what should i buy? belt cp v2 or a honey bee fixed pitch? i already know how to fly inverted on big lama coaxial helicopter, not great power against wind...
I have this chuppa too, and i think its dead cheap for so advanced chupper. I definently recommend buying carbon fibre blades, wooden ones crack in notime, and they are clumsier.
Co-axial is a tail-less helicopter. There are two main blades which spin in opposite directions at the same speeds to cancel out the torque, which means no need for a tail.
co axial means that there are 2 rotors on the top of the heli, possibly a vertical gyro on the tail, and the twin main rotors spin in different directions making the helicopter more stable.
Have been all over Youtube, and I love the very direct and ease of understanding what the gyro does! I bought the heli months ago, but would like to see more of this type of tutorial vids prior to "take off!"...thanks.
I take a draft as the one that one sees in this video in a belt cp and have a problem the tail does not support his(her,your) this position turning constant. Very slow but not for of turning
hi,my honeybee wont stop spinning!! if i try to hold it one way it will spin that way hold it the other way,itspins the other way!! any help or advice would be great. it has new esky gyro,not head lock,new motor and esc new servos.thanks
the point of this video is: the b-version of the esky-h-gyro does not work satisfyingly with the old standard-controller (the tail swings despite of rate-modus=key switch down ...) ... its the fault of esky...
i'm not sure what the point of this video is. There are already many indoor "turntable" videos of the 0704A showing the same thing. Because this unit is so new, what would be helpfull is an actual in-flight demonstration/review of the product.
i set the same setting that you did but it does not work i have the same gyro that you do i have to hold the stick all the way to the left to get it to hold you got yours working real good what do you think i could do to make mine work that good
Really helpful and well made video for those who don't (or didn't!) know what the gyro on a heli is for, thanks for uploading! :)
unicorn7337 8 months ago
I saw your video and saw that uses two round tablets, you could give me details of how to make this bench?
you could remove the bench in his video and show details of it disassembled?
email : andremecanico@bol.com.br
andremecanico 10 months ago
I used a serving dish whith a Turning function like this:
ikea.com/gb/en/catalog/products/90074483
cabrante 10 months ago
This has been flagged as spam show
does it come with the gyro
jellymnbvcxz 1 year ago
does it come with the gyro
jellymnbvcxz 1 year ago
Does it work with my Standart Gyro?
TheSimikolon 1 year ago
nice video mate keep up the good work
694069406940 1 year ago
what should i buy? belt cp v2 or a honey bee fixed pitch? i already know how to fly inverted on big lama coaxial helicopter, not great power against wind...
heberorozco 1 year ago
@heberorozco you can't fly inverted on a co-axial heli!
SuperDiecast 1 year ago
@SuperDiecast sorry i wanted to say "Fly nose in" lol
heberorozco 1 year ago
Ps: Too bad its winter in finland :DDd
SadOlympist 2 years ago
I have this chuppa too, and i think its dead cheap for so advanced chupper. I definently recommend buying carbon fibre blades, wooden ones crack in notime, and they are clumsier.
SadOlympist 2 years ago
cool thats a good demonstration of what that does
musicman1232 2 years ago
great you figured out what a giro does
llniconll 2 years ago
i have a king 2 also how do i set the trimming in order for the tail rotor not to spin the heli in circles i have no idea on how to set the trimming?
johnnyfisalive 2 years ago
can someone help me my? king2 is vibrating like hell even though blades are tracked and every part is new
wdf4 2 years ago
Co-axial is a tail-less helicopter. There are two main blades which spin in opposite directions at the same speeds to cancel out the torque, which means no need for a tail.
WolvesAndChocolate 2 years ago
co axial means that there are 2 rotors on the top of the heli, possibly a vertical gyro on the tail, and the twin main rotors spin in different directions making the helicopter more stable.
PepsiRemix5 2 years ago
What's co-axle???
YouWatchingMyVideo 2 years ago
try flying without a gyro :)
rollafatonedude 2 years ago
when you open the hbk2 are you suposed to tighten the tail and main roter?? help!
extrehound93 2 years ago
I like the video and the music, however it is NOT gyro off !! Its gyro in rate mode--switch up--gyro in Heading Hold--switch down.
dougsrccom 2 years ago
We have a Belt Cp V2 2.4 Ghz with Gyro i love it we can good fly with him...:)
Supermann95 2 years ago
great
miguelitotiena 2 years ago
tune you gyro up a little more it's a little lagy
shockflyyer3d 2 years ago
Have been all over Youtube, and I love the very direct and ease of understanding what the gyro does! I bought the heli months ago, but would like to see more of this type of tutorial vids prior to "take off!"...thanks.
jasonalara 2 years ago
Can you tell me the name of the music please?
dkt2679 2 years ago
it is easy to fly it? i gonna by one and i never had flyed that big rc helicopter before
michigan977 2 years ago
nice video!
xxaaeerroo 2 years ago
I agree with Skippy; well done Cabrante!
Djaevu 3 years ago
I take a draft as the one that one sees in this video in a belt cp and have a problem the tail does not support his(her,your) this position turning constant. Very slow but not for of turning
huesecina 3 years ago
OK, the music may be odd. However this is going into my favorites. Never before has anyone show in such a simple way how a gyro works. Great job!
skippy7399 3 years ago
even the gyro is on, it loses the track.
qrrak 3 years ago
Can you make a video on how you made your lazy susan
Helipro3218 3 years ago
hi,my honeybee wont stop spinning!! if i try to hold it one way it will spin that way hold it the other way,itspins the other way!! any help or advice would be great. it has new esky gyro,not head lock,new motor and esc new servos.thanks
minititan10 3 years ago
is esky 0704b work with stock tx(0406a)???
mrjinglezz 3 years ago
how much it cost?
hiilleiz 3 years ago
$119.88eBay<de
DrTurkish28 3 years ago
the point of this video is: the b-version of the esky-h-gyro does not work satisfyingly with the old standard-controller (the tail swings despite of rate-modus=key switch down ...) ... its the fault of esky...
macem63 3 years ago
wat is the switch on the right
yiyp 3 years ago
Thank you very much for the info.
kuncai 3 years ago
im planning on getting one and i have a quick qusetion do the blades automaticly pitch as the heli throttles up or do you do it manually
nibbler125 3 years ago
pitch is mixed with throtle, more throttle on TX = higher pitch on blades & rpm on head
MisoRC 3 years ago
i'm not sure what the point of this video is. There are already many indoor "turntable" videos of the 0704A showing the same thing. Because this unit is so new, what would be helpfull is an actual in-flight demonstration/review of the product.
nighthawk0077 3 years ago
i set the same setting that you did but it does not work i have the same gyro that you do i have to hold the stick all the way to the left to get it to hold you got yours working real good what do you think i could do to make mine work that good
Buck8082 3 years ago
is the contoller the standard one that comes with the the hbk2. as supplyer said you need a different one thanks
indecisiff 3 years ago
The controller is the standard 6CH CCPM Transmitter (EK2-0406A) that comes with the Honey Bee King 2 and Belt-CP.
cabrante 3 years ago
you might need to trim the creep out of the rear servo
martyn2186 2 years ago
What do you have the DELAY pot set at???
anderdoug101 3 years ago
You can see how I have set the DELAY at the beginning (0:12) of this video.
cabrante 3 years ago