VSC is vertical stock class. That means the air source goes into the VA, so if using a 12 gram changer itll be like having a foregrip, or u can run a constant air co2 tank like a 3.5 oz. RSC is the same setup,except its a right feed SC instead of the regular stock class feed.
My phantom in this video was a WEVO, 45 VSC with 14" freak kit, WEVO UC Kit, Dye stickies,CCI trigger shoe, CCI ghost ring. Now its the same besides a 1 of 1 CCM 86 frame on it, and milled freak back.
hey im gonna get rsc phantom but i was wondering if i should get a t stock and if i could use a coil for it i would use a 45 degree part tho so the coil doesnt get in the was of the stock
to run a remote youd have to put a quick disconnect fitting onto the valve body. Unless you got a lapco air thru t-stock or something that has the fitting on it to run a remote.
depends on how u want to play. stock class u only get 10-15 balls. open class u have a whole hopper. On the phantom in this vid i have stock. but also a centerfeed body for it. My new phantom i have a centerfeed body with a ego feedneck machined directly to the body.
thanks :) Im using a 600 dollar JVC Everio HDD 34X optical zoom. 30 GB. Has economy, normal, fine, ultra fine. This was taken in fine quality. Amazing how little distortion and what not there is.
no. I was shooting diablo nightmare, that was from a event in feb. that was 20 deg. out. so the paint was horrible, phantom shot it no prob. :) that is after it went through the cold, and sitting in a box outta the bags in my room for like a month and a half
upon rethinking about how far it is, id say roughly 21 yds. my accuracy drops as i start to shoot faster, but heck by then i wasnt goin for accuracy just speed.
phantoms suck :(
treenut22 1 year ago
@treenut22 fuck dude, dont watch it if you dont like phantoms
techpbrockks19 1 year ago
I NEED MONEY TO BUY ONE OF THOSE
maxkenney2 3 years ago 2
What are you shooting at??
ECWTNAWWE33 3 years ago
a 6 wheeler that i originally was going to turn into a tank
supergoat06 3 years ago
and just out of curiosity what are you shooting
congratsxihatexu 3 years ago
VSC is vertical stock class. That means the air source goes into the VA, so if using a 12 gram changer itll be like having a foregrip, or u can run a constant air co2 tank like a 3.5 oz. RSC is the same setup,except its a right feed SC instead of the regular stock class feed.
My phantom in this video was a WEVO, 45 VSC with 14" freak kit, WEVO UC Kit, Dye stickies,CCI trigger shoe, CCI ghost ring. Now its the same besides a 1 of 1 CCM 86 frame on it, and milled freak back.
supergoat06 3 years ago
that helped and what is a cci
congratsxihatexu 3 years ago
cci is the company that makes the phantom, and some select phantom parts.
supergoat06 3 years ago
how do you mount sights on phantoms liek i seen them on top of the feedtube but what is it connected to
congratsxihatexu 3 years ago
theres a dovetail milled into the plastic on the feedtube.
supergoat06 3 years ago
thank you srry for all the questions last one what are you shooting at
congratsxihatexu 3 years ago
a old 6 wheeler that i originally was going to make a infantry vehicle out of.. but decided not too.
supergoat06 3 years ago
@supergoat06 how much do u want 4 the 6 wheeler
icebreaker123456 1 year ago
whats the difference between cci vsc rsc phantoms which one is good for someone like me who is just starting to play pump
congratsxihatexu 3 years ago
hey im gonna get rsc phantom but i was wondering if i should get a t stock and if i could use a coil for it i would use a 45 degree part tho so the coil doesnt get in the was of the stock
paintballmoreyo 3 years ago
to run a remote youd have to put a quick disconnect fitting onto the valve body. Unless you got a lapco air thru t-stock or something that has the fitting on it to run a remote.
supergoat06 3 years ago
should i get a stock class or the hopper one
elksfball5 3 years ago
depends on how u want to play. stock class u only get 10-15 balls. open class u have a whole hopper. On the phantom in this vid i have stock. but also a centerfeed body for it. My new phantom i have a centerfeed body with a ego feedneck machined directly to the body.
supergoat06 3 years ago
ya thanks alot :) and btw does a sight help?
elksfball5 3 years ago
for some it does.
supergoat06 3 years ago
i'm loven ur camera. usaully youtube does crap 2 my videos when i upload them
windex1122 4 years ago
thanks :) Im using a 600 dollar JVC Everio HDD 34X optical zoom. 30 GB. Has economy, normal, fine, ultra fine. This was taken in fine quality. Amazing how little distortion and what not there is.
supergoat06 4 years ago
nice splats and nice camera!
questionful 4 years ago
People say marbs are the best paint for Phantoms.
mallard417 4 years ago
ur shooting to fast. you're gonna lose accurasy
FruityChewy6 4 years ago
marbs are .688 which fits the stock barrel pretty well. then again almost all paint is accurate shooting with the stock barrel.
supergoat06 4 years ago
have u shoot marbs i ordered my phantom and hoping marbs fit the barrel and etc thanks
EvilEasties 4 years ago
r u shooting marbs
EvilEasties 4 years ago
no. I was shooting diablo nightmare, that was from a event in feb. that was 20 deg. out. so the paint was horrible, phantom shot it no prob. :) that is after it went through the cold, and sitting in a box outta the bags in my room for like a month and a half
supergoat06 4 years ago
upon rethinking about how far it is, id say roughly 21 yds. my accuracy drops as i start to shoot faster, but heck by then i wasnt goin for accuracy just speed.
supergoat06 4 years ago
How far away were you?
hughjunit 4 years ago