Good pull gone bad at big lick may 2009

[ps3dethman1]

good fight u-bolts!

[walt7983]

For those people saying chevy don't have a good axle you don't know much the Corp. 14 bolt full floater is one of the best I pull and even the ford guys swap out to a 14 bolt. All this guy had happen was the ubolts broke or stretch Wich isn't that uncommon when you see what these trucks are put threw. So you ford people should hook to the sled and see you will break just as much as a chevy.

[TruckPullin100]

Just a drive shaft bust?? Dear If i could count the number of times I've seen this happen..

[AirsoftReviewerz]

thats what you get if your a chevy tool

[dawangprod]

Someone put the rear end in backwards!!!!

[XxClemsonTigersXx]

he's still got front wheel drive!

[twotone505]

Traction bars would have saved that.

[unidentifiedbomb]

way to bring hydraulics into the pulling game

[Psi4tsi]

Kanuter Valve let go....

[mrjurun]

@Psi4tsi I think he lost his kanibbity pin somewhere on the jam flange

[tomcatdcn]

a dodge wouldn't have done that =P

[homelesspimps]

@tomcatdcn the hell it wouldn't!!!!! i have seen worse from a dodge

[wcu19460]

What gears do those things run to be revving like that at such a slow speed? 8.82?

[HarleyJones101291]

@wcu19460 they run higher numerical gearing in the tcase or trans

my dads old truck was set up with like 5.72's but was a purposebuilt 1 speed trans

[HemiDart]

GM NEVER made a strong rear end. Mopar had the Dana 60. Ford 9"

[TurboIDI]

@HemiDart no.. dana had the dana 60. ford had the sterling 10.25 10.50 and 9". maybe someday Chevy and dodge will learn how to build nice things aswell.

[LastWillandTesticle]

@TurboIDI You missunderstood my statement. '66-'71 Mopar Muscle cars (HEMI, 440-6) had the option to have a Dana 60. The SS '68 Hemi Darts/Barracuda's autos came w/ 8¾ w/ the option for a Dana 60. '94-'02 Dodge Cummins came w/ a Dana 80. GM muscle cars got a 12 bolt...which won't hold up to much.

[TurboIDI]

@LastWillandTesticle haha I understood what you're saying, I was just giving you a hard time because dodge doesn't make their own axles.

[mike4x4chevy48]

@HemiDart They made the fully floating 14 bolt Corporate rear end; which is comparable to a Dana 80...

[HemiDart]

Chevy Crap....

[papabugs71]

Correction: Broke everything from the ENGINE back. . . .

[AtariFTW]

BROKE THE FUCKING U-BOLTS!!!

[condor12341]

that proves chevy is a piece of shit so lesson be learnd

[03sto]

@condor12341 Getting axle wrap from too much torque and traction makes it a piece of shit? learn what about what happened before you make uneducated comments...

[sn1pedyou]

@condor12341 lol coming from someone who im guessing isn't even old enough to drive, oh and cant spell

[homelesspimps]

@condor12341 hahahaha you're an ignorant little bitch. just because it broke doesn't mean shit. Every car is going to break, it's inevitable, EVERY car, no matter what company it came from

[yamahayea]

There's a very good reason why you dont pull with boggers !!!

[3029dz]

Tube spun and grenade'd the case right?

[47485ksc]

This is a perfect example of why you see so many home made utility trailers made out of Chevy truck beds. Fords and Dodge, too. Never see any International truck bed trailers, do you? They are pulling the Chevy, etc. truck bed trailers.

[allbiz2k10]

@47485ksc hIc

[madtownmadman]

@47485ksc Yeah, you never see any International pickup trucks because most of them are has beens. Their production #'s were very slim by comparison.

[theshootercody]

That truck needs a smaller pair of balls, The shaft couldn't handle it :P

[NP535overdrive]

the widdle axles...awww

[bruce1D]

two words: trac bars

[redracer450r]

it only wanted to sit down... didnt have to be like that

[MercuryMorrison1]

lol only a bunch of Chevy nutswingers would praise a truck for breaking down.

