Warmoth Guitar Project #2 Part 2

[MrFrothinger]

Trem-oh-lo?  WTF?

[back2thefutre]

what

[HolyGfunnies]

reduces the molecular structure huh? you should be a scientist

[DaniJahn99]

are wilkinson humbukers etc... good??

because my guitar has them but i dont know if its soo good

[Aliksmyth]

TremOlo.

[fisttofaceband]

so high

[padawan007]

im building a kramer replica with ash tree does it worth to build it with ash or better mahagony with maple top i prefer ash what are the differences i mean is it a problem to build it with ash or better mahagony

[Guy9998]

@padawan007 If you're building a Kramer replica and aren't sure what wood to use, I'd probably go with the wood that Kramer uses on whichever model you are replicating. In my experience with the mahogany/maple combo as opposed to ash, ash tends to sound brighter whereas mahogany/maple sounds warmer and darker. I've only ever had ash on a single coil Strats and Teles and mahogany on Les Pauls with humbuckers though. I tend to favor swamp ash wood. It's prettier too. 

[SamWycombe]

WTH is with sodder??! I could swear it's called solder.....with an L...... :s

[doveign]

@SamWycombe it is solder but it's pronounced "sodder" haha

[MoJoe1983]

@SamWycombe In America, it's pronounced "SAH-dur," and in England, "SOLE-dur." The English tend to pronounce things very phonetically. Another common difference is the world "filet." In America, we'd say "fill-AY," whereas in Britain, "FILL it."

[xXshalowXx]

put a floyr sorse on that bittch

[SteveTheJazzMan]

I will NEVER use locking tuners ,

just something about em

[zutstrikeback]

Hi i have a fender body and an allparts neck and i want to fit them together but there is a small gap between the neck and part of the neck pocket, it is about 4 or 5 pieces of paper thick. and i was wondering how i could fill this gap i'm just scared that this will kill the resonance of the whole guitar. thanks

[DeanMLFlame]

you can try Quick Wood...it's like a putty that you mix with a little water and when i sets up it becomes almost exactly like wood so it's sandable

[scottarino1]

If you wanna build a strat, buy the Dan Earliwine "how to build an electric guitar" video from Stew Mac. It comes with full size plans for a'62 strat. Easy as pie.

[312time]

savage lookin guitar

[sebm89]

Maaan u seem like the nices guy in the world, real life, summer of love happy.!

Cool videos!

[dbenc]

crack kills

[TeamXTREMEPANTERA]

@dbenc he should change his name from snouter to snorter

[JasontheGuitargod]

@TeamXTREMEPANTERA lol, snorter probably his name, but hes snorted to much cocaine to know it.

[NewOrleansTours]

★★★★★

[alexking090]

if you dont mind could you give me an estimate of how much that project cost

[northlander30]

well I am about to build a Strat and I bought a Fender body and neck not Warmoth and everything else to go with the body (football type jack,strap buttons, pre wired pickgaurd, replacement bridge and neck pickup,push pull coil tap,Wilkinson bridge,neck plate,trem cover plate,Gotoh mechanical locking tuners,nut,string trees,pick guard and trem plate screws. It all came to about just over 500 Canadian and that didn't include sandpaper , fillers ,other tools and colour. AN additional 100 for that.

[childrenofbodomfan74]

4:52 xD

[eakinj]

Awesome, I didn't take any photos of my warmoth when i built it, maybe when i do my firebird i'll have to do a video of the process. sweet guitar man! makes me think about doing a strat

[shineon1967]

clever idea putting the bridge studs in the freezer for awhile first

[Ekis86]

Beautiful guitar man. Only thing is i dont like the color of the neck :P im gonne get one a these.

[rw9495]

Nice floor. Looks like velvet.

[jezuse]

your floor sounds kinda hollow...

[PanteraMan717]

i have one i was bored today so i painted mine jet blue and put a floyd on it

[b1gje55e]

i love your eccentricity dude

[MarcBolan3]

also, if you dont have a tuning fork, you can just use any peice of metal,even a ball point pen, and just tap the pole peices on the pickup, that will make a noise through an amp :)

using a screwdriver is handy, as you most probably have one on hand from adjusting the pickup height etc :)

[TeleMaster72]

how much did this guitar cost exactly i really like it and i think i`ll buy the same one

[dirtydeeds73]

its not a specific model, its a bunch of parts bought off of warmoth(.)com. im looking forward to doing this sometime when i can get the friggin money

[donwon213]

Get the Rock and Roll going!!!

[Jst0911]

you sound like Norm from "this old house"

[Jasoniscool1]

very good, but with soldering to the claw: rough the spot up where you want to solder with some fine grit sandpaper and the ground wire should solder very easily to it. I cant tell where you have soldered the ground to the screw but you may have some problems later on when setting up the bridge.

[quadsimo]

these videos are great, i crack up every time you say Tre-Molo

But youtube would be worse of without guys like you. I am going to be doing a project and posting up in bits how it goes with a demo at the end :) I will send you link when its done.

[bumxr]

hey man send me a link too will yu

[quadsimo]

click my username and subcribe thanks.. even snouter subcribes :)

[glmetal]

do you think wilkinson tremolos ar better than fenders, schallers or floyds????(i know that floyds stay better in tune, but with machine heads like the sperzels the problem could be resolved...)

[dime9876]

the problem wouldn't be entirely resolved due to the friction of the nut. floyds stay in tune because they eliminatefriction between the nut (or the tuners) and the bridge.

[CMAN732]

You just have to lubricate the guitar nut and a fender tremolo will stay in tune ver yvery very well you can shave a pencil tip with a file and put the sahvings in the nut and the tremolo will stay in tune very well

the problem with floyds is they suck all of the tone out of your guitar

[dustypuppy]

awesome - interesting - informative - thanks man

[enjoythevoyage]

Hello! I am #200 subscriber, reporting in for duty! This is an absolutely fascinating video & I LOVE to learn new things! I love all types of music, & think that I have agood ear! Congratulations on making it to 200 and beyond!5 musical stars!

[vela07]

Thanks dude, that was some good info man!

Have fun with that guit and Rock oN!

[Soulpin]

What type of the fretboard is that? Pao Ferro?

[Hans47]

snouter, about how much does a guitar like this one cost? Ouch, I winced every time you rapped that t-fork.

[Hans47]

That much? Hmm, very interesting.

[Hans47]

Oh really? Wow, that is very interesting.

[Hans47]

Well, in that case I would like to place an order for three of these guitars. Thanks!

[Hans47]

ok, i received the guitars in pieces but you forgot to send instructions. Please send. Thank you.

[Hans47]

Dude, I received the instruction yesterday, Very detailed but only one problem: you sent me the instructions in Japanese. Please send English version. Thank you.

[Hans47]

OK, after waiting 10 months, I give up. I have connected with another company, Eden Maze. Their customer service is so much better. They answer questions and are courteous.

[ontrashakotra]

That's great to have a 3-pickup Warmoth in addition to your bridge humbucker screamer. I'd love to sink a few hundred in some Warmoth parts.