I dont get why people would want multiple shots per second, why not just leave it at one shot per interval and have 9 intervals to get 9 images? thats all you need for good HDR. Even for time lapse, why have more than one image per shot? what will it do if you have 4 images per shot every 5 seconds.so in 20 seconds you have 16 images. are those images each different if you are taking images of a moving object? i hope im not confusing u
@timetoparty11 As it turns out, if you have auto-bracketing enabled while using interval shooting the camera will shoot all the brackets back-to-back. For each interval. So it's kind of a mute point because the camera will do it anyways. If the subject is far away and moving the quicker you shoot your bracket the better. The more you spread it out the more likely something in the scene will change significantly.
@bastian74 I see. Makes sense. However, question still remains, if I am taking pictures of a flower or something close and still, why have 5 pictures per interval, why not just 1 per 1? This goes along with time lapse I guess. Do you have an email I can maybe get in contact with you ?
@timetoparty11 You need multiple shots to create a HDR image (high dynamic range) where each of the group of shots is at a different exposure. If you do not have exposure bracketing turned on the interval shooting will only shoot 1 shot per interval. To take an HDR you want all 9 exposures to be the exact same alignment. That is hard to do holding the camera by hand! And Nikon does not tell you how to take 9 exposures without holding the bracketing button by hand. This is how.
Many thanks for this upload - most appreciated - it's always easier to watch how someone else does something than spend an hour ploughing through the manual :-)
Ah! I see. You have to hold down BOTH the assigned preview button AND the shutter release. Also, if you do not set shutter to single ( I typically leave it in CL) then you will start a new 9-shot bracket immediately after the previous one is done.
I wonder if intervelometer will do that too...? That would be useful for doing animated HDR! ;-)
I can't get the d300 to rapid fire like you do with the press of the preview button. ie the last two minutes of instruction. I even set bracketing to flash only and closed the flash, as you hinted at. Any ideas what I've do e wrong?
Finally a youtube video by someone who knows what they are talking about, without any long boring slow intorducitons. GREAT VIDEO with EXCELLENT READABLE SCREEN CAPTURES.
If you take a bracketing photo "normally" (not using the timer as in this video) you set the camera to Single shot mode and then hold the shutter down while holding down the bracketing burst button you've programmed.
thank you bestian. I have a D5000 and when i try to enable the option of "Interval timer shooting" it says that "this option is not available in current settings". would you have some idea what 'current settings' are restricting me from enabling this option. thankx!
thank you bestian. I have a D5000 and when i try to enable the option of "Interval timer shooting" it says that "this option is not available in current settings". would you have some idea what 'current settings' are restricting me from enabling this option. thankx!
@mianarsh I don't have that camera, but check that you are using single shot mode, and not continious focus mode. It's possible that it doesn't allow you to do that with autobracketing.
Thanks a lot! I found this video to be very useful. The manual is not helpful when it comes to try figuring out how to do this. Ignore the criticsm of the moron who obviously does not know how to use the pause button, you did a great job on this and I am going to have a look at your other movies. Again, thanks a lot!
Thanks a lot! I found this video to be very useful. The manual is not helpful when it comes to try figuring out how to do this. Ignore the criticsm of the moron who obviously does not know how to use the pause button, you did a great job on this and I am going to have a look at your other movies. Again, thanks a lot!
@junkmail0005 I wasn't expecting many views when I made it, and recorded it ad-lib. I plan on paying more attention to detail in future videos. If you let me know which errors stand out I can add an anotation correction.
thank you for this helpful tutorial. I tried the manual earlier, and other camera guide books ( like DAVID BUSCH's ) but could not figure out exposure bracketing settings. You tutorial made it so easy to understand and implement. thank you again.
Can you set the bracketing to take 3 pictures that are more than one stop apart, or are you limited to one stop. Meaning if you wanted more than one stop apart, you would have to take more than 3 pictures?
@flippenmh In order to get more than 1 stop apart, yes you'd have to take more than 3. Take 5 at 1 stop apart and use every other photo. But I'm not too sure 3 photos at 2 stops apart each would be all that great for hdr. Kinda removes the whole purpose of hdr and the detail the combined images provide.
