Installing Lifters, Pushrods & Roller Rockers

[KreatorOfDeath1985]

Can i Re use Lifters?

and do those rockers require tall valve covers, AND all these should fit on a Vortec engine correct? Vortec heads rather thanks alot!!!

[1973novaboy]

Nice video man, everyone makes it seems easy. I'm having a hard time with this

[346ls6camd]

screw those asshole talking shit watch it and shut the fuck up nice vid man i just wanted to know if you have to leave the hyd lifters pump up some oil over night in a pan or bucket of flooding them with oil? even new ones correct? thanks man nice vid....

[thtsjon4u]

finally a simple video to explain this... thanks this helped a lot. Its pretty much what i expected, but nice to have someone else confirm my thoughts on how to do this. Although id like to do this with the air manifold and dist back in place where i marked it, once i get the new lifters in there...there should be enough rod left to wiggle around to check tightness right under the rockers.

[erickmiller1990]

man this was a great video, sorry about the ignorant commentts people come up with, your lucky to have ur dad there even if hes only holding the camera. thanks for the video.

[lioookm]

@erickmiller1990 bitch u are the ignorant person. u cant spell comment dumb ass bitch. he is lucky to have his dad considering ur dad left u when u were 10 after fucking u in the ass

[erickmiller1990]

@lioookm lol this is on my phone, XD and no my dad died a few weeks back, and o.0 ur such a tough internet guy. ur prolly some bored pedafile creepin round the internet with nothing better to do, smh. lol it takes allkinds to make the world, have a good day little man.

[gunforme]

I don't get the negative comments about the camera man. I thought it was held pretty steady compared to a lot of videos I've seen. The picture quality is clear, I can hear everything being said. What more can you ask for? I think some of the negativity is just from some people who don't fully understand this themselves and are venting frustration for their lack of ability to grasp how it all works.

[lioookm]

@gunforme how what all works u fucking dumb ass, what the fuck are talking about, go find ur fat ass mom and fuck her

[gunforme]

@lioookm If your going to curse and insult someone, at least use proper grammar. You have no place calling anyone a dumb ass if you don't know how to capitalize the first word of a sentence and end it with a period. As for the mother statement, it doesn't warrant a reply. It's the typical one liner I expect from internet tough guys.

[lioookm]

@gunforme Listen here smartass. What do faggots like you come on here of all places and try to be teachers? this is not the place bitch. Like I said before, find your fat ass mother and fuck her in her ass. How is that for proper grammar?

[FlorianGeyerUK]

@lioookm Hello again troll!

[lioookm]

@FlorianGeyerUK what the fuck is wrong with u? u are a fucking utube stalker. go suck ur dads dick, may be that will give u something to do broke bitch

[gunforme]

@lioookm Once again you have failed to use proper grammar. That leads me to believe you did not finish school either. Also I haven't attempt to "teach" anyone on youtube, however, unlike you I think youtube can be a good place to put up instruction videos. If you disagree why come on here? Also, what is it with all the comments to me and everyone else about fucking relatives, screwing them in the ass, and blowjobs. You are one twisted individual and seem to have a fetish.

[lioookm]

@gunforme hey bitch is that the best you can do " wewe he didnt use a capital letter to start a sentence" "he didnt put a period at the end of a sentence" "he used the letter U in place of the word you" Bitch this is utube not english class u fucking dick head, by the way u forget to add ed to attempt u fucking dumb ass bitch, so suck ur dads dick and then kill urself

[gunforme]

@lioookm There you go again with the incest talk. If that is your kind of thing that is your business, but all your doing is airing your dirty laundry. You keep acting like a tough guy but your only making yourself look really stupid. I've read a lot of your comments and it seems everywhere you go, you are hated by the majority. But I know you love the drama because you life sucks so bad you have to come on youtube and talk about incest to have any excitment in your life.

[lioookm]

@gunforme damn bitch you are still beating this dead horse i thought i was done ripping u a new asshole bitch, you must love the attention, you say my life sucks you are the fucking loser posting dumb ass comments on a saturday night while im out enjoying pretty women and friends u dumb ass muthafucka, now STOP with the dumb ass comments bitch get a fucking life bitch, a fuck ur significant other, man or women, do something dumb ass muthafucka

[gunforme]

@lioookm Nah, you just want the last word but you aren't going to get it. I don't mind keeping this going. The more I keep you replying, the more ignorant you prove yourself to be. The difference is I am not the one focused on the homo comments, incest, foul language, etc. Also you weren't out with any pretty women. Anyone that talks about homosexuality and incest as much as you could never get a real woman.

