Added: 2 years ago
From: INVENTOR3
Views: 37,832
Sort by time | Sort by thread (beta)

Link to this comment:

Share to:
see all

All Comments (67)

Sign In or Sign Up now to post a comment!
  • cool, thanks for sharing :)

  • Man, that would make a great antenna for my crystal sets/shortwave/AM radios, etc...I'm jealous (live in an apartment)

  • @sparkdetect some do it in their apartments. running antena out the window to side of building or from their cieling down to their floor on long angle. where there is a will, there is a way :-)

  • @INVENTOR3 I do have a 30 ft. indoor antenna, it's surprisingly good for boosting shortwave reception, and is useful for crystal sets if used with a ground.

  • @sparkdetect Ohh, very interesting :-)

  • Good day Pole! Tell me pls, how you hooked up the coil? where you have connected to the ends of the coil? How many turns of the coil. Thank you. Sorry for my bad English

  • @anderwill1972 I would sugest to watch "free energy from air HOW TO, part 1" to part 3

    coil is placed between the antenna and the circuit. I dont remember the dimentions exactly, so i would watch the videos :-)

  • @INVENTOR3 I have duplicated your circuit. In general, I was able to take 70 mV of voltage and 6 mA for amperage on the closure of (+ -). I can not understand how you got more than 1 volt. A mystery!

  • @anderwill1972 you got good current. i get between 20 &40V,,but then i add coil between antenna and circuit and get over 100V. My power lines run under ground here.

    I can help more if you send me video or photos of your set-up,,,,, millanyangle at yahoo dot com

  • @INVENTOR3 really Volts? or mVolts? hm.... i have only 20 mV to 70 mV.... :( bad

  • @anderwill1972 Full Volts. I can get over 100V, but little current.

  • @INVENTOR3 There is a suspicion that next to your house (the radius of 8 kilometers) is a high-voltage power lines or radio repeaters.

  • incorporate an automotive ignition coil instead

  • how much power our you makeing

  • @alienhddna Only like 50 microwatts,,not much. Most voltage in video 16.

  • what abaut the coil? is it just to make the wire anthena longer? is it possible to charge phone with circut like this?

  • @anesthetized8 The coils made the voltage go from like 60 or 80 volts up to 124V, with very little loss of current. The thing was having the ground going through the coils, that made the big differance. No luck with charging a phone yet,,,but im working on it :-)

  • way to go.. you guys are useing your head and hearts well..

    but dont you know.. you not supposed to stray out of the box? werre supposed to think and do only what tV AND MEDIA TELLS US TOO.. :D (WINK)

  • Are any of your videos worthwhile to watch AT ALL? Most of them are you droning on about useless bullshit. 10 minutes of attention whoring.

  • @SideWinderGX Vid 7 shows incoming frequency. Vid 16 shows 125V, also powering a calculator. Im working on this project now. In next few days i will know weather or not i can charge a battery, and power many devises from it,,,,,Please subscribe,,,new videos coming soon i hope(if i get good results).

  • @SideWinderGX ur a dickhead dont watch the fuckn video tight ass lookn for free energy then bitchen stfu already

  • @dismemberedANDmolese Hurr durr, internet toughguy. Once you graduate elementary school come back and maybe you'll understand you shouldn't jump into other peoples' conversations with your worthless advice, douchebag.

  • @SideWinderGX ya like ima keep this conversation /going if whe get int o a fight there will be to hits me hittn you and kid rocks bawidaba playin in the background just stating if ur gonna call the guy a DRONI

    NG talk bout bullshit then y u watchn im on 8 xanie bars and bored whats ur excuse savn 5 bucks hahahaha ur now ignored

  • @dismemberedANDmolese Well you made it easy for me... I don't have to insult your intelligence any further because anyone reading your comment will realize how retarded you really are. Thanks for that, much appreciated.

    INVENTOR3: Didn't see your reply, honestly. I'll check out vid 7 and 16, sounds like some interesting results.

  • part 1: I wish i knew all the stuff you know :(. i have charged a battery with only one wire ever hooked up from the negative of my water fuel cell to the negative of my battery, also charged two AA batteries with one wire to the negative and a non magnetic ss spike in the ground, takes a couple of days and can not be done twice in a row for some reason,

  • @1liveandlearn11 cant be done twice in a row,hmmm interesting,,,maybe try adding a solar charge controller.