You guys must not be familiar with all of the menus on your cameras then, because I understood everything he said and knew where he was within each menu (even though he was fast about getting there), just fine.
good info but the thing is, you go through the menus way too quickly and someone can't glance at the menu and do the same thing on their camera at the same time because the quick seconds they look away, you are already 2 menu options ahead and I missed it.
Constantly replaying it trying to find what you are doing.
I did not rehearse, and I'm not an instructor, so my videos tend to run long. There is a 10 minute limit on the videos so I wanted to squeeze it in. Feel free to pause/rewind.
thank you bastian74 now perhaps i can do a good D200 Photomatrix combo for once haha have you got any vids on HDR m8? il have a look im being lazzy ;)
How can I set my bracketing on the D300 to +-2 exposure increments? It seems the largest it gets is +-1. I have +-2 on my D70. Hope you can help. Thanx
+/- 1 is as large as you can go, but you can use up to 9 steps which gives you a range of -4 to +4 stops. The D70 can only give you +2 to -2 stops (3 steps)
Thanks for that explination. I would have to say that isn't an optimal way is to just adjust shutter speed. This is to only make sure the DOF is not adjusted
Great video and tip for doing non motion blur HDR shots. It's always hard to get it set up, wait, adjust shutter speed and do it again.
Make sure everyone knows, at the end you were saying they were at different f-stops. It's not about adjust f-stop (aperture) its about adjusting the shutter speed
HDR is not about short exposure to long exposure, it's about under-exposure to over-exposure and there's a few ways to accomplish that. ISO, Shutter, Apeture
I love HDR photography and am purchasing a D300 just for that purpose but when I asked the people at Ritz Camera about these settings, they were clueless. So glad I found this video how-to so I can try to figure it out on my own. Thanks!
its sort of funny how complected it is with the D300... It's so quick and easy on the D200! Check out my HDR timelapse using this technique... ;-) peas.
You can overlay images, but not for the effect you want. HDR images have to be combined post-production. Check out Photomatrix. "The trial is fully functional and never expires..."
Interesting. On the other side I noticed you can also "bottom out" at 1/8000 shutter. In either of these situations it sounds like you're stuck using either the timer, or a remote relese, or a laptop with Nikon Camera Contro Pro 2.
I discovered two bad behaviors of the D300 related to the BKT function that occur when shooting at night with high f stops.
1. If turn on the noise reduction for long exposures it messes up the BKT series and resets it, althought it is not finished completely.
2. Exposures are not done correctly when reaching an EV that causes shutterspeed longer than 30s. Say you need 30s to produce a EV of +2 the following exposures e.g +3, +4 are also done with 30s.
I have a question: What were you using to take the bracketing series? If you use long exposure noise reduction ensure that the bracketing shots allow enough time for double the maximum exposure duration.
That is, if your longest exposure in the series is 20 seconds, the camera will be tied up for an additional 20 seconds to take the dark image. So you would want to set your time lapse mode to take ONE picture every 25 seconds, for as many iterations as your bracketing mode is set to.
1. time lapse mode with plenty of images to make sure every exposure will be triggered
2. Continous H Mode with a locked remote shutter release.
Both time the bracketing series was reseted when reaching a exposure that causes "Job NR" (> 7s I guess). That makes it impossible to use the bracketing funktion together with NR for longtime exposures when shooting in the dark.
That's lame. Maybe they'll fix it some time. In the mean time there is the old fashioned way: take another series of the bracketing pictures (at the same exposures) with the lens cap on and use photoshop to "subtract" the dark frames.
Can the D300 not do automatic long-exposure noise-reduction? My Canon does that automatically. It takes 2 pictures, one with the shutter open, and then another with the shutter closed. It then subtracts the noise of the second from the first, no Photoshop needed.
THANK YOU! Oh, how I hate slogging through that stupid manual! Aaaaaaaaaaaaargh! You're fabulous!
lashelsophia 1 week ago
man lovely features.. I wish canon had that...
TheoO18 1 month ago
Very well explained. Thank you.