[lioookm]

@gunforme the last word, what are you fucking 8 years old, wtf, u can have the last word u fucking loser, wow u really need to get a fucking life, is utube the most iteresting thing in ur life at this time, u r a fucking waste, go get some pussy for petes sake, i do have a beautiful fiancee bitch, u have more than proved that u are a lonely piece of shit u fucking loser, just end it, kill urself please, being the loser that u are u will continue to respond u fucking faggot

[gunforme]

@lioookm Unlike you I can justify my time on the internet. I work with computers and spend a lot of time on the internet. How about you? Why are you always on? Let me guess, a poor dumb unemployed redneck with nothing better to do than sit back talking shit and living off Uncle Sam. It's funny though, your first post was hostile toward my first comment which wasn't even negative toward anyone but a simple observation that most of the bad comments are a result of lack of understanding.

[1jdmcrx1989]

Good video keep it up man

[JasonToTheCollins]

I am only 16 and I am rebuilding my 350 myself your video was very helpful thanks a lot man.

[seapeddler]

A good pushrod chucked in a drill press can be used to pump up the lifter.

Place the lifter in a metal can full of clean oil. The drill press lever action expels tiny air bubbles which will stay in the lifter and cause tickage. Synthetic oil is bad for forming air bubbles in hyd. lifters. Alas, Lucas oil stabilizer can be used with conventional or synthetic oils to prevent air bubbles from forming.

With Lucas, lifters bleed down less overnight. Engine pre-lubers prevent start-up noise.

[TheHughes606]

Can you post a video on how to remove a broken push rod?? I have no clue and I want to try to do this my self...Its for a 2003 Kia Sedona or am I getting in to something that is way complex??? Any help would be great thanks!

[grshimer]

When doinh this adjustment should I follow the firing order?

Ie do cyl #1i then#1x then move to #8 and do the dame?

[My1968Impala]

Guideplates are a MUST with roller rockers, isn't that right?

[rancheatinsob]

@My1968Impala unless they're self aligning. In a sense yes, because i stay the hell away self aligning rr's.

[DAHKIDD760]

very well explaing camera guy in the other hand is a fuken noob

[MrHaystack510]

I like how diz dude explained how to install it but the damn camera guy is a dumbass

[JohnQuickUSF]

@MrHaystack510 Hey bro. I'm glad you found my video helpful. My dad is not technology saavy however. He was the camera man. I dont really appreciate you calling him a dumbass. Thanks.

[lioookm]

@JohnQuickUSF sorry guy but the camera man is a dumb ass, a real fucking douche bag, great commentary

[JohnQuickUSF]

@lioookm I hope this was helpful. But, please know that it was my father holding the camera, he's old school, and doesnt know how to use electronics real well. So, no, he's not a 'fucking douche bag'.

[paladineXD]

You guys know anyone good in the miami area in florida to install my springs and rockers?

[ifabbott]

A lot of good tips there, thanks for taking the time to post.

[jasonneal]

i like your video, but you camera man shouldn't drink any red bulls, can't see what your doing, camera is all over the place

[crime943]

nice finger

[Screammy89]

lol it skipped the part i wanted to see. installng push rods. on a ford 4.6 i believe i have a bad one. its knocking like crazy. and how hard is it to remove lifters?

[JohnQuickUSF]

@Screammy89 Not too hard. Depending on the position of the camshaft some will protrude out of the bore and can grabbed with fingers (if a lifter lobe is bad, it may get stuck). Try using a pair of needle-nosed pliers to get the harder ones. As far as pushrods they just pull right out once you remove the rocker arm. Roll these on a flat surface to see if they are bent or not.

[Wicked03GT]

@Screammy89 Ford 4.6L does not have push rods. THe Ford 4.6L engine is a modular engine with over head camshafts. If you have a loud knock, its probably the #7 rod bearing as those are very well known for going bad.

[JohnQuickUSF]

Thanks for all the comments. I am glad this video was helpful.

[Whatthefuckisgoingon]

nice video man im about to start rebuildin one and this one part i was wonderin how it was done

[bedazzzled]

Nice video man

[scotttufts]

thanks