a liar

  • @EnkyNakamura I think, Rossi, the engineer with a bought title is on a good way to zip by the famous scam-artist Sean McCarthy (inventor of Steorn-Orbo® and founder of the orboistic religion).

  • @EnkyNakamura how can you be so sure?

  • @lead2feather absolutely agree on that. Another pointer in that direction is that at 5:55 the „steam temperature“ is 133,5°, while half an hour later it dropped to 121,9°.

    The whole thing doesn't look like science to me. Calorimetry would be a trivial and obvious thing to do here to find out how much energy is available. Opening a water hose creates a lot of smoke, yet doesn't proof much.

  • @lead2feather ..Ha..yes, I think so..I believe they're just measuring the heat generated by the incoming power, heating the 'heavy' water...this is the 3-4th guys in 25+ years claiming cold fusion, all have the heavy insulation, and non-repeatable measurements...but...I could be wrong...

Loading...
Alert icon
0 / 00Unsaved Playlist Return to active list
    1. Your queue is empty. Add videos to your queue using this button:
      or sign in to load a different list.
    Loading...Loading...Saving...
    • Clear all videos from this list
    • Learn more