JarettMuttsPhotog 3 months ago
Excellent tute! I couldn't get this information more clearly out of the instruction book or other searches online. Very well done! Thank you, Sir.
writeDVD 5 months ago 2
Thanks for a great video. Didn't know my camera supported that.
epacke 7 months ago
Thanks for a great video. Didn't know my camera supported that.
epacke 7 months ago
I dont get why people would want multiple shots per second, why not just leave it at one shot per interval and have 9 intervals to get 9 images? thats all you need for good HDR. Even for time lapse, why have more than one image per shot? what will it do if you have 4 images per shot every 5 seconds.so in 20 seconds you have 16 images. are those images each different if you are taking images of a moving object? i hope im not confusing u
timetoparty11 8 months ago
@timetoparty11 As it turns out, if you have auto-bracketing enabled while using interval shooting the camera will shoot all the brackets back-to-back. For each interval. So it's kind of a mute point because the camera will do it anyways. If the subject is far away and moving the quicker you shoot your bracket the better. The more you spread it out the more likely something in the scene will change significantly.
bastian74 8 months ago
@bastian74 I see. Makes sense. However, question still remains, if I am taking pictures of a flower or something close and still, why have 5 pictures per interval, why not just 1 per 1? This goes along with time lapse I guess. Do you have an email I can maybe get in contact with you ?
timetoparty11 8 months ago
@timetoparty11 You need multiple shots to create a HDR image (high dynamic range) where each of the group of shots is at a different exposure. If you do not have exposure bracketing turned on the interval shooting will only shoot 1 shot per interval. To take an HDR you want all 9 exposures to be the exact same alignment. That is hard to do holding the camera by hand! And Nikon does not tell you how to take 9 exposures without holding the bracketing button by hand. This is how.
bastian74 8 months ago
Many thanks for this upload - most appreciated - it's always easier to watch how someone else does something than spend an hour ploughing through the manual :-)
spacemagick 8 months ago
@spacemagick :) Especially if you've left your manual on another continent! DOH!
lashelsophia 1 week ago
@lashelsophia Yeah, I hate it when that happens :-o
spacemagick 1 week ago
Wonderful job -- exactly the info I was looking for, explained clearly and concisely. Ignore the naysayers.
ZimFromIrk 11 months ago
Ah! I see. You have to hold down BOTH the assigned preview button AND the shutter release. Also, if you do not set shutter to single ( I typically leave it in CL) then you will start a new 9-shot bracket immediately after the previous one is done.
I wonder if intervelometer will do that too...? That would be useful for doing animated HDR! ;-)
ckeilah 1 year ago
I can't get the d300 to rapid fire like you do with the press of the preview button. ie the last two minutes of instruction. I even set bracketing to flash only and closed the flash, as you hinted at. Any ideas what I've do e wrong?
ckeilah 1 year ago
Finally a youtube video by someone who knows what they are talking about, without any long boring slow intorducitons. GREAT VIDEO with EXCELLENT READABLE SCREEN CAPTURES.
mgondek 1 year ago
If you take a bracketing photo "normally" (not using the timer as in this video) you set the camera to Single shot mode and then hold the shutter down while holding down the bracketing burst button you've programmed.
bastian74 1 year ago
in bracketing burst mode did you have to hold the did you hold the release button continuosly or did you click once and the camera did the rest?!
sylviaguardiam 1 year ago
Very cool. Love auto bracketing for HDR stuff.
LEXPIX 1 year ago
to bad my D60 don't have that :(
but thanks for video :)
TheVeetle 1 year ago
Thanks so much - just set my D200 up and I am loving it !!!
arlenenorton 1 year ago
Thank you very much - just set up my D200 and finally it's easy to bracket !!!
arlenenorton 1 year ago
This has been flagged as spam show
thank you bestian. I have a D5000 and when i try to enable the option of "Interval timer shooting" it says that "this option is not available in current settings". would you have some idea what 'current settings' are restricting me from enabling this option. thankx!
mianarsh 1 year ago
thank you bestian. I have a D5000 and when i try to enable the option of "Interval timer shooting" it says that "this option is not available in current settings". would you have some idea what 'current settings' are restricting me from enabling this option. thankx!
mianarsh 1 year ago
@mianarsh I don't have that camera, but check that you are using single shot mode, and not continious focus mode. It's possible that it doesn't allow you to do that with autobracketing.
bastian74 1 year ago
Thanks for the info, I've always been curious about it, but never needed the mode until lately. Misplaced my manual so this is great. Thanks.