  • part 2: but i was also able to say charge to water can be regained before science knowledge it recently, i also predicted hole doping would aid in superconductivity, people said i was crazy until science acknowledged that as well, i also predicted thunder was not from air expansion before it was discovered in a lab, thunder will one day be known as an implosion of electrons being added back to ions,

  • @1liveandlearn11 hole doping, does help coductivity. Your a thinker, i like that,,,good theory about the thunder, thanks.

  • part 3: thus the rain falls back down once again bloated with its electrons. Where i fail is at coils and circuits and such :(, sorry to ramble but i wanted to give you a bit of background on y work before i ask you a question, do you think it is possible that electrical generating systems are continually feed with electrons, not a closed loop as we are taught, after all there is an ion field inside generators,

  • @1liveandlearn11 do you think it is possible that electrical generating systems are continually feed with electrons, "Not a Closed Loop" as we are taught,. Absolutely correct!!! yes , this is what i believe,,,,i think the magnet is continualy exchangeing particals with space, maybe transforming them,,then these particals are being transformed onto the wire(conductor). Think about it,,where do the electrons keep coming from in a generator,,,,there is no deterioration of the wires.

  • part 4: to have an ion field you have to be adding or removing electrons, since there is no available electrons it must be a positive ion field, lacking electrons, so that should tell is that those electrons ejected from the high spin state may be being added to the coils, i wanted to ask and mention this because it may help you with your work if my hypothesis is correct.

  • @1liveandlearn11 Good point, thanks.

  • @INVENTOR3 B part 2: I consider stress to atoms ejects electrons and the magnetism increases this stress. If you ever want to try my free battery charging experiment let me know i will give you more details, also if you ever want to try water fuel cell work i can help.

    Cheers.

  • @INVENTOR3 B part 1: Yes and electrons can also be both a particle or a wave so it is not that far fetched they can be escaping the system. I just read about hot electrons the other night and they are known to tunnel out of objects,like wires perhaps? This leads me to another hypothesis that heat is nothing but electrons in a higher vibrational frequency.

  • @1liveandlearn11 Hot electrons, hmmm, higher vibrational state,, this makes sence.

    Dr Moray's circuit ran cool,,,when he lit a bulb, only a very small spot on the tip of the bulb the size of a dime was only warm.

  • @INVENTOR3 C part 2: i believe they are just lost in the form of heat. So because no charge was ever added in the form of positive and negative this can only be electrons, this also cracks the water into an ion possible plasma energy. This is how the joe cell works. Here is a link to some of my battery experimental work. thorgoluckyDOTcom/forum/viewto­pic.php?t=7985&start=0

  • @INVENTOR3 C part 1: Cool, Also science just recently acknowledged water can store a charge and that charge can be regained (Can Water Store Charge?

    Kate Ovchinnikova and Gerald H. Pollack) Regaining some charge with one wire ever hooked up to the negative on a battery from my cell leads me to believe it could only be electrons, of course some electrons will stay in the loop,

  • @1liveandlearn11

    The earth is hollow and the centre is electrons. Thats also the Aurora Borealis. these electrons coming out of each end of the planet BUT some escape through the surface too maybe.

  • @OneManARSNL lol are you messing with me?

  • @1liveandlearn11 Not at all dude. You will never know either. They will not tell you, and you wont know even if you tried to go there...you would not make it. I'm not messing at all.

  • @OneManARSNL This is the free energy. Yes, it can be harnessed. Simply too.

  • @OneManARSNL but what leads you to beleave it is full of electrons? electrons ushaly nutralize ions unlus there is more elctrons than ions, stress to atoms releases electrons.

  • have you tried putting your coil near the top of your antenna if you get more voltage just by picking it up maybe you'll get more if it was closer to the top of the pole

  • @coffeeking36 many people ask this....but it did not work. I get better results with it at the bottom.

    Hmmmmm

  • your voltage readings. are they A/C or D/C ??

  • @draknon2 DC,,,,sorry so long for a reply,,,i fell behind on responding to people.

  • @draknon2 is that a rock group?? a/c d/c??

  • I would suggest that you buy a good oscilloscope. Your meters don't really tell you what the signals look like - input or output. Once you have a handle on the frequencies and the wave forms, you can begin to look for the source.

