Hyper TX 3: How to install the fans with the clips provided.

[djkarcel]

Thank you very much for this video !!! But I still want to kill the motherfucker who designed this freaking clips...

[Romulo282838]

Thank You Very Much! And Merry Christmas!

[PhluXx1]

Thanks a million you really helped me out and you were the only helpful video I could find for this. The instruction manual sucked... :(

[chopgr]

@PhluXx1 I second that!

Cheers dood!

[justcallmealfie]

Thanks for that. Had the clips the wrong way round....doh!

[anhtuan1t]

How well does this perform over AMD stock cooler???

[vBDKv]

@anhtuan1t On my 3ghz quad core it's idling at 30-33c and full load 41-44c. It's odd that it only increases by 11c tops but that's what its telling me after an hour of prime95.

[azsumbe]

Thanks for the video mate, it was really helpful:) These are the most lame clips I've ever seen.

And no, this cooler is weak for overclocking Phenoms, for stock yes, for overclock look at Hyper 212+.

KlemzeTV 2500k is waaay cooler than Phenom, you can't compare them.

[azsumbe]

Thanks for the video mate, it was really helpful:) These are the most lame clips I've ever seen.

And no, this cooler is weak for overclocking Phenoms, for stock yes, for overclock look at Hyper 212+.

KlemzeTV 2500k is waaay cooler than Phenom, you can't compare them.

[DeeJaySiddall]

can anyone help i have the TX2 2 pins have come off upto now i have put them back since now im scared ill fry my cpu FML is there a certain position i should put it ? fan facing in a certain direction ?

[rokz991]

omg, thx for vid , realy need it !:)

[XDennisDmeniceX]

I HAVE A HEATING PROBLEM!!!! can i buy this cooler to cool my amd phenom ii x3 720 cpu @ 2.8 ghz ? because with stock cooling i hit over 60 degrees when playing games

[KlemzeTV]

@XDennisDmeniceX did you apply the heatsink correctly? Im at 21 in idle and 35 at load with 2500k at 3.3 ghz, and at 4.3 ghz im at 30 idle and 49 at load.

[freego56]

HELP ME PLEASE!! i wanna buy this cooler, but i wanna use it in a AM3+ motherboard... is it compatible? and i wanna use it to overclock an AMD Phenom II x3 720 BE... if it compatible, do you have any videos how to change the bracket to AM3+ socket?

[XDennisDmeniceX]

@freego56 it is compatible with your cpu even the x6 amd cpu are compatible with this cooler but i just wanted to know how much difference will this make than the stock cooling?

[ccrraazzyyftw]

oh my god thank you! i've been cursing like never before when the absolutley worthless piece of shift manual didnt show how to install the clips properly.

They should include a usbdrive/cd with videoinstructions damnit.

[CasperHansen]

@ccrraazzyyftw Indeed, I ended up using super glue to hold the damn thing together.. Christ this system is BAAD!

[deadly1010P]

is this good for alittle overclocking not max?

[ooBounceDKoo]

Totally needed this video. I had no idea how to install the fan lol

[ChipoltleXD]

Very helpful. Thanks for posting this.

[Super4Cod]

I don't believe this, it's 1 damn hour i'm trying to put the damn fan on the cooler :(

[Sucharda]

@Super4Cod Same for me :D I discovered, that i am doing it wrong...Pay attention to 0:50

[Super4Cod]

@Sucharda Yeah Exactly ! Jesus i'm so glad i made it :D

[shadow1910]

Is the 92mm fan 3-pin or 4-pin connector? =)

[dragata1]

@shadow1910 3 pin u can get a daul 3 pin fan splitter for 7 bucks if u want to run 2 fans on it

[revitt1234]

cheers, i was staring at the stupid clips for about 10 mins wondering how they fit! (was putting them on the wrong way round) oops

[cammz3]

Could always secure the fan with a bit of blutack on the rubber pads if all else fails with these things.

[Ubojica6661]

Can that cooler hold overclocked 1 core processor at less than 30 degrees celsius?

[titansram66]

@Ubojica6661 i got a quadcore overclocked 3.2ghz running 36-38 degrees

[KuwaSai]

If I use Noctua NT-H1 thermal paste with this cooler will it perform better than the paste that come with the cooler?

[TensonFlo]

@KuwaSai

Why you should buy paste that costs nearly as much as the cooler?

[KuwaSai]

@TensonFlo it's $8 in my country, and can be used ~20 times. The TX3 is about $30.

[BDKsoft]

Love this cooler! Small (compared to 120m fans/heatsinks), cools very well and it's really cheap. Beats the living crap out of a stock cooler no doubt about it.

[martinpsychocowboy]

thx for this vid...as said @Maarek753951 ... i was totally frustrated too of that crappy system of montage...

[KovarD]

@martinpsychocowboy Same here. I don't feel that the fan is secure there.

[Maarek753951]

Thank you very much. I was totally frustrated :)

[xOrangeShot]

I have lost the extra clips that came with the cooler. So what can i do now to install a second fan w/o the clips? Anywhere i can buy the clips?

[yuriperiotto]

hello, can i put another of the black cooler on the other side? will it help to keep my computer cooler ? wots the size that i need to buy ? and how do i se it up? jut put it upside down ?

[drakex99]

yes, size the same as the other one, you set it up the same way you did for the other one but facing opposite side, and make sure your mb have enough space to set up the second cooler because some mb the cooler wont fit because some components gets in the way, everything should be done without using force.

[yuriperiotto]

@drakex99 thanks man, now i need to find where to buy another one (5") and if there space to connect both coolers both sides at the same time =D

[CDMCCDMC]

@yuriperiotto you need another 92mm fan

i use Zalman ZM-F2 PLUS 92mm its almost the same as original

[milutinndv]

Аве Аве Аве !!! Пријатељу пуно,пуно пуно пуно пуно ти хлава!!!! Ја сам СОМИНА и нисам знао да наместим ово срање од вентилатора са оним кур..

Ave,ave,ave!!!!Friend,thank you verry verry verry verry verry much.I am an idiot who doesnt know to install wires to the shit.

Greetings from Republic of Serbia people !!!!

[chee006]

i use two clips on each side since I was afraid to poke the damn rubber

[D081]

lol crodon :-x

[momoseport]

I have it too

[cammo2066]

thanks for the clear,. good instructions. The main problem was the clips which is too hard to read from the manual.

[Crodon]

I also tore off the rubbers because I just couldnt do it... Well sucks for my costumer but it's done.

[Crodon]

I've built over a thousand computers, loads with Schyte Mugen's.

This system baffled me its totally fucking useless.

[egovir321]

worse fan system ever made :S

[Crazy831811]

lol thanks...i just bought one..cant get the pin right..keep falling down...thanks a lot...

[Sylverlyf]

Thank you! I was about to throw the thing!

[maxnanabas09]

push pin suckss!!

[mxt4life]

What is a fan that you can buy for this heatsink?

[kschwarz88]

You can pretty much use any 92mm case fan for the second fan. Although, most case fans are 3 pin non-PWM so that means that fan will run full throtle unless you have a fan controller or mod the fan to run slower.