DaneUni 1 year ago
Thank You.
tilakhettige 1 year ago
Thanks a lot! I found this video to be very useful. The manual is not helpful when it comes to try figuring out how to do this. Ignore the criticsm of the moron who obviously does not know how to use the pause button, you did a great job on this and I am going to have a look at your other movies. Again, thanks a lot!
lfranga 1 year ago
Thanks a lot! I found this video to be very useful. The manual is not helpful when it comes to try figuring out how to do this. Ignore the criticsm of the moron who obviously does not know how to use the pause button, you did a great job on this and I am going to have a look at your other movies. Again, thanks a lot!
lfranga 1 year ago
Great tip!
Thank you.
MalaikaToo 1 year ago
This guy's should do some research before posting videos. He is very misleading with lots of errors.
junkmail0005 1 year ago
@junkmail0005 I wasn't expecting many views when I made it, and recorded it ad-lib. I plan on paying more attention to detail in future videos. If you let me know which errors stand out I can add an anotation correction.
bastian74 1 year ago
the nikon d5000 doenst let me take the pictures by intervals with AEB on =S that sucked
katingaman 1 year ago
thank you for this helpful tutorial. I tried the manual earlier, and other camera guide books ( like DAVID BUSCH's ) but could not figure out exposure bracketing settings. You tutorial made it so easy to understand and implement. thank you again.
Takanawwa 1 year ago
People who are complaining about the tutorial being too fast - You can pause the tutorial on your computer. Why not try that?
XL2man 1 year ago
Can you set the bracketing to take 3 pictures that are more than one stop apart, or are you limited to one stop. Meaning if you wanted more than one stop apart, you would have to take more than 3 pictures?
flippenmh 1 year ago
1 stop is the max step size supported by the camera.
bastian74 1 year ago
@flippenmh In order to get more than 1 stop apart, yes you'd have to take more than 3. Take 5 at 1 stop apart and use every other photo. But I'm not too sure 3 photos at 2 stops apart each would be all that great for hdr. Kinda removes the whole purpose of hdr and the detail the combined images provide.
Garredom 1 year ago
This has been flagged as spam show
The narration and rapid menu navigation make it really difficult to follow.
EdJessops 1 year ago
It might be important to mention that taking of Auto ISO is a good idea for HDR
dolman69 2 years ago
Thanks a ton!! - I just bought a D700, and your tutoral was a great help. Works perfectly!!
XL2man 2 years ago
You guys must not be familiar with all of the menus on your cameras then, because I understood everything he said and knew where he was within each menu (even though he was fast about getting there), just fine.
Eckz2k4 2 years ago 2
The narration and rapid menu navigation (without any cogent explanation) is so difficult to follow that this piece is nearly impossible to follow.
lmtfi 2 years ago
Hey thanks a lot! The mystery of HDR photography on the D300 has been cleared up. Keep up the good work.
irkulyen 2 years ago
good info but the thing is, you go through the menus way too quickly and someone can't glance at the menu and do the same thing on their camera at the same time because the quick seconds they look away, you are already 2 menu options ahead and I missed it.
Constantly replaying it trying to find what you are doing.
rct4905 2 years ago
thats why you have a pause button.
lukeschillin 2 years ago 6
I did not rehearse, and I'm not an instructor, so my videos tend to run long. There is a 10 minute limit on the videos so I wanted to squeeze it in. Feel free to pause/rewind.
bastian74 2 years ago 3
awesome video .. that last part is exactly what I need.. and the other part is perfect when I use a tripod! Nice work and thanks!
HolidayNova 2 years ago
thank you bastian74 now perhaps i can do a good D200 Photomatrix combo for once haha have you got any vids on HDR m8? il have a look im being lazzy ;)
beerequalsheaven 2 years ago
thanks a lot pal .
almegalli 2 years ago
fantastic... you are the Best!!!
mmatamorosj 2 years ago
Hello Bastian. Many thanks for that. I have D700 and reading manual just does'nt go into enough detail explaining how to asign the Fn button.
Really helpful.