[BlackLabel7345]

@MercuryMorrison1 he must have had FORD rear in that hahahaha take that

[homelesspimps]

@MercuryMorrison1 FORD sucks, straight up. I could find just as many ford or dodge trucks breaking as you could with chevy

[disorderlyconduct97]

to much chevy power

[DeRex9]

instant low-rider?

[lexusowner]

i said "oh" when everyone else said "oh". funny as shit.

[SPDKNGG]

You gotta pay to play!... lol

[xpfuzz]

if he would have welded the axle tubes to the center section that wouldn`t have happened...but when ya got chevy power shit breaks...

[JustShutUpNWatch]

Well i liked the truck before i saw what happened to it...

[creativeinventor]

Chuck Norris could have pulled it with his teeth...

[54mgolden]

the claawwwwwww!

[omgwtfbbqgtfo]

daaaamn that's crazy. the driveshaft fell righ off lol

[Kahlo69]

keep pushing 6. hahahahahahaha

[1diesellover]

well thares your problem ... its a chevy

[137bandit]

typical chevy

[transamfan81]

Wtf. he completely spun the rear around. Thats wild

[milkman424]

and a stronger frame lol. them bars looked like the ripped through or the bolts broke.

[milkman424]

lol might need a stronger ladder bars.

[nationalharvester]

too much tire

[TheSwaggBotz]

pussy ass trucks they need my truck only the best

[RC7741]

@TheSwaggBotz Well arent you just full of yourself, your just jealous because this truck will pull the trailer you live in off the fuckin platform... try again.

[yamahonkawazuki]

@RC7741 ehh we'll find out when he posts his first video Eh? lol

[TheSwaggBotz]

@TheSwaggBotz that shit is nothing

[gumboglutton]

Ya 9" good for car drags but not pulls. I like 14 bolt

[bigorangetrucker]

Shoulda used a Ford 9". Then you wouldnt of had that problemo

[JustinHansen6669]

@bigorangetrucker. iv seen people put ford 9'' under their trucks and rip them apart... knew a guy that had an 87 custom delux with a chevy 527 pushin out 620 @ 5500 and 650lb of torque at 4500 and a ford 9'' it works pretty good for awhile when he was just crusin but when he went to the sled pulls he didnt even cross the 150 mark. they found pieces of the rear end everywhere. a piece of the case actually went through the bed. found it then next mornin when we tore it apart

[bigorangetrucker]

Its called a stronger case. Obviously a stock 9" third member isn't gonna hold that kinda power dumbass, but you drive a chevy so you already knew that. DER!

Driving a chevy is like letting a bunch of 5 year olds loose in a fine dinnerware store; somethings gonna break, GUARANTEED!

[gumper1986]

I like how the driver takes a header into the steering wheel when it breaks.

[jevic100]

i was their when that happen

[faded2blak]

and thats why we created trac bars

[titan56l]

i could hear it the whole time! cringing then bang! semi floating axles slide out a bit haha! get full floating bud!

[jammmes2007]

lmfao when it said take a closer look i though it ment the arm. that he had ran someone over

[wisenbc5812]

Thats obviously factory.

[TipikulBob]

This isn't a matter of a Chevy being crappy, or a junk axle..... he broke his u-bolts.

[justanamelol6969]

needs track bars

[kevijdabeast]

SHOULDA GOT A TORSION BAR!!

[79broncoDUDE]

should have got a ford!!!!!

[nodd89]

bahahahahahahahahahahahahahaha­hahahaha

[joedrummer2010]

You twats - his u-bolts broke or stretched, and the axle turned. That's the diff yoke you see that is now on the BACK side of the axle.

It wasn't a matter of not being a 14 bolt, or the drive shaft falling off, or any of the other explanations you non-mechanically-inclined people are saying - he stretched or broke the u-bolts.

