2002 Camaro SS Ms4 Cam idle clip x-pipe single chamber flows

[chevellenut1968]

what mufflers did u have

[zombieman82091]

God, I could imagine that trying to make it a half block down one of our streets here in PA!!LOL! So many potholes and shitty roads here, that exhaust would be in pieces all over the shit roads we have. Beauty though!

[slow02ss]

@zombieman82091 thanks! we are lucky to have really good roads down here. I know how Pa is, my in-law's are from Pittsburgh, visited there a couple of years ago, and the roads were pretty bad.

[1HOTLS1]

sounded nice!



[iKushhh]

bet you wont sell it.

[slow02ss]

@iKushhh yeah...did over a year and a half ago

[Syrius187]

@slow02ss why'd you sell it?

[wowofallthepeople]

@slow02ss if you dont mind me asking, what do you drive now?

[slow02ss]

@wowofallthepeople a ranger, and an R1

[slow02ss]

@wowofallthepeople a ranger, and an R1

[slow02ss]

@wowofallthepeople a ranger, and an R1

[paintballalstar]

hey whats the lsa of that i know you can pick a couple different lsa

[slow02ss]

@paintballalstar

that was on a 111 lsa

[jdew657]

badass car badass sound but i would hate to take that over a speed bump

[slow02ss]

@jdew657

thanks! i actually never hung it on speed bumps

[bustalip810]

i came here to hear the monsterous motor rev, not to hear it just on

[slow02ss]

@bustalip810 well the title does say "idle clip"........ it was for people who is looking to know what the idle characteristics of the ms4 is. I have neighbors, i don't just go outside and rev my motor up. sorry. watch my other vids at the drag strip if you want to hear it rev.

[zombieman82091]

Awesome sound man, that look is badass too. I got rid of my 2000 SS because of my 2nd son, I wish I could put him back and get my Camaro back..LOL! just kidden. Someday, somehow, I will own one again, and I want it to look and sound just like yours bro. Perfect Camaro!

[956speedLT1]

do you have a balance tube?

[slow02ss]

@956speedLT1 x-pipe



[956speedLT1]

@slow02ss

d@mn it hits a lik hard for having an x-pipe is it one with 110 lsa?

[slow02ss]

@956speedLT1 111 lsa



[CAllMeACAMPER]

having a camaro all blacked out is what i want

[124maddog1]

Do you still have this car?

[slow02ss]

@124maddog1

unfortunately no....

[giovannysg]

sounds beastly!!!!!!!!!

congrats bro

[Argedis]

I like the HD camera video quality, looks like you're running a little rich

[DANIAC262]

Georgia tags!

[porkchop869]

what kind of exhaust are you running? Xpipe threw what mufflers?

[luisbcruz]

georgia muscle nigga!!!!!

[Caman355]

Where, and how much was the 12 bolt? Ive been looking and no one seems to want to give pricing info unless you call. I just want a ball park figure, posi unit of course.

[slow02ss]

@Caman355

i give 2g's for it used. New with everything it had would have been around 27-2800.

[jtep071189]

@Caman355 dude its a waste of money when u can just weld the 10 bolt together n it holds just as much power

[Caman355]

@jtep071189 - Ive read that if you run 4.10s in the 10 bolt they sheer off because the teeth are so thin because of how small the gear is. Ive been really thinking about building a built 10 bolt that was welded and maybe just doing 3.73s, but Im not sure if theres a big enough difference between 3.42 and 3.73 to be worth it. The car is never going to see the track, and very rarely may see a roll race. Just wanna make sure its gonna be strong enough for ~450whp.

[jtep071189]

@Caman355 oh deff dont waste the money to get a 12 bolt if ur just gunna put 3.73s in it will hold it fine welded..... n yes u can most deff feel the change its very nice haha except if u not doing track y put 373s in leave it b n u got a ta or camaro?

[ShamusOGrady2]

Can i get this downloaded to my ipod?

[Fredy2k5]

Old skool look...

[motozach]

i reallly wanna get my dodge ram 1500 cammed, but i dont know what id need or how much itd cost, could you give me some advice

[slow02ss]

@motozach

i have no idea what to tell you. you will have to upgrade pushrods, springs and retainers. and you need supporting mods, but far as price, have no idea what it would cost to do a dodge.

[nickyjam770]

@motozach go to a dodge forum...

[ericg83z]

@motozach probably expensive man dependin on if its one cam or 4 cam engine (DOHC) plus pushrods , rockers , springs , retainers, torque converter , computer tuning , less to wanna go the cheaper route and go with a mild cam nothin crazy, let me know id like be updated about that my buddy wants his done

[JDMxGSRxVTEC]

why would you sell such a beauty

[rmf09020]

ms4 can is the best sounding in my opinion

[triplet85]

where in Ga are you?

[TransAm5667]

those borla xs mufflers? i have the xr1's on mine i love them

[slow02ss]

@TransAm5667

those are single chamber flow's. I have sold the car, but it does have xr-1's on it now, its what the new owner put on it. It is now in texas. thanks for the comment!

[xTXOuTLawZx01SS]

@slow02ss Hey where in Texas is it??? i'd like to race it with my 01 SS

[slow02ss]

@xTXOuTLawZx01SS

can't remember, south east part i believe.

[GroundZ28ero]

im lovin the true duels

[shawnmgarcia]

Shit, I love the exhaust setup

[stvnslls]

type of exhuats?

[XxXNyMpHoXxX]

Nice.

[assmunch50]

where do u get those tinted rear light covers at?

[slow02ss]

they are not covers, its ppg clear coat with some black paint mixed in.

[CarsClub]

is it good for daily driving ?

great car

[slow02ss]

@CarsClub

it can be daily driven, but i have a dd so i don't.

[chiarellasteve]

mmm thats a nice maro, i just kinda wish it was doing a burnout throughout this video

[jizzo2009]

heads? sounds good

[slow02ss]

@jizzo2009

thanks, its stock ls6 heads. Probably going to a new home saturday... unfortunately due to the times i got to get rid of it.

[jizzo2009]

dude forreal? how much? fuck man that really sucks...selling it as is?

[slow02ss]

18k, should be going to IL saturday to its new owner.

[jizzo2009]

I'm sorry to hear. Luck will turn around. Did you do the work yourself?

[slow02ss]

i did everything but the tuning. Vengeance racing did the tuning.

[jizzo2009]

what advice would you give on flycutting the pistons? I've got a good idea on how to...just not all that confident in doing it yet

[slow02ss]

never done it, didn't have to do it with the ms4 on stock decked heads. I do know you will need a junk head for doing it.

[impalassd5ane]

GOOD SAUND ^_%

[slow02ss]

lol, it only looks like that sitting in the driveway, can't figure that one out

[Schalk3]

Haha. The ol Chevy Lean. Mine does that too