can the micro cessna 210 bind with my blade MCX controller in stock form? i understand that in stock form it wont bind to the dx6, but is the blade MCX Tx differnt?
Using the vapor/ember board for this mod makes perfect sense, because the aileron (right stick for mode 2) will be the input for the rudder, like it is on all 3ch models. However, you also said that using an AR6400 could also work. Wouldn't that result in having to use the left stick for rudder and throttle, and right for elevator? The inputs wouldn't be the same as the vapor/ember board.
Really? I thought that perhaps only the ESC would have been too small. Probably not worth the conversion if I need to buy separate servos, receiver and ESC!
will a dx5e bind to my ar6400?
Tlsowa4 5 months ago
@Tlsowa4 Yes it will
HorizonRCdotCom 5 months ago
so i can connect my dx7 to my ember2
webkinzandrew 1 year ago
@webkinzandrew Yes you can
HorizonRCdotCom 1 year ago
nice job Gary, never would have thought to do this.
jsmbc101 1 year ago
can the micro cessna 210 bind with my blade MCX controller in stock form? i understand that in stock form it wont bind to the dx6, but is the blade MCX Tx differnt?
999benhonda 1 year ago
@999benhonda No, it cannot.
HorizonRCdotCom 1 year ago
I wish you would have shown the binding process. That would have been a time saver .
mdivinc 2 years ago
We have a number of binding videos here on the site. It was something that, due to the time constraints, wasn't possible to show in-depth.
HorizonRCdotCom 2 years ago
Using the vapor/ember board for this mod makes perfect sense, because the aileron (right stick for mode 2) will be the input for the rudder, like it is on all 3ch models. However, you also said that using an AR6400 could also work. Wouldn't that result in having to use the left stick for rudder and throttle, and right for elevator? The inputs wouldn't be the same as the vapor/ember board.
Admiral1428 2 years ago
Nice!All i have to do is buy the plane now...
Like the edge540 more...
miklosko3355 2 years ago
I will go ahead and..
sorry ;)
kangsterizer 2 years ago
Can we assume this process can also be performed on a Mini Super Cub?
KaldekBoch 2 years ago
No as the electronics in the Mini-Super Cub are significantly different. You can make this mod but you'll need different components to do so.
HorizonRCdotCom 2 years ago
Really? I thought that perhaps only the ESC would have been too small. Probably not worth the conversion if I need to buy separate servos, receiver and ESC!
KaldekBoch 2 years ago
5***** good vid
happyturtle18 2 years ago
I just ordered a citabria from u guys!!
SpartanDara117 2 years ago
Planes and cars on 1 radio??? You drive with a DX6i?
stphndxtr 2 years ago
No, I want all my planes one radio and all my cars on another. For my surface vehicles 9-times out of 10 I use the DX3R. Otherwise I use my DX3S.
HorizonRCdotCom 2 years ago
I cant afford a DX3R, so I use my DX6i to control my cars and boat. Its kinda bad how I dont have a reverse though... but I did program a brake.
CyclingMagician 2 years ago
parkzone should make a cessna 210 centurion 2 and citabria 2 both with larger mah and dsm2 technologies
jeflatt 2 years ago 8
This has been flagged as spam show
@jeflatt I guarantee you they are trying.
dunkmaster1992 1 year ago
great tutorial! it was really helpful!
horizonflyer9 2 years ago
Very nice,5*
startazz 2 years ago