[macfletcherhotmail]

@joedrummer2010 ive seen something like this before but it happend in english grass track racing a driver set off from the start line and shifted into 2nd and the axle turned around just like because the bolts that held the axel to the leaf springs shired

[greenjeep92]

@joedrummer2010 If he wouldnt have had Auto parts store crap this wouldnt have happened. Ruffstuffspecialties has beef

[smokeshow1984]

@greenjeep92 do you know how many pulls he's gotten out of that axle. i don't but i bet alot more then 1. my motto is giver till she breaks. awesome truck nice to see a person build up an oldy. and ya to the people that say its a piece of crap stock axle, it was the universal joint that broke who hasn't broke one of those.

[mmike422]

he almost made it

[ruizhernandeztrustfi]

Loop it to 0:21 - 0:22 continously to make a real good ringtone. :)

[cazman94]

the trucks just to bad ass he cant help it

[spaztack]

I tink jor drive chaft fell off.

[UberUser1977]

Not a 14 bolt I take it.

[samueldian95]

hey, shit happens. get over it

[rangaman86]

Wheres the song?? that, like a rock one by bobby!!! lol... truck was kinda sitting there at the end.... kinda like a rock

[showtime583]

That just plain SUCKS, but been there. Just have to put better and bigger parts back into it when you rebuild or as money allows. Lets face it none of us are getting rich pulling

[rockbaby20]

fuckin sick truck

[protokingg]

i was there when this happened

[pbplayer91]

Yea just a lot of stress on those parts. stuff happens. Good looking truck.

[pbplayer91]

not the tires. It was just a weak ujoint part under a lot of stress and snaps. happens.

[CarlEdwards099]

@pbplayer91 broke rear end and driveshaft and ujoint

[jt4265]

oouch that thing got murdered. time for ladder bars and a bigger axle. nice truck tho that thing sounds good.

[BlkDirtyMax]

@jt4265 ladder bars are the key point in this fix ;-)

[crenshaw502]

whats the song in the beginning?

[gpgab971]

@crenshaw502 Lamb of God Blood of the Scribe i believe.

[bfield2009]

when you make power an have bite. you will find a week link

[RMLREDMedia]

@bfield2009 Thats what pulling is all about.

[RMLREDMedia]

Every truck in the class uses this tire, stop saying it was the wrong tire.

[79Truckpullin]

Wrong tire!!! I would never run a tire like that

[sonymclaren]

Thats what four links are for to prevent axle wrap...

[CedrikTheManiac00]

the dif made a 180 on himself and was still on the ruck,, amzing lol

[thumperdog383]

boggers + chevy power = carnege

all in a days play

[blownutsmyass]

@thumperdog383 bogger + a real truck = wont break

[greenjeep92]

@blownutsmyass Agreed...Bad weld here, axle wrap, ect.. IMO

[greenjeep92]

@blownutsmyass Agreed...Bad weld here, axle wrap, ect.. IMO

[blownutsmyass]

@greenjeep92 i was just being a pecker head about that guy thinking because its a chevy means it has lots of power and thats why it breaks. he has no idea that there are trucks puting down way more power and still dont break like that even with stock drive train. later bro

[redsoxtyler20]

@thumperdog383 i run boggers on my truck and if the track is just a littl bit sloppy, they bite like mofos

[warcorpse94]

i go there alot

[AustinC5570]

Gahh.. man that blows

[Dodgeram901]

axle wrap......gets 'em everytime

[TheCummins03]

Big problem i see is his tires being superswamper bogger's. wrong tire for sled pulling.

[DELREBEL]

@TheCummins03 if they are radials yes, bias wont bounce or flex -- friend of mine has swampers for pulling been having decent luck with them

[nicknashley09]

thats crazy.

[redneck9998]

damn

[bigbadbronco86]

bet he is sorry he had all those ads for his company on there now lmao can we say never use that guy haha

[cowboycratty]

oh that suck