@h2opower WOW im goona need a henry meter and some wire i was using transformer wire i dismantled took me a couple of hours to wind by hand how did you wind your choke but i did only maybe 100 winds thats probably why im not getting amp restriction
@theoneagain that all depends on what it is you are trying to run. From looking at your vidios, I'd go with 20-18 wire so that it stays on the cool side. The 8xa circuit is Meyer's old stuff but it works well with large plate cells. If your up to it make a plate cell with 4 n plates all space .0075inch apart using plastic shim stock. The plates have to be minimum of 12 x 8 and you will need +nnnn-nnnn+nnnn-nnnn+nnnn- giving a total of 25 plates. With that close of a space gap your giong to rule.
@irondmax Hi Irondmax, you wired you WFC in series? How many capacitors does your WFC exciter array have? My new one will have 12 capacitors wired in series which will lower the load on the system drastically for that is how the WFC becomes a part of the VIC circuit in the form of resistance. So far I thought I was the only one doing this as I haven't seen anyone else wiring their WFC's in series.
i give this 8xa circuit away on youtube last christmas
i have lots of videos dealing with meyers stuff, distilled water strait from a sealed jug and rain water and city water, no electrolyte...........lots of bubbles brother
Distilled water!!! Way to go.Good work.Seems alot of people miss the point that if your doing it with no electrolyte then you are definatley out of the realms of Faraday electrolysis and into Stanley Meyers process.Keep up the good work.
@hhoguy98 All of the stuff found in the international independent test evaluation seems to check out thus far. The way Meyer wired the WFC made all the difference in the world. I am building a new WFC that will take full advantage of what Stanley Meyer did and perhaps even run my car with it. I haven't run the numbers for the gas production as compared to the prior state of the art but this is using distilled water with no salts added of any kind. I will put out gas amounts with the new WFC.
how many turns on that choke is it on a ecore
theoneagain 3 months ago
@theoneagain The chokes are 2 H approximately 600 turns each.
h2opower 3 months ago
@h2opower is that bifilar or on two seperate cores
theoneagain 3 months ago
@theoneagain It's using bifilar wire on one core. It works a lot better with a 16 H chokes at approximately 2k turns bifilar wire on a single core.
h2opower 3 months ago
@h2opower WOW im goona need a henry meter and some wire i was using transformer wire i dismantled took me a couple of hours to wind by hand how did you wind your choke but i did only maybe 100 winds thats probably why im not getting amp restriction
theoneagain 3 months ago
what guiage do you recogn is the best?
theoneagain 3 months ago
@theoneagain that all depends on what it is you are trying to run. From looking at your vidios, I'd go with 20-18 wire so that it stays on the cool side. The 8xa circuit is Meyer's old stuff but it works well with large plate cells. If your up to it make a plate cell with 4 n plates all space .0075inch apart using plastic shim stock. The plates have to be minimum of 12 x 8 and you will need +nnnn-nnnn+nnnn-nnnn+nnnn- giving a total of 25 plates. With that close of a space gap your giong to rule.
h2opower 3 months ago
hey dude
i did this already and posted it
irondmax 9 months ago
@irondmax Hi Irondmax, you wired you WFC in series? How many capacitors does your WFC exciter array have? My new one will have 12 capacitors wired in series which will lower the load on the system drastically for that is how the WFC becomes a part of the VIC circuit in the form of resistance. So far I thought I was the only one doing this as I haven't seen anyone else wiring their WFC's in series.
h2opower 9 months ago
@h2opower you should check my videos man
i give this 8xa circuit away on youtube last christmas
i have lots of videos dealing with meyers stuff, distilled water strait from a sealed jug and rain water and city water, no electrolyte...........lots of bubbles brother
your post is a good video by the way
irondmax 9 months ago
bravo
metronome13 9 months ago
Distilled water!!! Way to go.Good work.Seems alot of people miss the point that if your doing it with no electrolyte then you are definatley out of the realms of Faraday electrolysis and into Stanley Meyers process.Keep up the good work.
m3sca1 9 months ago
@m3sca1 Will do my freind will do ;-)
h2opower 9 months ago
HHO, the 8XA circuit was a very created very early in Stans experimentation.
any idea how much gas was being produced and how this production rate relates to straight electrolysis??
300V x 2A = 600W. I can see why your choke needed to be fan cooled!
Interesting video.
hhoguy98 9 months ago
@hhoguy98 All of the stuff found in the international independent test evaluation seems to check out thus far. The way Meyer wired the WFC made all the difference in the world. I am building a new WFC that will take full advantage of what Stanley Meyer did and perhaps even run my car with it. I haven't run the numbers for the gas production as compared to the prior state of the art but this is using distilled water with no salts added of any kind. I will put out gas amounts with the new WFC.
h2opower 9 months ago