  • @RightQuiteNot Thanks,,got one from e-bay just last week :-) also got a nice frequency gen,,,i like new toys, hehehe

  • Put an oscilloscope on your output voltage and post the results. How close are you to broadcast TV towers?

  • @RightQuiteNot nearest towe is about 8 miles away. I did check the incoming frequency on just the antenna, and it was like 265Hz, not sure exactly without looking back at the video again. I show it on later videos. but it is over power line frequency and below radio frequency.

  • Entertaining, great for powering up a transistor radio, but for real power I suggest a windmill with battery backup. We as a country are asked to mass manufacture them. I say we do it. We can the tie into the grid and use regular generation of energy as a standby for high consumption times.

  • @hempster1956 Thanks for the comment. Yes, i agree, wind energy is a very good thing, but i hope to discover a "new" form of energy.

  • It would be very interesting to attach a thin 30 to 60 gauge hollow metal ball (basket ball sized) (copper-tin-aluminum) to the top of the antenna...with the rod insulated up into the hoolow ball 1/3 of the way. The theory is the "Ether" collects inside the sphere and jumps the gap to your attenna rod...giving you "Bursts" of energy to your collector circuit and then to ground.

  • I like this, it is interesting. I thought you were just going to say add a sphere, but to add with the gap is very interesting.

    I will think about this one, thanks.

  • hehe..  lightning rod..

  • 30 SECONDS LOL.

  • The amperage is important, can tenr 200000 volts but 2 amperes, this way it(he,she) does not serve similar energy...

  • Yes, need more Amps.

  • I think Ill try a dipole antenna with coax cable and grounded shield - and line it up with the magnetic fields of the earth- like a compass needle- worth a try??? Maybe?

  • Yes, try.

    I have worked with this cable....i had no good results, and other have tried with no good results,,,maybe it would require a differant circuit.

    I have a way to treat the cables to increase their effect....but their effect is mainly picking up static electricity.....but we are collecting energy though another means, not through static.

    Yes, i tried conecting inside of cable and outside of cable and both....not nearly as good of results as the wire.

    But always experiment, never know!

  • someone tried strips of teflon tape hanging from antenna wire, said it helped.

    i tried it and got little results,,,but i had a bad set-up at that time....maybe this would be good easy thing to try.

  • PROBLEMS POSTING COMMENTS

  • Your in minnesota. The Radio gave it away.

  • mm so what is the amps if you don't mind? haha we never got to that part.....taking about expected movie sequels..Very intriguing stuff great work

  • Good question.

    about .2 milli Amps.

    add small coil between antenna and circuit, than about .1 milliAmps.

    I will post more comments.......

  • more commens on video part 5

  • Is the wire from the tesla coil insulated like a generator's magnetic coil? the small coil hookup to your antena that is, dang with expensive carbon and magnesium rod I just get 2 volts! congrats great work your tesla coils are pretty neat

  • Yes, insulated, 20 gauge magnet wire.032, double dipped(they call it) so with coating it is either .0324 or .0344...i forget exactly, after wire is wound on coil, than i coat also with layer of varnish or laqure.

    Thanks for compliments. about 2 weeks and i begine work on Tesla Coils again.

  • Keep up the good work! Hey could you tell me where I can get a frequency chart like the one you have?

  • i love this chart..more detailed than any other.

    phone 1-800-digi-key(free call)

    let them know you want a catalog and would like to get a free frequency chart.

    along with my catalog they sent me a return postcard for free chart.

  • Thanks for the info!

  • LOL...Live long and prosper...

    Hey I heard a menards ad, so your in michigan?? Im up in Sault Ste. Marie, Ontario.

    You look to be on the right track, the non conductive pole was the right way to go, but man does it wip around!!  Have you thought about different materials for your ground rod, Zinc perhaps?? You can get rolls of Zinc in the roofing isle its meant to prevent moss from growing.

  • glad you like the video.

    thank god for menards. Ahhhh mynards...(my nards)...get it...hehehehe.

    Hmm, zinc...i tried only mild steel(plain)and copper....i will have to try.

Loading...
0 / 00Unsaved Playlist Return to active list
    1. Your queue is empty. Add videos to your queue using this button:
      or sign in to load a different list.
    Loading...Loading...Saving...
    • Clear all videos from this list
    • Learn more