Thanks, Mactools80
mactools80 2 years ago
my interval timer shooting is grayed out, i cant select it in the shooting menu. any idea why this is?
sheogad 2 years ago
How can I set my bracketing on the D300 to +-2 exposure increments? It seems the largest it gets is +-1. I have +-2 on my D70. Hope you can help. Thanx
bluedawn45 2 years ago
+/- 1 is as large as you can go, but you can use up to 9 steps which gives you a range of -4 to +4 stops. The D70 can only give you +2 to -2 stops (3 steps)
bastian74 2 years ago
Thanks for that explination. I would have to say that isn't an optimal way is to just adjust shutter speed. This is to only make sure the DOF is not adjusted
iflynething 2 years ago
Great video and tip for doing non motion blur HDR shots. It's always hard to get it set up, wait, adjust shutter speed and do it again.
Make sure everyone knows, at the end you were saying they were at different f-stops. It's not about adjust f-stop (aperture) its about adjusting the shutter speed
iflynething 2 years ago
Actually it depends on the camera setting. Set to A it adjusts the apeture, S it adjusts the Shutter and P it actually adjusts them both
bastian74 2 years ago
HDR is not about short exposure to long exposure, it's about under-exposure to over-exposure and there's a few ways to accomplish that. ISO, Shutter, Apeture
bastian74 2 years ago
Thanks ... you've helped me out a lot with this vid ....
funniq 3 years ago
Great video! I didn't have a clue on how to do HDR with my camera and now I'm popping out those HDR's like clockwork. Thanks a million!
Lindahumphries 3 years ago
thanks for a great tutorial
Kaneblind 3 years ago
Can you buy a canon and demonstrate this for me :)
morgansmom03 3 years ago
I love HDR photography and am purchasing a D300 just for that purpose but when I asked the people at Ritz Camera about these settings, they were clueless. So glad I found this video how-to so I can try to figure it out on my own. Thanks!
ssmcintire 3 years ago
its sort of funny how complected it is with the D300... It's so quick and easy on the D200! Check out my HDR timelapse using this technique... ;-) peas.
milapse 3 years ago
Hi, Can you combine this with camera HDR?
hutdockz 3 years ago
You can overlay images, but not for the effect you want. HDR images have to be combined post-production. Check out Photomatrix. "The trial is fully functional and never expires..."
bastian74 3 years ago
Interesting. On the other side I noticed you can also "bottom out" at 1/8000 shutter. In either of these situations it sounds like you're stuck using either the timer, or a remote relese, or a laptop with Nikon Camera Contro Pro 2.
bastian74 3 years ago
Very good explaination.
I discovered two bad behaviors of the D300 related to the BKT function that occur when shooting at night with high f stops.
1. If turn on the noise reduction for long exposures it messes up the BKT series and resets it, althought it is not finished completely.
2. Exposures are not done correctly when reaching an EV that causes shutterspeed longer than 30s. Say you need 30s to produce a EV of +2 the following exposures e.g +3, +4 are also done with 30s.
flerli 3 years ago
I have a question: What were you using to take the bracketing series? If you use long exposure noise reduction ensure that the bracketing shots allow enough time for double the maximum exposure duration.
That is, if your longest exposure in the series is 20 seconds, the camera will be tied up for an additional 20 seconds to take the dark image. So you would want to set your time lapse mode to take ONE picture every 25 seconds, for as many iterations as your bracketing mode is set to.
bastian74 3 years ago
I tried both:
1. time lapse mode with plenty of images to make sure every exposure will be triggered
2. Continous H Mode with a locked remote shutter release.
Both time the bracketing series was reseted when reaching a exposure that causes "Job NR" (> 7s I guess). That makes it impossible to use the bracketing funktion together with NR for longtime exposures when shooting in the dark.
flerli 3 years ago
That's lame. Maybe they'll fix it some time. In the mean time there is the old fashioned way: take another series of the bracketing pictures (at the same exposures) with the lens cap on and use photoshop to "subtract" the dark frames.
bastian74 3 years ago
Can the D300 not do automatic long-exposure noise-reduction? My Canon does that automatically. It takes 2 pictures, one with the shutter open, and then another with the shutter closed. It then subtracts the noise of the second from the first, no Photoshop needed.
devin6687 3 years ago
It does it automatically, but it breaks the hands-free bracketing sequence if the noise reduction job is too long.
bastian74 3 years ago